| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACxGe6tvP+51RPfsU0Jr6nExyD6KXr75e4Rxo1DiaJxYJXN-eA@mail.gmail.com>
Date: Wed, 7 Dec 2011 08:02:42 -0700
From: Grant Likely <grant.likely@...retlab.ca>
To: Rob Herring <robherring2@...il.com>
Cc: Michal Simek <monstr@...str.eu>, John Linn <John.Linn@...inx.com>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Rob Herring <rob.herring@...xeda.com>,
Ingo Molnar <mingo@...e.hu>, Jeff Garzik <jgarzik@...hat.com>,
Stephen Rothwell <sfr@...b.auug.org.au>,
devicetree-discuss@...ts.ozlabs.org,
LKML <linux-kernel@...r.kernel.org>,
Randy Dunlap <rdunlap@...otime.net>,
Andrew Morton <akpm@...ux-foundation.org>,
Alan Cox <alan@...rguk.ukuu.org.uk>,
Anton Vorontsov <anton.vorontsov@...aro.org>
Subject: Re: [RFC PATCH] microblaze/irq: Change NO_IRQ to 0
On Wed, Dec 7, 2011 at 7:41 AM, Rob Herring <robherring2@...il.com> wrote:
> From: Grant Likely <grant.likely@...retlab.ca>
>
> As has been discussed many times[1], Using NO_IRQ set to anything other
> than 0 is bug waiting to happen since many drivers follow the pattern
> "if (!irq)" for testing whether or not an irq has been set.
>
> This patch changes the Microblaze NO_IRQ setting from -1 to 0 to bring
> it in line with most of the rest of the kernel. It also prepares for
> Microblaze eventually supporting multiple interrupt controllers by
> breaking the assumption that hwirq# == Linux IRQ#. The Linux IRQ
> number is just a cookie with no guarantee of a direct relationship
> with the hardware irq arrangement.
>
> At this point, Microblaze interrupt handling only supports only one
> instance of one kind of interrupt controller (xilinx_intc). This change
> shouldn't affect any architecture code outside of the interrupt
> controller driver and the irq_of mapping.
>
> Updated to 3.2 and to use irq_data.hwirq by Rob Herring.
>
> Completely untested.
>
> [1] http://lkml.org/lkml/2005/11/21/221
>
> Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
> Signed-off-by: Rob Herring <rob.herring@...xeda.com>
Brilliant! Thanks for updating this Rob.
g.
> ---
>
> The main complaint with the prior version was Michal's complaint about the
> +1 / -1 conversion in every function. This is now solved with the use of
> irq_data.hwirq to store the h/w irq numbers.
>
> I also fixed some errors around nr_irq.
>
> Rob
>
> arch/microblaze/include/asm/irq.h | 4 ++--
> arch/microblaze/kernel/intc.c | 18 ++++++++++--------
> arch/microblaze/kernel/irq.c | 10 ++++++----
> 3 files changed, 18 insertions(+), 14 deletions(-)
>
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index cc54187..b07c179 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -9,7 +9,7 @@
> #ifndef _ASM_MICROBLAZE_IRQ_H
> #define _ASM_MICROBLAZE_IRQ_H
>
> -#define NR_IRQS 32
> +#define NR_IRQS (32 + 1) /* Add 1 to skip over IRQ0 */
> #include <asm-generic/irq.h>
>
> /* This type is the placeholder for a hardware interrupt number. It has to
> @@ -20,7 +20,7 @@ typedef unsigned long irq_hw_number_t;
>
> extern unsigned int nr_irq;
>
> -#define NO_IRQ (-1)
> +#define NO_IRQ 0
>
> struct pt_regs;
> extern void do_IRQ(struct pt_regs *regs);
> diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
> index eb41441..ed65aac 100644
> --- a/arch/microblaze/kernel/intc.c
> +++ b/arch/microblaze/kernel/intc.c
> @@ -42,7 +42,7 @@ unsigned int nr_irq;
>
> static void intc_enable_or_unmask(struct irq_data *d)
> {
> - unsigned long mask = 1 << d->irq;
> + unsigned long mask = 1 << d->hwirq;
> pr_debug("enable_or_unmask: %d\n", d->irq);
> out_be32(INTC_BASE + SIE, mask);
>
> @@ -57,18 +57,18 @@ static void intc_enable_or_unmask(struct irq_data *d)
> static void intc_disable_or_mask(struct irq_data *d)
> {
> pr_debug("disable: %d\n", d->irq);
> - out_be32(INTC_BASE + CIE, 1 << d->irq);
> + out_be32(INTC_BASE + CIE, 1 << d->hwirq);
> }
>
> static void intc_ack(struct irq_data *d)
> {
> pr_debug("ack: %d\n", d->irq);
> - out_be32(INTC_BASE + IAR, 1 << d->irq);
> + out_be32(INTC_BASE + IAR, 1 << d->hwirq);
> }
>
> static void intc_mask_ack(struct irq_data *d)
> {
> - unsigned long mask = 1 << d->irq;
> + unsigned long mask = 1 << d->hwirq;
> pr_debug("disable_and_ack: %d\n", d->irq);
> out_be32(INTC_BASE + CIE, mask);
> out_be32(INTC_BASE + IAR, mask);
> @@ -90,8 +90,11 @@ unsigned int get_irq(struct pt_regs *regs)
> * NOTE: This function is the one that needs to be improved in
> * order to handle multiple interrupt controllers. It currently
> * is hardcoded to check for interrupts only on the first INTC.
> + *
> + * Linux IRQ# is currently offset by one to map to the hardware
> + * irq number. So hardware IRQ0 maps to Linux irq 1.
> */
> - irq = in_be32(INTC_BASE + IVR);
> + irq = in_be32(INTC_BASE + IVR) + 1;
> pr_debug("get_irq: %d\n", irq);
>
> return irq;
> @@ -134,8 +137,6 @@ void __init init_IRQ(void)
> intr_type =
> be32_to_cpup(of_get_property(intc,
> "xlnx,kind-of-intr", NULL));
> - if (intr_type > (u32)((1ULL << nr_irq) - 1))
> - printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
>
> #ifdef CONFIG_SELFMOD_INTC
> selfmod_function((int *) arr_func, intc_baseaddr);
> @@ -155,7 +156,7 @@ void __init init_IRQ(void)
> /* Turn on the Master Enable. */
> out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
>
> - for (i = 0; i < nr_irq; ++i) {
> + for (i = 1; i < nr_irq; ++i) {
> if (intr_type & (0x00000001 << i)) {
> irq_set_chip_and_handler_name(i, &intc_dev,
> handle_edge_irq, "edge");
> @@ -165,5 +166,6 @@ void __init init_IRQ(void)
> handle_level_irq, "level");
> irq_set_status_flags(i, IRQ_LEVEL);
> }
> + irq_get_irq_data(i)->hwirq = i - 1;
> }
> }
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index e5d63a8..ac1b463 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -33,11 +33,11 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
> irq_enter();
> irq = get_irq(regs);
> next_irq:
> - BUG_ON(irq == -1U);
> + BUG_ON(!irq);
> generic_handle_irq(irq);
>
> irq = get_irq(regs);
> - if (irq != -1U) {
> + if (irq) {
> pr_debug("next irq: %d\n", irq);
> ++concurrent_irq;
> goto next_irq;
> @@ -52,13 +52,15 @@ next_irq:
> intc without any cascades or any connection that's why mapping is 1:1 */
> unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
> {
> - return hwirq;
> + return hwirq + 1;
> }
> EXPORT_SYMBOL_GPL(irq_create_mapping);
>
> unsigned int irq_create_of_mapping(struct device_node *controller,
> const u32 *intspec, unsigned int intsize)
> {
> - return intspec[0];
> + /* Hardware irq is mapped to Linux IRQ# by a 1 offset. Linux irq
> + * 0 means no IRQ. */
> + return intspec[0] + 1;
> }
> EXPORT_SYMBOL_GPL(irq_create_of_mapping);
> --
> 1.7.5.4
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists