linux-kernel - Re: [PATCH] drivers/net/usb/asix: resync from vendor's copy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4EDF9293.8070809@teksavvy.com>
Date:	Wed, 07 Dec 2011 11:21:39 -0500
From:	Mark Lord <kernel@...savvy.com>
To:	Ben Hutchings <bhutchings@...arflare.com>
CC:	David Miller <davem@...emloft.net>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] drivers/net/usb/asix:  resync from vendor's copy

On 11-12-06 12:45 PM, Ben Hutchings wrote:
> On Tue, 2011-12-06 at 07:44 -0500, Mark Lord wrote:
>> On 11-12-05 10:18 AM, Ben Hutchings wrote:
>>> On Mon, 2011-12-05 at 09:41 -0500, Mark Lord wrote:
..
>>> If this hardware recognises specific protocols and works out the offsets
>>> itself, then you must claim NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM instead.
>>
>> Yeah, the hardware seems to understand quite a few protocol formats.
>> Okay, so I'll claim the protocol-specific flags in net->hw_features.
>>
>> But what do I use in net->features?
>> The exact same protocol flags,
>> or the generic NETIF_F_HW_CSUM | NETIF_F_RXCSUM ones?
> 
> You set the flags for features that are actually being implemented!
> 
> But do set NETIF_F_RXCSUM in both places.  The network stack doesn't
> know or care exactly what protocols you can do RX checksum validation
> for, so there is only one flag for this.  Only the TX checksum
> generation features have to be distinguished.
> 
>> The set_features() function also has to test for flags
>> to know what to do.  Should it test specific protocol flags,
>> or just the generic two ?
> 
> Think it through.
..

Heh.. my thinking side says to use the exact same protocol-specific flags
in both "hw_features" and "features", and therefore check for those flags
inside the "set_features()" function.

But that's not what earlier versions of this driver did,
and nor what the vendor's driver does.
Those versions all mix the protocol-specific and generic flags.

thus my confusion.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/