linux-kernel - Re: [PATCH 4/7] amp/omap: add a remoteproc driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAK=WgbZvH3eiouryKDenC_x0LdDcHFuumhfoeY4ueiwT5r0cxA@mail.gmail.com>
Date:	Thu, 8 Dec 2011 09:57:43 +0200
From:	Ohad Ben-Cohen <ohad@...ery.com>
To:	linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	Tony Lindgren <tony@...mide.com>
Cc:	akpm@...ux-foundation.org, Brian Swetland <swetland@...gle.com>,
	Arnd Bergmann <arnd@...db.de>,
	Grant Likely <grant.likely@...retlab.ca>,
	Rusty Russell <rusty@...tcorp.com.au>,
	Russell King <linux@....linux.org.uk>,
	Greg KH <greg@...ah.com>, Stephen Boyd <sboyd@...eaurora.org>
Subject: Re: [PATCH 4/7] amp/omap: add a remoteproc driver

Hi Tony,

On Tue, Oct 25, 2011 at 11:48 AM, Ohad Ben-Cohen <ohad@...ery.com> wrote:
> Add a remoteproc driver for OMAP4, so we can boot the dual-M3 "Ducati"
> and DSP subsystems.
>
> Use the omap_device_* API to control the hardware state, and utilize
> the OMAP mailbox to interrupt the remote processor when a new message
> is pending (the mailbox payload is used to tell it which virtqueue was
> the message placed in).
>
> Conversely, when an inbound mailbox message arrives, tell the remoteproc
> core which virtqueue is triggered.
>
> Later we will also use the mailbox payload to signal omap-specific
> events like remote crashes (which will be used to trigger remoteproc
> recovery) and power management transitions. At that point we will also
> extend the remoteproc core to support this.
>
> Based on (but now quite far from) work done by Fernando Guzman Lugo
> <fernando.lugo@...com> and Hari Kanigeri <h-kanigeri2@...com>.
>
> Designed with Brian Swetland <swetland@...gle.com>.
>
> Signed-off-by: Ohad Ben-Cohen <ohad@...ery.com>
> Cc: Brian Swetland <swetland@...gle.com>
> Cc: Arnd Bergmann <arnd@...db.de>
> Cc: Grant Likely <grant.likely@...retlab.ca>
> Cc: Tony Lindgren <tony@...mide.com>
> Cc: Russell King <linux@....linux.org.uk>
> Cc: Rusty Russell <rusty@...tcorp.com.au>
> Cc: Andrew Morton <akpm@...ux-foundation.org>
> Cc: Greg KH <greg@...ah.com>
> Cc: Stephen Boyd <sboyd@...eaurora.org>
> ---
>  arch/arm/plat-omap/include/plat/remoteproc.h |   56 ++++++
>  drivers/amp/remoteproc/Kconfig               |   21 +++
>  drivers/amp/remoteproc/Makefile              |    4 +-
>  drivers/amp/remoteproc/omap_remoteproc.c     |  248 ++++++++++++++++++++++++++
>  drivers/amp/remoteproc/omap_remoteproc.h     |   69 +++++++
>  5 files changed, 397 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/plat-omap/include/plat/remoteproc.h
>  create mode 100644 drivers/amp/remoteproc/omap_remoteproc.c
>  create mode 100644 drivers/amp/remoteproc/omap_remoteproc.h

I'm about to add this to linux-next (minus the 'amp' wording); can I
please have your Acked-by for this (at least for the plat-omap change) ?

Thanks,
Ohad.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/