[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1323789196-4942-2-git-send-email-amit.kachhap@linaro.org>
Date: Tue, 13 Dec 2011 20:43:15 +0530
From: Amit Daniel Kachhap <amit.kachhap@...aro.org>
To: linux-pm@...ts.linux-foundation.org
Cc: linux-kernel@...r.kernel.org, mjg59@...f.ucam.org,
linux-acpi@...r.kernel.org, lenb@...nel.org, rui.zhang@...el.com,
linaro-dev@...ts.linaro.org, amit.kachhap@...aro.org,
patches@...aro.org
Subject: [RFC PATCH 1/2] thermal: Add a new trip type to use cooling device instance number
This patch adds a new trip type THERMAL_TRIP_STATE_ACTIVE. This
trip behaves same as THERMAL_TRIP_ACTIVE but also passes the cooling
device instance number. This helps the cooling device registered as
different instances to perform appropriate cooling action decision in
the set_cur_state call back function.
Also since the trip temperature's are in ascending order so some logic
is put in place to skip the un-necessary checks.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@...aro.org>
---
Documentation/thermal/sysfs-api.txt | 4 ++--
drivers/thermal/thermal_sys.c | 27 ++++++++++++++++++++++++++-
include/linux/thermal.h | 1 +
3 files changed, 29 insertions(+), 3 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index b61e46f..5c1d44e 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -184,8 +184,8 @@ trip_point_[0-*]_temp
trip_point_[0-*]_type
Strings which indicate the type of the trip point.
- E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
- thermal zone.
+ E.g. it can be one of critical, hot, passive, active[0-1],
+ state-active[0-*] for ACPI thermal zone.
RO, Optional
cdev[0-*]
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index dd9a574..72b1ab3 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -192,6 +192,8 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
return sprintf(buf, "active\n");
+ case THERMAL_TRIP_STATE_ACTIVE:
+ return sprintf(buf, "state-active\n");
default:
return sprintf(buf, "unknown\n");
}
@@ -1035,7 +1037,7 @@ EXPORT_SYMBOL(thermal_cooling_device_unregister);
void thermal_zone_device_update(struct thermal_zone_device *tz)
{
int count, ret = 0;
- long temp, trip_temp;
+ long temp, trip_temp, max_state, last_trip_change = 0;
enum thermal_trip_type trip_type;
struct thermal_cooling_device_instance *instance;
struct thermal_cooling_device *cdev;
@@ -1086,6 +1088,29 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
cdev->ops->set_cur_state(cdev, 0);
}
break;
+ case THERMAL_TRIP_STATE_ACTIVE:
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != count)
+ continue;
+
+ if (temp <= last_trip_change)
+ continue;
+
+ cdev = instance->cdev;
+ cdev->ops->get_max_state(cdev, &max_state);
+
+ if ((temp >= trip_temp) &&
+ ((count + 1) <= max_state))
+ cdev->ops->set_cur_state(cdev,
+ count + 1);
+ else if ((temp < trip_temp) &&
+ (count <= max_state))
+ cdev->ops->set_cur_state(cdev, count);
+
+ last_trip_change = trip_temp;
+ }
+ break;
case THERMAL_TRIP_PASSIVE:
if (temp >= trip_temp || tz->passive)
thermal_zone_device_passive(tz, temp,
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 47b4a27..d7d0a27 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -42,6 +42,7 @@ enum thermal_trip_type {
THERMAL_TRIP_PASSIVE,
THERMAL_TRIP_HOT,
THERMAL_TRIP_CRITICAL,
+ THERMAL_TRIP_STATE_ACTIVE,
};
struct thermal_zone_device_ops {
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists