diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index beda04a..81209ca 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -81,15 +81,6 @@ static int missing_delay[2] = {-1, -1};
 module_param_array(missing_delay, int, NULL, 0);
 MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
 
-static int mpt2sas_fwfault_debug;
-MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
-	"and halt firmware - (default=0)");
-
-static int disable_discovery = -1;
-module_param(disable_discovery, int, 0);
-MODULE_PARM_DESC(disable_discovery, " disable discovery ");
-
-
 /* diag_buffer_enable is bitwise
  * bit 0 set = TRACE
  * bit 1 set = SNAPSHOT
@@ -102,6 +93,14 @@ module_param(diag_buffer_enable, int, 0);
 MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
     "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
 
+static int mpt2sas_fwfault_debug;
+MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
+    "and halt firmware - (default=0)");
+
+static int disable_discovery = -1;
+module_param(disable_discovery, int, 0);
+MODULE_PARM_DESC(disable_discovery, " disable discovery ");
+
 /**
  * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
  *
@@ -692,7 +691,6 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 		memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 	}
 	ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
-
 	complete(&ioc->base_cmds.done);
 	return 1;
 }
@@ -3472,58 +3470,6 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 }
 
 /**
- * mpt2sas_port_enable_done - command completion routine for port enable
- * @ioc: per adapter object
- * @smid: system request message index
- * @msix_index: MSIX table index supplied by the OS
- * @reply: reply message frame(lower 32bit addr)
- *
- * Return 1 meaning mf should be freed from _base_interrupt
- *        0 means the mf is freed from this function.
- */
-u8
-mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
-	u32 reply)
-{
-	MPI2DefaultReply_t *mpi_reply;
-	u16 ioc_status;
-
-	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
-	if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
-		return 1;
-
-	if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED)
-		return 1;
-
-	ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE;
-	if (mpi_reply) {
-		ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID;
-		memcpy(ioc->port_enable_cmds.reply, mpi_reply,
-		    mpi_reply->MsgLength*4);
-	}
-	ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING;
-
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
-		ioc->port_enable_failed = 1;
-
-	if (ioc->is_driver_loading) {
-		if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-			mpt2sas_port_enable_complete(ioc);
-			return 1;
-		} else {
-			ioc->start_scan_failed = ioc_status;
-			ioc->start_scan = 0;
-			return 1;
-		}
-	}
-	complete(&ioc->port_enable_cmds.done);
-	return 1;
-}
-
-
-/**
  * _base_send_port_enable - send port_enable(discovery stuff) to firmware
  * @ioc: per adapter object
  * @sleep_flag: CAN_SLEEP or NO_SLEEP
@@ -3534,151 +3480,67 @@ static int
 _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 {
 	Mpi2PortEnableRequest_t *mpi_request;
-	Mpi2PortEnableReply_t *mpi_reply;
+	u32 ioc_state;
 	unsigned long timeleft;
 	int r = 0;
 	u16 smid;
-	u16 ioc_status;
 
 	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
 
-	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
+	if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
 		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
 		    ioc->name, __func__);
 		return -EAGAIN;
 	}
 
-	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
+	smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
 		return -EAGAIN;
 	}
 
-	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
+	ioc->base_cmds.status = MPT2_CMD_PENDING;
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->port_enable_cmds.smid = smid;
+	ioc->base_cmds.smid = smid;
 	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
 	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
+	mpi_request->VF_ID = 0; /* TODO */
+	mpi_request->VP_ID = 0;
 
-	init_completion(&ioc->port_enable_cmds.done);
 	mpt2sas_base_put_smid_default(ioc, smid);
-	timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done,
+	init_completion(&ioc->base_cmds.done);
+	timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
 	    300*HZ);
-	if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) {
+	if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
 		printk(MPT2SAS_ERR_FMT "%s: timeout\n",
 		    ioc->name, __func__);
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2PortEnableRequest_t)/4);
-		if (ioc->port_enable_cmds.status & MPT2_CMD_RESET)
+		if (ioc->base_cmds.status & MPT2_CMD_RESET)
 			r = -EFAULT;
 		else
 			r = -ETIME;
 		goto out;
-	}
-	mpi_reply = ioc->port_enable_cmds.reply;
+	} else
+		dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
+		    ioc->name, __func__));
 
-	ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
-		printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n",
-		    ioc->name, __func__, ioc_status);
+	ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
+	    60, sleep_flag);
+	if (ioc_state) {
+		printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
+		    " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
 		r = -EFAULT;
-		goto out;
 	}
  out:
-	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
-	printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ?
-	    "SUCCESS" : "FAILED"));
+	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
+	printk(MPT2SAS_INFO_FMT "port enable: %s\n",
+	    ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
 	return r;
 }
 
 /**
- * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
- * @ioc: per adapter object
- *
- * Returns 0 for success, non-zero for failure.
- */
-int
-mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc)
-{
-	Mpi2PortEnableRequest_t *mpi_request;
-	u16 smid;
-
-	printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
-
-	if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
-		printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx);
-	if (!smid) {
-		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
-		    ioc->name, __func__);
-		return -EAGAIN;
-	}
-
-	ioc->port_enable_cmds.status = MPT2_CMD_PENDING;
-	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
-	ioc->port_enable_cmds.smid = smid;
-	memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
-	mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
-
-	mpt2sas_base_put_smid_default(ioc, smid);
-	return 0;
-}
-
-/**
- * _base_determine_wait_on_discovery - desposition
- * @ioc: per adapter object
- *
- * Decide whether to wait on discovery to complete. Used to either
- * locate boot device, or report volumes ahead of physical devices.
- *
- * Returns 1 for wait, 0 for don't wait
- */
-static int
-_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc)
-{
-	/* We wait for discovery to complete if IR firmware is loaded.
-	 * The sas topology events arrive before PD events, so we need time to
-	 * turn on the bit in ioc->pd_handles to indicate PD
-	 * Also, it maybe required to report Volumes ahead of physical
-	 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
-	 */
-	if (ioc->ir_firmware)
-		return 1;
-
-	/* if no Bios, then we don't need to wait */
-	if (!ioc->bios_pg3.BiosVersion)
-		return 0;
-
-	/* Bios is present, then we drop down here.
-	 *
-	 * If there any entries in the Bios Page 2, then we wait
-	 * for discovery to complete.
-	 */
-
-	/* Current Boot Device */
-	if ((ioc->bios_pg2.CurrentBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
-	/* Request Boot Device */
-	   (ioc->bios_pg2.ReqBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED &&
-	/* Alternate Request Boot Device */
-	   (ioc->bios_pg2.ReqAltBootDeviceForm &
-	    MPI2_BIOSPAGE2_FORM_MASK) ==
-	    MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED)
-		return 0;
-
-	return 1;
-}
-
-
-/**
  * _base_unmask_events - turn on notification for this event
  * @ioc: per adapter object
  * @event: firmware event
@@ -4100,7 +3962,6 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
  skip_init_reply_post_host_index:
 
 	_base_unmask_interrupts(ioc);
-
 	r = _base_event_notification(ioc, sleep_flag);
 	if (r)
 		return r;
@@ -4108,18 +3969,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	if (sleep_flag == CAN_SLEEP)
 		_base_static_config_pages(ioc);
 
-
-	if (ioc->is_driver_loading) {
-
-
-
-		ioc->wait_for_discovery_to_complete =
-		    _base_determine_wait_on_discovery(ioc);
-		return r; /* scan_start and scan_finished support */
-	}
-
-
-	if (ioc->wait_for_discovery_to_complete && ioc->is_warpdrive) {
+	if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) {
 		if (ioc->manu_pg10.OEMIdentifier  == 0x80) {
 			hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 &
 			    MFG_PAGE10_HIDE_SSDS_MASK);
@@ -4128,6 +3978,13 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		}
 	}
 
+	if (ioc->wait_for_port_enable_to_complete) {
+		if (diag_buffer_enable != 0)
+			mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
+		if (disable_discovery > 0)
+			return r;
+	}
+
 	r = _base_send_port_enable(ioc, sleep_flag);
 	if (r)
 		return r;
@@ -4264,10 +4121,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
 
-	/* port_enable command bits */
-	ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
-	ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED;
-
 	/* transport internal command bits */
 	ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
 	ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
@@ -4309,6 +4162,8 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 		goto out_free_resources;
 	}
 
+	init_completion(&ioc->shost_recovery_done);
+
 	for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
 		ioc->event_masks[i] = -1;
 
@@ -4331,6 +4186,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 		_base_update_missing_delay(ioc, missing_delay[0],
 		    missing_delay[1]);
 
+	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 
  out_free_resources:
@@ -4348,7 +4204,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	kfree(ioc->scsih_cmds.reply);
 	kfree(ioc->config_cmds.reply);
 	kfree(ioc->base_cmds.reply);
-	kfree(ioc->port_enable_cmds.reply);
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->pfacts);
@@ -4388,7 +4243,6 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->ctl_cmds.sense);
 	kfree(ioc->base_cmds.reply);
-	kfree(ioc->port_enable_cmds.reply);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
 	kfree(ioc->scsih_cmds.reply);
@@ -4430,20 +4284,6 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 			mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
 			complete(&ioc->base_cmds.done);
 		}
-		if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) {
-			ioc->port_enable_failed = 1;
-			ioc->port_enable_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid);
-			if (ioc->is_driver_loading) {
-				ioc->start_scan_failed =
-				    MPI2_IOCSTATUS_INTERNAL_ERROR;
-				ioc->start_scan = 0;
-				ioc->port_enable_cmds.status =
-						MPT2_CMD_NOT_USED;
-			} else
-				complete(&ioc->port_enable_cmds.done);
-
-		}
 		if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
 			ioc->config_cmds.status |= MPT2_CMD_RESET;
 			mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
@@ -4509,6 +4349,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 {
 	int r;
 	unsigned long flags;
+	u8 pe_complete = ioc->wait_for_port_enable_to_complete;
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
@@ -4555,8 +4396,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	/* If this hard reset is called while port enable is active, then
 	 * there is no reason to call make_ioc_operational
 	 */
-	if (ioc->is_driver_loading && ioc->port_enable_failed) {
-		ioc->remove_host = 1;
+	if (pe_complete) {
 		r = -EFAULT;
 		goto out;
 	}
@@ -4570,6 +4410,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 	ioc->ioc_reset_in_progress_status = r;
 	ioc->shost_recovery = 0;
+	complete(&ioc->shost_recovery_done);
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 	mutex_unlock(&ioc->reset_in_progress_mutex);
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 3c3babc..59354db 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,11 +69,11 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"10.100.00.00"
-#define MPT2SAS_MAJOR_VERSION		10
+#define MPT2SAS_DRIVER_VERSION		"09.100.00.01"
+#define MPT2SAS_MAJOR_VERSION		09
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
-#define MPT2SAS_RELEASE_VERSION		00
+#define MPT2SAS_RELEASE_VERSION		01
 
 /*
  * Set MPT2SAS_SG_DEPTH value based on user input.
@@ -655,12 +655,7 @@ enum mutex_type {
  * @ignore_loginfos: ignore loginfos during task management
  * @remove_host: flag for when driver unloads, to avoid sending dev resets
  * @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_discovery_to_complete: flag set at driver load time when
- *                                               waiting on reporting devices
- * @is_driver_loading: flag set at driver load time
- * @port_enable_failed: flag set when port enable has failed
- * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
- * @start_scan_failed: means port enable failed, return's the ioc_status
+ * @wait_for_port_enable_to_complete:
  * @msix_enable: flag indicating msix is enabled
  * @msix_vector_count: number msix vectors
  * @cpu_msix_table: table for mapping cpus to msix index
@@ -795,20 +790,15 @@ struct MPT2SAS_ADAPTER {
 	u8		shost_recovery;
 
 	struct mutex	reset_in_progress_mutex;
+	struct completion	shost_recovery_done;
 	spinlock_t 	ioc_reset_in_progress_lock;
 	u8		ioc_link_reset_in_progress;
-	u8		ioc_reset_in_progress_status;
+	int		ioc_reset_in_progress_status;
 
 	u8		ignore_loginfos;
 	u8		remove_host;
 	u8		pci_error_recovery;
-	u8		wait_for_discovery_to_complete;
-	struct completion	port_enable_done;
-	u8		is_driver_loading;
-	u8		port_enable_failed;
-
-	u8		start_scan;
-	u16		start_scan_failed;
+	u8		wait_for_port_enable_to_complete;
 
 	u8		msix_enable;
 	u16		msix_vector_count;
@@ -824,13 +814,11 @@ struct MPT2SAS_ADAPTER {
 	u8		scsih_cb_idx;
 	u8		ctl_cb_idx;
 	u8		base_cb_idx;
-	u8		port_enable_cb_idx;
 	u8		config_cb_idx;
 	u8		tm_tr_cb_idx;
 	u8		tm_tr_volume_cb_idx;
 	u8		tm_sas_control_cb_idx;
 	struct _internal_cmd base_cmds;
-	struct _internal_cmd port_enable_cmds;
 	struct _internal_cmd transport_cmds;
 	struct _internal_cmd scsih_cmds;
 	struct _internal_cmd tm_cmds;
@@ -1013,8 +1001,6 @@ void mpt2sas_base_release_callback_handler(u8 cb_idx);
 
 u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
     u32 reply);
-u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
-	u8 msix_index,	u32 reply);
 void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
 
 u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
@@ -1029,8 +1015,6 @@ void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_ty
 
 void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
 
-int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
-
 /* scsih shared API */
 u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
     u32 reply);
@@ -1048,8 +1032,6 @@ struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAP
 struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
     struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
 
-void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
-
 void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
 
 /* config shared API */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 36ea0b2..2b11010 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -1356,9 +1356,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 	Mpi2ConfigReply_t mpi_reply;
 	int r, i, config_page_sz;
 	u16 ioc_status;
-	int config_num;
-	u16 element_type;
-	u16 phys_disk_dev_handle;
 
 	*volume_handle = 0;
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
@@ -1374,53 +1371,35 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 	if (r)
 		goto out;
 
+	mpi_request.PageAddress =
+	    cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG);
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
 	config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
 	config_page = kmalloc(config_page_sz, GFP_KERNEL);
-	if (!config_page) {
-		r = -1;
+	if (!config_page)
 		goto out;
-	}
-	config_num = 0xff;
-	while (1) {
-		mpi_request.PageAddress = cpu_to_le32(config_num +
-		    MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
-		r = _config_request(ioc, &mpi_request, &mpi_reply,
-		    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-		    config_page_sz);
-		if (r)
-			goto out;
-		r = -1;
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+	r = _config_request(ioc, &mpi_request, &mpi_reply,
+	    MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    config_page_sz);
+	if (r)
+		goto out;
+
+	r = -1;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+		goto out;
+	for (i = 0; i < config_page->NumElements; i++) {
+		if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) &
+		    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) !=
+		    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT)
+			continue;
+		if (le16_to_cpu(config_page->ConfigElement[i].
+		    PhysDiskDevHandle) == pd_handle) {
+			*volume_handle = le16_to_cpu(config_page->
+			    ConfigElement[i].VolDevHandle);
+			r = 0;
 			goto out;
-		for (i = 0; i < config_page->NumElements; i++) {
-			element_type = le16_to_cpu(config_page->
-			    ConfigElement[i].ElementFlags) &
-			    MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
-			if (element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
-			    element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
-				phys_disk_dev_handle =
-				    le16_to_cpu(config_page->ConfigElement[i].
-				    PhysDiskDevHandle);
-				if (phys_disk_dev_handle == pd_handle) {
-					*volume_handle =
-					    le16_to_cpu(config_page->
-					    ConfigElement[i].VolDevHandle);
-					r = 0;
-					goto out;
-				}
-			} else if (element_type ==
-			    MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
-				*volume_handle = 0;
-				r = 0;
-				goto out;
-			}
 		}
-		config_num = config_page->ConfigNum;
 	}
  out:
 	kfree(config_page);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index aabcb91..9adb013 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -1207,9 +1207,6 @@ _ctl_do_reset(void __user *arg)
 	if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
 		return -ENODEV;
 
-	if (ioc->shost_recovery || ioc->pci_error_recovery ||
-		ioc->is_driver_loading)
-		return -EAGAIN;
 	dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
 	    __func__));
 
@@ -2181,8 +2178,7 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg)
 		    !ioc)
 			return -ENODEV;
 
-		if (ioc->shost_recovery || ioc->pci_error_recovery ||
-				ioc->is_driver_loading)
+		if (ioc->shost_recovery || ioc->pci_error_recovery)
 			return -EAGAIN;
 
 		if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) {
@@ -2301,8 +2297,7 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg)
 	if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc)
 		return -ENODEV;
 
-	if (ioc->shost_recovery || ioc->pci_error_recovery ||
-			ioc->is_driver_loading)
+	if (ioc->shost_recovery || ioc->pci_error_recovery)
 		return -EAGAIN;
 
 	memset(&karg, 0, sizeof(struct mpt2_ioctl_command));
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 4e041f6..1da1aa1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -71,9 +71,6 @@ static void _firmware_event_work(struct work_struct *work);
 
 static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
 
-static void _scsih_scan_start(struct Scsi_Host *shost);
-static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
-
 /* global parameters */
 LIST_HEAD(mpt2sas_ioc_list);
 
@@ -82,7 +79,6 @@ static u8 scsi_io_cb_idx = -1;
 static u8 tm_cb_idx = -1;
 static u8 ctl_cb_idx = -1;
 static u8 base_cb_idx = -1;
-static u8 port_enable_cb_idx = -1;
 static u8 transport_cb_idx = -1;
 static u8 scsih_cb_idx = -1;
 static u8 config_cb_idx = -1;
@@ -107,18 +103,6 @@ static int max_lun = MPT2SAS_MAX_LUN;
 module_param(max_lun, int, 0);
 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
 
-/* diag_buffer_enable is bitwise
- * bit 0 set = TRACE
- * bit 1 set = SNAPSHOT
- * bit 2 set = EXTENDED
- *
- * Either bit can be set, or both
- */
-static int diag_buffer_enable = -1;
-module_param(diag_buffer_enable, int, 0);
-MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
-	"(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
-
 /**
  * struct sense_info - common structure for obtaining sense keys
  * @skey: sense key
@@ -133,8 +117,8 @@ struct sense_info {
 
 
 #define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC)
-#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
-#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
+#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
+
 /**
  * struct fw_event_work - firmware event struct
  * @list: link list framework
@@ -388,34 +372,31 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	Mpi2SasDevicePage0_t sas_device_pg0;
 	Mpi2ConfigReply_t mpi_reply;
 	u32 ioc_status;
-	*sas_address = 0;
 
 	if (handle <= ioc->sas_hba.num_phys) {
 		*sas_address = ioc->sas_hba.sas_address;
 		return 0;
-	}
+	} else
+		*sas_address = 0;
 
 	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
-		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
-		__FILE__, __LINE__, __func__);
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
 		return -ENXIO;
 	}
 
-	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
-	if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
-		*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
-		return 0;
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
+		    "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+		     __FILE__, __LINE__, __func__);
+		return -EIO;
 	}
 
-	/* we hit this becuase the given parent handle doesn't exist */
-	if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-		return -ENXIO;
-	/* else error case */
-	printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
-	    "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
-	     __FILE__, __LINE__, __func__);
-	return -EIO;
+	*sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+	return 0;
 }
 
 /**
@@ -443,11 +424,7 @@ _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
 	u16 slot;
 
 	 /* only process this function when driver loads */
-	if (!ioc->is_driver_loading)
-		return;
-
-	 /* no Bios, return immediately */
-	if (!ioc->bios_pg3.BiosVersion)
+	if (!ioc->wait_for_port_enable_to_complete)
 		return;
 
 	if (!is_raid) {
@@ -610,15 +587,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
-	     sas_device->sas_address_parent)) {
+	     sas_device->sas_address_parent))
 		_scsih_sas_device_remove(ioc, sas_device);
-		} else if (!sas_device->starget) {
-			if (!ioc->is_driver_loading)
-				mpt2sas_transport_port_remove(ioc,
-				sas_device->sas_address,
-			    sas_device->sas_address_parent);
-			_scsih_sas_device_remove(ioc, sas_device);
-		}
 }
 
 /**
@@ -1430,10 +1400,6 @@ _scsih_slave_destroy(struct scsi_device *sdev)
 {
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct scsi_target *starget;
-	struct Scsi_Host *shost;
-	struct MPT2SAS_ADAPTER *ioc;
-	struct _sas_device *sas_device;
-	unsigned long flags;
 
 	if (!sdev->hostdata)
 		return;
@@ -1441,19 +1407,6 @@ _scsih_slave_destroy(struct scsi_device *sdev)
 	starget = scsi_target(sdev);
 	sas_target_priv_data = starget->hostdata;
 	sas_target_priv_data->num_luns--;
-
-	shost = dev_to_shost(&starget->dev);
-	ioc = shost_priv(shost);
-
-	if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
-		   sas_target_priv_data->sas_address);
-		if (sas_device)
-			sas_device->starget = NULL;
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	}
-
 	kfree(sdev->hostdata);
 	sdev->hostdata = NULL;
 }
@@ -1645,10 +1598,8 @@ _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device)
  * _scsih_get_volume_capabilities - volume capabilities
  * @ioc: per adapter object
  * @sas_device: the raid_device object
- *
- * Returns 0 for success, else 1
  */
-static int
+static void
 _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
     struct _raid_device *raid_device)
 {
@@ -1661,10 +1612,9 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 
 	if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
 	    &num_pds)) || !num_pds) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		return 1;
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
 	}
 
 	raid_device->num_pds = num_pds;
@@ -1672,19 +1622,17 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 	    sizeof(Mpi2RaidVol0PhysDisk_t));
 	vol_pg0 = kzalloc(sz, GFP_KERNEL);
 	if (!vol_pg0) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		return 1;
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
 	}
 
 	if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
 	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
 		kfree(vol_pg0);
-		return 1;
+		return;
 	}
 
 	raid_device->volume_type = vol_pg0->VolumeType;
@@ -1704,7 +1652,6 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
 	}
 
 	kfree(vol_pg0);
-	return 0;
 }
 /**
  * _scsih_disable_ddio - Disable direct I/O for all the volumes
@@ -1975,20 +1922,13 @@ _scsih_slave_configure(struct scsi_device *sdev)
 		     sas_target_priv_data->handle);
 		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 		if (!raid_device) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
-			    __LINE__, __func__));
-			return 1;
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return 0;
 		}
 
 		_scsih_get_volume_capabilities(ioc, raid_device);
 
-		if (_scsih_get_volume_capabilities(ioc, raid_device)) {
-			dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-			    "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
-			    __LINE__, __func__));
-			return 1;
-		}
 		/*
 		 * WARPDRIVE: Initialize the required data for Direct IO
 		 */
@@ -2062,22 +2002,11 @@ _scsih_slave_configure(struct scsi_device *sdev)
 	if (sas_device) {
 		if (sas_target_priv_data->flags &
 		    MPT_TARGET_FLAGS_RAID_COMPONENT) {
-			if (mpt2sas_config_get_volume_handle(ioc,
-			    sas_device->handle, &sas_device->volume_handle)) {
-				dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-				    "failure at %s:%d/%s()!\n", ioc->name,
-				    __FILE__, __LINE__, __func__));
-				return 1;
-			}
-			if (sas_device->volume_handle &&
-			    mpt2sas_config_get_volume_wwid(ioc,
+			mpt2sas_config_get_volume_handle(ioc,
+			    sas_device->handle, &sas_device->volume_handle);
+			mpt2sas_config_get_volume_wwid(ioc,
 			    sas_device->volume_handle,
-			    &sas_device->volume_wwid)) {
-				dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-				    "failure at %s:%d/%s()!\n", ioc->name,
-				    __FILE__, __LINE__, __func__));
-				return 1;
-			}
+			    &sas_device->volume_wwid);
 		}
 		if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
 			qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
@@ -2106,11 +2035,6 @@ _scsih_slave_configure(struct scsi_device *sdev)
 
 		if (!ssp_target)
 			_scsih_display_sata_capabilities(ioc, sas_device, sdev);
-	} else {
-		dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
-		    "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
-		    __func__));
-		return 1;
 	}
 
 	_scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
@@ -2790,43 +2714,22 @@ _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
 
 
 /**
- * _scsih_error_recovery_delete_devices - remove devices not responding
+ * _scsih_queue_rescan - queue a topology rescan from user context
  * @ioc: per adapter object
  *
  * Return nothing.
  */
 static void
-_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
+_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
 {
 	struct fw_event_work *fw_event;
 
-	if (ioc->is_driver_loading)
-		return;
-
-	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
-	if (!fw_event)
+	if (ioc->wait_for_port_enable_to_complete)
 		return;
-
-	fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
-	fw_event->ioc = ioc;
-	_scsih_fw_event_add(ioc, fw_event);
-}
-
-/**
- * mpt2sas_port_enable_complete - port enable completed (fake event)
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-void
-mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct fw_event_work *fw_event;
-
 	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
 	if (!fw_event)
 		return;
-	fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
+	fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
 	fw_event->ioc = ioc;
 	_scsih_fw_event_add(ioc, fw_event);
 }
@@ -3074,27 +2977,14 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	Mpi2SCSITaskManagementRequest_t *mpi_request;
 	u16 smid;
 	struct _sas_device *sas_device;
-	struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
-	u64 sas_address = 0;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
 	unsigned long flags;
 	struct _tr_list *delayed_tr;
-	u32 ioc_state;
 
-	if (ioc->remove_host) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
-		    "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
-		return;
-	} else if (ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
-		    "error recovery: handle(0x%04x)\n", __func__, ioc->name,
-		    handle));
-		return;
-	}
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
-		   "operational: handle(0x%04x)\n", __func__, ioc->name,
-		   handle));
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
+		   "progress!\n", __func__, ioc->name));
 		return;
 	}
 
@@ -3108,18 +2998,13 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	     sas_device->starget->hostdata) {
 		sas_target_priv_data = sas_device->starget->hostdata;
 		sas_target_priv_data->deleted = 1;
-		sas_address = sas_device->sas_address;
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+		    "setting delete flag: handle(0x%04x), "
+		    "sas_addr(0x%016llx)\n", ioc->name, handle,
+		    (unsigned long long) sas_device->sas_address));
 	}
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
-	if (sas_target_priv_data) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
-		"handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
-			(unsigned long long)sas_address));
-		_scsih_ublock_io_device(ioc, handle);
-		sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
-	}
-
 	smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
 	if (!smid) {
 		delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
@@ -3300,21 +3185,11 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	Mpi2SasIoUnitControlRequest_t *mpi_request;
 	u16 smid_sas_ctrl;
-	u32 ioc_state;
 
-	if (ioc->remove_host) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
-		   "removed\n", __func__, ioc->name));
-		return 1;
-	} else if (ioc->pci_error_recovery) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
-		    "error recovery\n", __func__, ioc->name));
-		return 1;
-	}
-	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
-	if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
-		    "operational\n", __func__, ioc->name));
+	if (ioc->shost_recovery || ioc->remove_host ||
+	    ioc->pci_error_recovery) {
+		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
+		   "progress!\n", __func__, ioc->name));
 		return 1;
 	}
 
@@ -5224,7 +5099,7 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
 	/* get device name */
 	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
 
-	if (ioc->wait_for_discovery_to_complete)
+	if (ioc->wait_for_port_enable_to_complete)
 		_scsih_sas_device_init_add(ioc, sas_device);
 	else
 		_scsih_sas_device_add(ioc, sas_device);
@@ -5260,9 +5135,6 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
 	if (sas_device_backup.starget && sas_device_backup.starget->hostdata) {
 		sas_target_priv_data = sas_device_backup.starget->hostdata;
 		sas_target_priv_data->deleted = 1;
-		_scsih_ublock_io_device(ioc, sas_device_backup.handle);
-		sas_target_priv_data->handle =
-		     MPT2SAS_INVALID_DEVICE_HANDLE;
 	}
 
 	_scsih_ublock_io_device(ioc, sas_device_backup.handle);
@@ -5416,7 +5288,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 		_scsih_sas_topology_change_event_debug(ioc, event_data);
 #endif
 
-	if (ioc->remove_host || ioc->pci_error_recovery)
+	if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
 		return;
 
 	if (!ioc->sas_hba.num_phys)
@@ -5477,9 +5349,6 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 		switch (reason_code) {
 		case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
 
-			if (ioc->shost_recovery)
-				break;
-
 			if (link_rate == prev_link_rate)
 				break;
 
@@ -5493,9 +5362,6 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 			break;
 		case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
 
-			if (ioc->shost_recovery)
-				break;
-
 			mpt2sas_transport_update_links(ioc, sas_address,
 			    handle, phy_number, link_rate);
 
@@ -5756,7 +5622,7 @@ broadcast_aen_retry:
 	termination_count = 0;
 	query_count = 0;
 	for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
-		if (ioc->shost_recovery)
+		if (ioc->ioc_reset_in_progress_status)
 			goto out;
 		scmd = _scsih_scsi_lookup_get(ioc, smid);
 		if (!scmd)
@@ -5778,7 +5644,7 @@ broadcast_aen_retry:
 		lun = sas_device_priv_data->lun;
 		query_count++;
 
-		if (ioc->shost_recovery)
+		if (ioc->ioc_reset_in_progress_status)
 			goto out;
 
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
@@ -5820,7 +5686,7 @@ broadcast_aen_retry:
 			goto broadcast_aen_retry;
 		}
 
-		if (ioc->shost_recovery)
+		if (ioc->ioc_reset_in_progress_status)
 			goto out_no_lock;
 
 		r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
@@ -5859,7 +5725,7 @@ broadcast_aen_retry:
 	    ioc->name, __func__, query_count, termination_count));
 
 	ioc->broadcast_aen_busy = 0;
-	if (!ioc->shost_recovery)
+	if (!ioc->ioc_reset_in_progress_status)
 		_scsih_ublock_io_all_device(ioc);
 	mutex_unlock(&ioc->tm_cmds.mutex);
 }
@@ -5923,11 +5789,8 @@ _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
 static void
 _scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach)
 {
-	struct MPT2SAS_TARGET *sas_target_priv_data;
+	struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata;
 
-	if (starget == NULL)
-		return;
-	sas_target_priv_data = starget->hostdata;
 	if (no_uld_attach)
 		sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
 	else
@@ -5982,7 +5845,7 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
 	raid_device->handle = handle;
 	raid_device->wwid = wwid;
 	_scsih_raid_device_add(ioc, raid_device);
-	if (!ioc->wait_for_discovery_to_complete) {
+	if (!ioc->wait_for_port_enable_to_complete) {
 		rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
 		    raid_device->id, 0);
 		if (rc)
@@ -6264,10 +6127,6 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
 #endif
-
-	if (ioc->shost_recovery)
-		return;
-
 	foreign_config = (le32_to_cpu(event_data->Flags) &
 	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
 
@@ -6326,9 +6185,6 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
 	int rc;
 	Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
 
-	if (ioc->shost_recovery)
-		return;
-
 	if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
 		return;
 
@@ -6411,9 +6267,6 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
 	Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
 	u64 sas_address;
 
-	if (ioc->shost_recovery)
-		return;
-
 	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
 		return;
 
@@ -6657,10 +6510,10 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 	u32 device_info;
 	u16 slot;
 
-	printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
+	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
 
 	if (list_empty(&ioc->sas_device_list))
-		goto out;
+		return;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
@@ -6679,9 +6532,6 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 		_scsih_mark_responding_sas_device(ioc, sas_address, slot,
 		    handle);
 	}
-out:
-	printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
-	    ioc->name);
 }
 
 /**
@@ -6757,14 +6607,10 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
 	u16 handle;
 	u8 phys_disk_num;
 
-	if (!ioc->ir_firmware)
-		return;
-
-	printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
-	    ioc->name);
+	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
 
 	if (list_empty(&ioc->raid_device_list))
-		goto out;
+		return;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
@@ -6803,9 +6649,6 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
 			set_bit(handle, ioc->pd_handles);
 		}
 	}
-out:
-	printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
-	    "complete\n", ioc->name);
 }
 
 /**
@@ -6865,10 +6708,10 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
 	u64 sas_address;
 	u16 handle;
 
-	printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
+	printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__);
 
 	if (list_empty(&ioc->sas_expander_list))
-		goto out;
+		return;
 
 	handle = 0xFFFF;
 	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
@@ -6887,8 +6730,6 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
 		_scsih_mark_responding_expander(ioc, sas_address, handle);
 	}
 
- out:
-	printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
 }
 
 /**
@@ -6904,8 +6745,6 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 	struct _sas_node *sas_expander;
 	struct _raid_device *raid_device, *raid_device_next;
 
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
-	    ioc->name);
 
 	list_for_each_entry_safe(sas_device, sas_device_next,
 	    &ioc->sas_device_list, list) {
@@ -6925,9 +6764,6 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 		_scsih_remove_device(ioc, sas_device);
 	}
 
-	if (!ioc->ir_firmware)
-		goto retry_expander_search;
-
 	list_for_each_entry_safe(raid_device, raid_device_next,
 	    &ioc->raid_device_list, list) {
 		if (raid_device->responding) {
@@ -6954,170 +6790,52 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 		mpt2sas_expander_remove(ioc, sas_expander->sas_address);
 		goto retry_expander_search;
 	}
-	printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
-	    ioc->name);
-	/* unblock devices */
-	_scsih_ublock_io_all_device(ioc);
-}
-
-static void
-_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
-	struct _sas_node *sas_expander, u16 handle)
-{
-	Mpi2ExpanderPage1_t expander_pg1;
-	Mpi2ConfigReply_t mpi_reply;
-	int i;
-
-	for (i = 0 ; i < sas_expander->num_phys ; i++) {
-		if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
-		    &expander_pg1, i, handle))) {
-			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
-			    ioc->name, __FILE__, __LINE__, __func__);
-			return;
-		}
-
-		mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
-		    le16_to_cpu(expander_pg1.AttachedDevHandle), i,
-		    expander_pg1.NegotiatedLinkRate >> 4);
-	}
 }
 
 /**
- * _scsih_scan_for_devices_after_reset - scan for devices after host reset
+ * _scsih_hide_unhide_sas_devices - add/remove device to/from OS
  * @ioc: per adapter object
  *
  * Return nothing.
  */
 static void
-_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
+_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 {
-	Mpi2ExpanderPage0_t expander_pg0;
-	Mpi2SasDevicePage0_t sas_device_pg0;
-	Mpi2RaidVolPage1_t volume_pg1;
-	Mpi2RaidVolPage0_t volume_pg0;
-	Mpi2RaidPhysDiskPage0_t pd_pg0;
-	Mpi2EventIrConfigElement_t element;
-	Mpi2ConfigReply_t mpi_reply;
-	u8 phys_disk_num;
-	u16 ioc_status;
-	u16 handle, parent_handle;
-	u64 sas_address;
-	struct _sas_device *sas_device;
-	struct _sas_node *expander_device;
-	static struct _raid_device *raid_device;
-
-	printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
-
-	_scsih_sas_host_refresh(ioc);
-
-	/* expanders */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
-	    MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		handle = le16_to_cpu(expander_pg0.DevHandle);
-		expander_device = mpt2sas_scsih_expander_find_by_sas_address(
-		    ioc, le64_to_cpu(expander_pg0.SASAddress));
-		if (expander_device)
-			_scsih_refresh_expander_links(ioc, expander_device,
-			    handle);
-		else
-			_scsih_expander_add(ioc, handle);
-	}
-
-	if (!ioc->ir_firmware)
-		goto skip_to_sas;
+	struct _sas_device *sas_device, *sas_device_next;
 
-	/* phys disk */
-	phys_disk_num = 0xFF;
-	while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
-	    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
-	    phys_disk_num))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		phys_disk_num = pd_pg0.PhysDiskNum;
-		handle = le16_to_cpu(pd_pg0.DevHandle);
-		sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-		if (sas_device)
-			continue;
-		if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
-		    handle) != 0)
-			continue;
-		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-		if (!_scsih_get_sas_address(ioc, parent_handle,
-		    &sas_address)) {
-			mpt2sas_transport_update_links(ioc, sas_address,
-			    handle, sas_device_pg0.PhyNum,
-			    MPI2_SAS_NEG_LINK_RATE_1_5);
-			set_bit(handle, ioc->pd_handles);
-			_scsih_add_device(ioc, handle, 0, 1);
-		}
-	}
+	if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag !=
+	    MFG_PAGE10_HIDE_IF_VOL_PRESENT)
+		return;
 
-	/* volumes */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
-	    &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		handle = le16_to_cpu(volume_pg1.DevHandle);
-		raid_device = _scsih_raid_device_find_by_wwid(ioc,
-		    le64_to_cpu(volume_pg1.WWID));
-		if (raid_device)
-			continue;
-		if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
-		    &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
-		     sizeof(Mpi2RaidVolPage0_t)))
-			continue;
-		if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
-		    volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
-			memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
-			element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
-			element.VolDevHandle = volume_pg1.DevHandle;
-			_scsih_sas_volume_add(ioc, &element);
+	if (ioc->hide_drives) {
+		if (_scsih_get_num_volumes(ioc))
+			return;
+		ioc->hide_drives = 0;
+		list_for_each_entry_safe(sas_device, sas_device_next,
+		    &ioc->sas_device_list, list) {
+			if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+				sas_device->sas_address_parent)) {
+				_scsih_sas_device_remove(ioc, sas_device);
+			} else if (!sas_device->starget) {
+				mpt2sas_transport_port_remove(ioc,
+				    sas_device->sas_address,
+				    sas_device->sas_address_parent);
+				_scsih_sas_device_remove(ioc, sas_device);
+			}
 		}
-	}
-
- skip_to_sas:
-
-	/* sas devices */
-	handle = 0xFFFF;
-	while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
-	    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
-	    handle))) {
-		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
-		    MPI2_IOCSTATUS_MASK;
-		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
-			break;
-		handle = le16_to_cpu(sas_device_pg0.DevHandle);
-		if (!(_scsih_is_end_device(
-		    le32_to_cpu(sas_device_pg0.DeviceInfo))))
-			continue;
-		sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
-		    le64_to_cpu(sas_device_pg0.SASAddress));
-		if (sas_device)
-			continue;
-		parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
-		if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
-			mpt2sas_transport_update_links(ioc, sas_address, handle,
-			    sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
-			_scsih_add_device(ioc, handle, 0, 0);
+	} else {
+		if (!_scsih_get_num_volumes(ioc))
+			return;
+		ioc->hide_drives = 1;
+		list_for_each_entry_safe(sas_device, sas_device_next,
+		    &ioc->sas_device_list, list) {
+			mpt2sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent);
 		}
 	}
-
-	printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
 }
 
-
 /**
  * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
  * @ioc: per adapter object
@@ -7153,6 +6871,7 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 		}
 		_scsih_fw_event_cleanup_queue(ioc);
 		_scsih_flush_running_cmds(ioc);
+		_scsih_queue_rescan(ioc);
 		break;
 	case MPT2_IOC_DONE_RESET:
 		dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
@@ -7162,13 +6881,6 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
 		_scsih_search_responding_sas_devices(ioc);
 		_scsih_search_responding_raid_devices(ioc);
 		_scsih_search_responding_expanders(ioc);
-		if (!ioc->is_driver_loading) {
-			_scsih_prep_device_scan(ioc);
-			_scsih_search_responding_sas_devices(ioc);
-			_scsih_search_responding_raid_devices(ioc);
-			_scsih_search_responding_expanders(ioc);
-			_scsih_error_recovery_delete_devices(ioc);
-		}
 		break;
 	}
 }
@@ -7186,6 +6898,7 @@ _firmware_event_work(struct work_struct *work)
 {
 	struct fw_event_work *fw_event = container_of(work,
 	    struct fw_event_work, delayed_work.work);
+	unsigned long flags;
 	struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
 
 	/* the queue is being flushed so ignore this event */
@@ -7195,21 +6908,23 @@ _firmware_event_work(struct work_struct *work)
 		return;
 	}
 
-	switch (fw_event->event) {
-	case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
-		while (scsi_host_in_recovery(ioc->shost))
-			ssleep(1);
+	if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
+		_scsih_fw_event_free(ioc, fw_event);
+		spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+		if (ioc->shost_recovery) {
+			init_completion(&ioc->shost_recovery_done);
+			spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
+			    flags);
+			wait_for_completion(&ioc->shost_recovery_done);
+		} else
+			spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock,
+			    flags);
 		_scsih_remove_unresponding_sas_devices(ioc);
-		_scsih_scan_for_devices_after_reset(ioc);
-		break;
-	case MPT2SAS_PORT_ENABLE_COMPLETE:
-		ioc->start_scan = 0;
-
-
+		_scsih_hide_unhide_sas_devices(ioc);
+		return;
+	}
 
-		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
-		    "from worker thread\n", ioc->name));
-		break;
+	switch (fw_event->event) {
 	case MPT2SAS_TURN_ON_FAULT_LED:
 		_scsih_turn_on_fault_led(ioc, fw_event->device_handle);
 		break;
@@ -7406,8 +7121,6 @@ static struct scsi_host_template scsih_driver_template = {
 	.slave_configure		= _scsih_slave_configure,
 	.target_destroy			= _scsih_target_destroy,
 	.slave_destroy			= _scsih_slave_destroy,
-	.scan_finished			= _scsih_scan_finished,
-	.scan_start			= _scsih_scan_start,
 	.change_queue_depth 		= _scsih_change_queue_depth,
 	.change_queue_type		= _scsih_change_queue_type,
 	.eh_abort_handler		= _scsih_abort,
@@ -7668,12 +7381,7 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
 	unsigned long flags;
 	int rc;
 
-	 /* no Bios, return immediately */
-	if (!ioc->bios_pg3.BiosVersion)
-		return;
-
 	device = NULL;
-	is_raid = 0;
 	if (ioc->req_boot_device.device) {
 		device =  ioc->req_boot_device.device;
 		is_raid = ioc->req_boot_device.is_raid;
@@ -7709,9 +7417,8 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
 		    sas_device->sas_address_parent)) {
 			_scsih_sas_device_remove(ioc, sas_device);
 		} else if (!sas_device->starget) {
-			if (!ioc->is_driver_loading)
-				mpt2sas_transport_port_remove(ioc, sas_address,
-					sas_address_parent);
+			mpt2sas_transport_port_remove(ioc, sas_address,
+			    sas_address_parent);
 			_scsih_sas_device_remove(ioc, sas_device);
 		}
 	}
@@ -7755,28 +7462,22 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
 	/* SAS Device List */
 	list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
 	    list) {
+		spin_lock_irqsave(&ioc->sas_device_lock, flags);
+		list_move_tail(&sas_device->list, &ioc->sas_device_list);
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 		if (ioc->hide_drives)
 			continue;
 
 		if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
 		    sas_device->sas_address_parent)) {
-			list_del(&sas_device->list);
-			kfree(sas_device);
-			continue;
+			_scsih_sas_device_remove(ioc, sas_device);
 		} else if (!sas_device->starget) {
-			if (!ioc->is_driver_loading)
-				mpt2sas_transport_port_remove(ioc,
-					sas_device->sas_address,
-					sas_device->sas_address_parent);
-			list_del(&sas_device->list);
-			kfree(sas_device);
-			continue;
-
+			mpt2sas_transport_port_remove(ioc,
+			    sas_device->sas_address,
+			    sas_device->sas_address_parent);
+			_scsih_sas_device_remove(ioc, sas_device);
 		}
-		spin_lock_irqsave(&ioc->sas_device_lock, flags);
-		list_move_tail(&sas_device->list, &ioc->sas_device_list);
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 	}
 }
 
@@ -7789,7 +7490,9 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
 static void
 _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
 {
-	u16 volume_mapping_flags;
+	u16 volume_mapping_flags =
+	    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
+	    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
 
 	if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
 		return;  /* return when IOC doesn't support initiator mode */
@@ -7797,93 +7500,18 @@ _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
 	_scsih_probe_boot_devices(ioc);
 
 	if (ioc->ir_firmware) {
-		volume_mapping_flags =
-		    le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
-		    MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
-		if (volume_mapping_flags ==
-		    MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
-			_scsih_probe_raid(ioc);
+		if ((volume_mapping_flags &
+		     MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) {
 			_scsih_probe_sas(ioc);
+			_scsih_probe_raid(ioc);
 		} else {
-			_scsih_probe_sas(ioc);
 			_scsih_probe_raid(ioc);
+			_scsih_probe_sas(ioc);
 		}
 	} else
 		_scsih_probe_sas(ioc);
 }
 
-
-/**
- * _scsih_scan_start - scsi lld callback for .scan_start
- * @shost: SCSI host pointer
- *
- * The shost has the ability to discover targets on its own instead
- * of scanning the entire bus.  In our implemention, we will kick off
- * firmware discovery.
- */
-static void
-_scsih_scan_start(struct Scsi_Host *shost)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	int rc;
-
-	if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
-		mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
-
-	ioc->start_scan = 1;
-	rc = mpt2sas_port_enable(ioc);
-
-	if (rc != 0)
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
-}
-
-/**
- * _scsih_scan_finished - scsi lld callback for .scan_finished
- * @shost: SCSI host pointer
- * @time: elapsed time of the scan in jiffies
- *
- * This function will be called periodically until it returns 1 with the
- * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
- * we wait for firmware discovery to complete, then return 1.
- */
-static int
-_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
-	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-
-	if (time >= (300 * HZ)) {
-		ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
-		    "(timeout=300s)\n", ioc->name);
-		ioc->is_driver_loading = 0;
-		return 1;
-	}
-
-	if (ioc->start_scan)
-		return 0;
-
-	if (ioc->start_scan_failed) {
-		printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
-		    "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
-		ioc->is_driver_loading = 0;
-		ioc->wait_for_discovery_to_complete = 0;
-		ioc->remove_host = 1;
-		return 1;
-	}
-
-	printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
-	ioc->base_cmds.status = MPT2_CMD_NOT_USED;
-
-	if (ioc->wait_for_discovery_to_complete) {
-		ioc->wait_for_discovery_to_complete = 0;
-		_scsih_probe_devices(ioc);
-	}
-	mpt2sas_base_start_watchdog(ioc);
-	ioc->is_driver_loading = 0;
-	return 1;
-}
-
-
 /**
  * _scsih_probe - attach and add scsi host
  * @pdev: PCI device struct
@@ -7920,7 +7548,6 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->tm_cb_idx = tm_cb_idx;
 	ioc->ctl_cb_idx = ctl_cb_idx;
 	ioc->base_cb_idx = base_cb_idx;
-	ioc->port_enable_cb_idx = port_enable_cb_idx;
 	ioc->transport_cb_idx = transport_cb_idx;
 	ioc->scsih_cb_idx = scsih_cb_idx;
 	ioc->config_cb_idx = config_cb_idx;
@@ -7993,14 +7620,14 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_thread_fail;
 	}
 
-	ioc->is_driver_loading = 1;
+	ioc->wait_for_port_enable_to_complete = 1;
 	if ((mpt2sas_base_attach(ioc))) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 		    ioc->name, __FILE__, __LINE__, __func__);
 		goto out_attach_fail;
 	}
 
-	scsi_scan_host(shost);
+	ioc->wait_for_port_enable_to_complete = 0;
 	if (ioc->is_warpdrive) {
 		if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
 			ioc->hide_drives = 0;
@@ -8023,7 +7650,6 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
  out_thread_fail:
 	list_del(&ioc->list);
 	scsi_remove_host(shost);
-	scsi_host_put(shost);
  out_add_shost_fail:
 	return -ENODEV;
 }
@@ -8270,8 +7896,6 @@ _scsih_init(void)
 
 	/* base internal commands callback handler */
 	base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
-	port_enable_cb_idx = mpt2sas_base_register_callback_handler(
-		mpt2sas_port_enable_done);
 
 	/* transport internal commands callback handler */
 	transport_cb_idx = mpt2sas_base_register_callback_handler(
@@ -8326,7 +7950,6 @@ _scsih_exit(void)
 	mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
 	mpt2sas_base_release_callback_handler(tm_cb_idx);
 	mpt2sas_base_release_callback_handler(base_cb_idx);
-	mpt2sas_base_release_callback_handler(port_enable_cb_idx);
 	mpt2sas_base_release_callback_handler(transport_cb_idx);
 	mpt2sas_base_release_callback_handler(scsih_cb_idx);
 	mpt2sas_base_release_callback_handler(config_cb_idx);