| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20111207161217.902679888@clark.kroah.org>
Date: Wed, 07 Dec 2011 08:11:40 -0800
From: Greg KH <gregkh@...e.de>
To: <linux-kernel@...r.kernel.org>, <stable@...r.kernel.org>
Cc: <torvalds@...ux-foundation.org>, <akpm@...ux-foundation.org>,
<alan@...rguk.ukuu.org.uk>, Yong Zhang <yong.zhang0@...il.com>,
David Daney <ddaney.cavm@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
Chen Jie <chenj@...ote.com>, zhangfx <zhangfx@...ote.com>,
John Stultz <john.stultz@...aro.org>
Subject: [038/104] clocksource: Avoid selecting mult values that might overflow when adjusted
3.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <john.stultz@...aro.org>
commit d65670a78cdbfae94f20a9e05ec705871d7cdf2b upstream.
For some frequencies, the clocks_calc_mult_shift() function will
unfortunately select mult values very close to 0xffffffff. This
has the potential to overflow when NTP adjusts the clock, adding
to the mult value.
This patch adds a clocksource.maxadj value, which provides
an approximation of an 11% adjustment(NTP limits adjustments to
500ppm and the tick adjustment is limited to 10%), which could
be made to the clocksource.mult value. This is then used to both
check that the current mult value won't overflow/underflow, as
well as warning us if the timekeeping_adjust() code pushes over
that 11% boundary.
v2: Fix max_adjustment calculation, and improve WARN_ONCE
messages.
v3: Don't warn before maxadj has actually been set
CC: Yong Zhang <yong.zhang0@...il.com>
CC: David Daney <ddaney.cavm@...il.com>
CC: Thomas Gleixner <tglx@...utronix.de>
CC: Chen Jie <chenj@...ote.com>
CC: zhangfx <zhangfx@...ote.com>
Reported-by: Chen Jie <chenj@...ote.com>
Reported-by: zhangfx <zhangfx@...ote.com>
Tested-by: Yong Zhang <yong.zhang0@...il.com>
Signed-off-by: John Stultz <john.stultz@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
include/linux/clocksource.h | 3 +-
kernel/time/clocksource.c | 58 ++++++++++++++++++++++++++++++++++++--------
kernel/time/timekeeping.c | 7 +++++
3 files changed, 57 insertions(+), 11 deletions(-)
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct t
* @mult: cycle to nanosecond multiplier
* @shift: cycle to nanosecond divisor (power of two)
* @max_idle_ns: max idle time permitted by the clocksource (nsecs)
+ * @maxadj maximum adjustment value to mult (~11%)
* @flags: flags describing special properties
* @archdata: arch-specific data
* @suspend: suspend function for the clocksource, if necessary
@@ -172,7 +173,7 @@ struct clocksource {
u32 mult;
u32 shift;
u64 max_idle_ns;
-
+ u32 maxadj;
#ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
struct arch_clocksource_data archdata;
#endif
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -494,6 +494,22 @@ void clocksource_touch_watchdog(void)
}
/**
+ * clocksource_max_adjustment- Returns max adjustment amount
+ * @cs: Pointer to clocksource
+ *
+ */
+static u32 clocksource_max_adjustment(struct clocksource *cs)
+{
+ u64 ret;
+ /*
+ * We won't try to correct for more then 11% adjustments (110,000 ppm),
+ */
+ ret = (u64)cs->mult * 11;
+ do_div(ret,100);
+ return (u32)ret;
+}
+
+/**
* clocksource_max_deferment - Returns max time the clocksource can be deferred
* @cs: Pointer to clocksource
*
@@ -505,25 +521,28 @@ static u64 clocksource_max_deferment(str
/*
* Calculate the maximum number of cycles that we can pass to the
* cyc2ns function without overflowing a 64-bit signed result. The
- * maximum number of cycles is equal to ULLONG_MAX/cs->mult which
- * is equivalent to the below.
- * max_cycles < (2^63)/cs->mult
- * max_cycles < 2^(log2((2^63)/cs->mult))
- * max_cycles < 2^(log2(2^63) - log2(cs->mult))
- * max_cycles < 2^(63 - log2(cs->mult))
- * max_cycles < 1 << (63 - log2(cs->mult))
+ * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
+ * which is equivalent to the below.
+ * max_cycles < (2^63)/(cs->mult + cs->maxadj)
+ * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
+ * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
+ * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
+ * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
* Please note that we add 1 to the result of the log2 to account for
* any rounding errors, ensure the above inequality is satisfied and
* no overflow will occur.
*/
- max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
+ max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
/*
* The actual maximum number of cycles we can defer the clocksource is
* determined by the minimum of max_cycles and cs->mask.
+ * Note: Here we subtract the maxadj to make sure we don't sleep for
+ * too long if there's a large negative adjustment.
*/
max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
- max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
+ max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
+ cs->shift);
/*
* To ensure that the clocksource does not wrap whilst we are idle,
@@ -642,7 +661,6 @@ static void clocksource_enqueue(struct c
void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
{
u64 sec;
-
/*
* Calc the maximum number of seconds which we can run before
* wrapping around. For clocksources which have a mask > 32bit
@@ -663,6 +681,20 @@ void __clocksource_updatefreq_scale(stru
clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
NSEC_PER_SEC / scale, sec * scale);
+
+ /*
+ * for clocksources that have large mults, to avoid overflow.
+ * Since mult may be adjusted by ntp, add an safety extra margin
+ *
+ */
+ cs->maxadj = clocksource_max_adjustment(cs);
+ while ((cs->mult + cs->maxadj < cs->mult)
+ || (cs->mult - cs->maxadj > cs->mult)) {
+ cs->mult >>= 1;
+ cs->shift--;
+ cs->maxadj = clocksource_max_adjustment(cs);
+ }
+
cs->max_idle_ns = clocksource_max_deferment(cs);
}
EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
@@ -703,6 +735,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register
*/
int clocksource_register(struct clocksource *cs)
{
+ /* calculate max adjustment for given mult/shift */
+ cs->maxadj = clocksource_max_adjustment(cs);
+ WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
+ "Clocksource %s might overflow on 11%% adjustment\n",
+ cs->name);
+
/* calculate max idle time permitted for this clocksource */
cs->max_idle_ns = clocksource_max_deferment(cs);
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -824,6 +824,13 @@ static void timekeeping_adjust(s64 offse
} else
return;
+ WARN_ONCE(timekeeper.clock->maxadj &&
+ (timekeeper.mult + adj > timekeeper.clock->mult +
+ timekeeper.clock->maxadj),
+ "Adjusting %s more then 11%% (%ld vs %ld)\n",
+ timekeeper.clock->name, (long)timekeeper.mult + adj,
+ (long)timekeeper.clock->mult +
+ timekeeper.clock->maxadj);
timekeeper.mult += adj;
timekeeper.xtime_interval += interval;
timekeeper.xtime_nsec -= offset;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists