linux-kernel - Re: [PATCH][NET] several cleanups and bugfixes for fec.c: preserve MII/RMII setting in fec

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20111207111538.GJ5550@S2100-06.ap.freescale.net>
Date:	Wed, 7 Dec 2011 19:15:39 +0800
From:	Shawn Guo <shawn.guo@...escale.com>
To:	Lothar Waßmann <LW@...O-electronics.de>
CC:	<netdev@...r.kernel.org>, Shawn Guo <shawn.guo@...aro.org>,
	<linux-kernel@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH][NET] several cleanups and bugfixes for fec.c: preserve
 MII/RMII setting in fec_stop()

On Wed, Dec 07, 2011 at 11:49:09AM +0100, Lothar Waßmann wrote:
> Hi,
> 
> Shawn Guo writes:
> > On Wed, Dec 07, 2011 at 11:42:28AM +0100, Lothar Waßmann wrote:
> > > Hi,
> > > 
> > > Shawn Guo writes:
> > > > On Tue, Dec 06, 2011 at 11:27:14AM +0100, Lothar Waßmann wrote:
> > > > > Additionally to setting the ETHER_EN bit in FEC_ECNTRL the MII/RMII
> > > > > setting in FEC_R_CNTRL needs to be preserved to keep the MII interface
> > > > 
> > > > s/MII/RMII?  From what I see from imx28 and imx6q RM, the reset state
> > > > for this setting is MII mode.
> > > > 
> > > > > functional.
> > > > > 
> > > > > Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
> > > > > ---
> > > > >  drivers/net/ethernet/freescale/fec.c |    5 ++++-
> > > > >  1 files changed, 4 insertions(+), 1 deletions(-)
> > > > 
> > > > I assume this is fixing a problem you are seeing on imx28 only.
> > > > Do you see the problem on imx53/51?
> > > > 
> > > No. i.MX53 uses the RMII gasket which is not affected by resetting the
> > > controller. And imMX51 does not support RMII at all.
> > > 
> > > > > 
> > > > > diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
> > > > > index 11534b9..ab0afb5 100644
> > > > > --- a/drivers/net/ethernet/freescale/fec.c
> > > > > +++ b/drivers/net/ethernet/freescale/fec.c
> > > > > @@ -515,6 +515,7 @@ fec_stop(struct net_device *ndev)
> > > > >  	struct fec_enet_private *fep = netdev_priv(ndev);
> > > > >  	const struct platform_device_id *id_entry =
> > > > >  				platform_get_device_id(fep->pdev);
> > > > > +	u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
> > > > 
> > > > This bit is only available on ENET (imx28 and imx6q).  Do we want to
> > > > do the same thing for FEC (imx25/27/35/51/53)?
> > > > 
> > > No. AFAICT that's not necessary there.
> > > 
> > So you need to check it's actually running on ENET before accessing
> > the bit.
> > 
> That's done in the place where the register is being written:
> |	if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
> |		writel(2, fep->hwp + FEC_ECNTRL);
> |		writel(rmii_mode, fep->hwp + FEC_R_CNTRL);
> |	}
> 
> We could save one register read by doing the check also for the read,
> but that would further complicate the code.
> 
Ok.  Will have a test and then get back to you.

-- 
Regards,
Shawn

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/