[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20111214154736.GA2419@elte.hu>
Date: Wed, 14 Dec 2011 16:47:36 +0100
From: Ingo Molnar <mingo@...e.hu>
To: "Paul E. McKenney" <paulmck@...ux.vnet.ibm.com>,
Frédéric Weisbecker <fweisbec@...il.com>,
Suresh Siddha <suresh.b.siddha@...el.com>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>
Cc: tglx@...utronix.de, fweisbec@...il.com, josh@...htriplett.org,
keescook@...omium.org, linux-kernel@...r.kernel.org
Subject: Re: [GIT PULL rcu/next] RCU commits for 3.3
* Paul E. McKenney <paulmck@...ux.vnet.ibm.com> wrote:
> Hello, Ingo,
>
> The major features of this series are RCU infrastructure in
> support of Frederic Weisbecker's tickless userspace work and a
> reworked RCU_FAST_NO_HZ that improves energy efficiency on
> large lightly loaded SMP systems by allowing the
> scheduler-clock tick to be turned off more quickly upon entry
> to idle, even when RCU callbacks are queued on the newly idle
> CPU. In addition, RCU_FAST_NO_HZ may now be used on systems
> running TREE_PREEMPT_RCU, where earlier it was restricted to
> TREE_RCU.
>
> In addition, this series provides additional event tracing,
> rcutorture changes that improve automated KVM-based testing of
> RCU, introduces an srcu_read_lock_raw() needed by uprobes, and
> ports a couple of patches from -rt to mainline. Finally, this
> series updates documentation, improves diagnostics, and fixes
> a number of bugs, including a nasty use of RCU from the idle
> task spotted and fixed by Frederic Weisbecker.
>
> These commits have been posted to LKML and updated based on
> feedback:
>
> https://lkml.org/lkml/2011/11/2/363
> https://lkml.org/lkml/2011/11/15/302
> https://lkml.org/lkml/2011/11/28/588
> https://lkml.org/lkml/2011/12/3/77
> https://lkml.org/lkml/2011/12/12/625
>
> They have also been exposed to -next testing.
>
> These changes are based off of 3.2-rc5 and are available at
> the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git rcu/next
>
> Could you please pull them into -tip for additional testing?
>
> Thanx, Paul
>
> ------------------>
> Frederic Weisbecker (11):
> rcu: Detect illegal rcu dereference in extended quiescent state
> rcu: Inform the user about extended quiescent state on PROVE_RCU warning
> rcu: Warn when rcu_read_lock() is used in extended quiescent state
> nohz: Separate out irq exit and idle loop dyntick logic
> nohz: Allow rcu extended quiescent state handling seperately from tick stop
> x86: Enter rcu extended qs after idle notifier call
> x86: Call idle notifier after irq_enter()
> rcu: Fix early call to rcu_idle_enter()
> nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()
> rcu: Don't check irq nesting from rcu idle entry/exit
> rcu: Irq nesting is always 0 on rcu_enter_idle_common
>
> Josh Triplett (1):
> driver-core/cpu: Expose hotpluggability to the rest of the kernel
>
> Kees Cook (1):
> docs: Additional LWN links to RCU API
>
> Paul E. McKenney (49):
> rcu: ->signaled better named ->fqs_state
> rcu: Avoid RCU-preempt expedited grace-period botch
> rcu: Make synchronize_sched_expedited() better at work sharing
> lockdep: Update documentation for lock-class leak detection
> rcu: Track idleness independent of idle tasks
> trace: Allow ftrace_dump() to be called from modules
> rcu: Add failure tracing to rcutorture
> rcu: Document failing tick as cause of RCU CPU stall warning
> rcu: Disable preemption in rcu_is_cpu_idle()
> rcu: Remove one layer of abstraction from PROVE_RCU checking
> rcu: Warn when srcu_read_lock() is used in an extended quiescent state
> rcu: Make srcu_read_lock_held() call common lockdep-enabled function
> powerpc: Tell RCU about idle after hcall tracing
> rcu: Introduce raw SRCU read-side primitives
> rcu: Add documentation for raw SRCU read-side primitives
> rcu: Deconfuse dynticks entry-exit tracing
> rcu: Add more information to the wrong-idle-task complaint
> rcu: Allow dyntick-idle mode for CPUs with callbacks
> rcu: Fix idle-task checks
> rcu: Permit RCU_FAST_NO_HZ to be used by TREE_PREEMPT_RCU
> rcu: Add rcutorture system-shutdown capability
> rcu: Control rcutorture startup from kernel boot parameters
> sched: Add is_idle_task() to handle invalidated uses of idle_cpu()
> rcu: Make RCU use the new is_idle_task() API
> sparc: Make SPARC use the new is_idle_task() API
> kdb: Make KDB use the new is_idle_task() API
> events: Make events use the new is_idle_task() API
> tile: Make tile use the new is_idle_task() API
> rcu: Add rcutorture CPU-hotplug capability
> doc: Add load/store guarantees to Documentation/atomic-ops.txt
> rcu: Update trace_rcu_dyntick() header comment
> rcu: Add tracing for RCU_FAST_NO_HZ
> rcu: Go dyntick-idle more quickly if CPU has serviced current grace period
> rcu: Avoid needlessly IPIing CPUs at GP end
> rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
> rcu: Reduce latency of rcu_prepare_for_idle()
> rcu: Remove dynticks false positives and RCU failures
> rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
> rcu: Document same-context read-side constraints
> rcu: Permit dyntick-idle with callbacks pending
> rcu: Keep invoking callbacks if CPU otherwise idle
> rcu: Adaptive dyntick-idle preparation
> rcu: Remove redundant rcu_cpu_stall_suppress declaration
> rcu: Make rcutorture test for hotpluggability before offlining CPUs
> rcu: Add rcutorture tests for srcu_read_lock_raw()
> rcu: Augment rcu_batch_end tracing for idle and callback state
> Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
> rcu: Apply ACCESS_ONCE() to rcu_boost() return value
> cpu: Export cpu_up()
>
> Thomas Gleixner (2):
> rcu: Omit self-awaken when setting up expedited grace period
> rcu: Remove redundant return from rcu_report_exp_rnp()
>
> Documentation/RCU/checklist.txt | 6 +
> Documentation/RCU/rcu.txt | 10 +-
> Documentation/RCU/stallwarn.txt | 16 +-
> Documentation/RCU/torture.txt | 13 ++
> Documentation/RCU/trace.txt | 4 -
> Documentation/RCU/whatisRCU.txt | 19 ++-
> Documentation/atomic_ops.txt | 87 +++++++++
> Documentation/lockdep-design.txt | 63 +++++++
> arch/arm/kernel/process.c | 6 +-
> arch/avr32/kernel/process.c | 6 +-
> arch/blackfin/kernel/process.c | 6 +-
> arch/microblaze/kernel/process.c | 6 +-
> arch/mips/kernel/process.c | 6 +-
> arch/openrisc/kernel/idle.c | 6 +-
> arch/powerpc/kernel/idle.c | 15 ++-
> arch/powerpc/platforms/iseries/setup.c | 12 +-
> arch/powerpc/platforms/pseries/lpar.c | 4 +
> arch/s390/kernel/process.c | 6 +-
> arch/sh/kernel/idle.c | 6 +-
> arch/sparc/kernel/process_64.c | 6 +-
> arch/sparc/kernel/setup_32.c | 2 +-
> arch/tile/kernel/process.c | 6 +-
> arch/tile/mm/fault.c | 4 +-
> arch/um/kernel/process.c | 6 +-
> arch/unicore32/kernel/process.c | 6 +-
> arch/x86/kernel/apic/apic.c | 6 +-
> arch/x86/kernel/apic/io_apic.c | 2 +-
> arch/x86/kernel/cpu/mcheck/therm_throt.c | 2 +-
> arch/x86/kernel/cpu/mcheck/threshold.c | 2 +-
> arch/x86/kernel/irq.c | 6 +-
> arch/x86/kernel/process_32.c | 6 +-
> arch/x86/kernel/process_64.c | 10 +-
> drivers/base/cpu.c | 7 +
> include/linux/cpu.h | 1 +
> include/linux/hardirq.h | 21 ---
> include/linux/rcupdate.h | 115 ++++++++-----
> include/linux/sched.h | 8 +
> include/linux/srcu.h | 87 ++++++++--
> include/linux/tick.h | 11 +-
> include/trace/events/rcu.h | 122 +++++++++++--
> init/Kconfig | 10 +-
> kernel/cpu.c | 1 +
> kernel/debug/kdb/kdb_support.c | 2 +-
> kernel/events/core.c | 2 +-
> kernel/lockdep.c | 22 +++
> kernel/rcu.h | 7 +
> kernel/rcupdate.c | 12 ++
> kernel/rcutiny.c | 149 +++++++++++++--
> kernel/rcutiny_plugin.h | 29 +++-
> kernel/rcutorture.c | 225 ++++++++++++++++++++++-
> kernel/rcutree.c | 290 +++++++++++++++++++++---------
> kernel/rcutree.h | 26 ++--
> kernel/rcutree_plugin.h | 289 ++++++++++++++++++++++++------
> kernel/rcutree_trace.c | 12 +-
> kernel/rtmutex.c | 8 -
> kernel/softirq.c | 4 +-
> kernel/time/tick-sched.c | 97 ++++++----
> kernel/trace/trace.c | 1 +
> 58 files changed, 1512 insertions(+), 407 deletions(-)
Pulled into tip:core/rcu, thanks a lot Paul!
Note that this commit from Frederic:
69e1e811dcc4: sched, nohz: Track nr_busy_cpus in the sched_group_power
conflicted with this commit from Suresh in sched/core:
69e1e811dcc4: sched, nohz: Track nr_busy_cpus in the sched_group_power
I resolved it by making the set_cpu_sd_state_idle() call
unconditional within the newly decoupled
tick_nohz_stop_sched_tick() function - please double check that
it's the right resolution.
Thanks,
Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists