linux-kernel - Re: [regression] Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4EDF7153.7090306@bitmer.com>
Date:	Wed, 07 Dec 2011 15:59:47 +0200
From:	Jarkko Nikula <jarkko.nikula@...mer.com>
To:	balbi@...com
CC:	Felipe Contreras <felipe.contreras@...il.com>,
	Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Tony Lindgren <tony@...mide.com>,
	Thomas Gleixner <tglx@...utronix.de>
Subject: Re: [regression] Re: [PATCH 3/7] mfd: twl4030-irq: drop the kthread

On 12/07/2011 03:39 PM, Felipe Balbi wrote:
>> I'll try to flash a system to NAND, since I can't seem to just get the
>> MMC to work when the cover is open and the device is connected to the
>> jig to see if I can see something from serial console.
>>
>> You don't have any idea about what to try?
>
> you could cut the back cover so that it just fits the device on the jig
> (I did that to an old cover), then it works just fine :-)
>
You could also go without breaking the back cover by putting a magnet on 
top the hal sensor (like tape a piece from a fridge magnet). See here 
the place:

http://talk.maemo.org/showthread.php?p=1008775

Another option is to to set .gpio_cd = -EINVAL for external mmc in 
arch/arm/mach-omap2/board-rx51-peripherals.c.

-- 
Jarkko
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/