linux-kernel - RE: [PATCH 1/2] e100: power down PHY if WOL is not enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CEE05A0D7856E14880AD5560634EBEA82AA78720@365EXCH-MBX-P5.nbttech.com>
Date:	Wed, 14 Dec 2011 21:59:47 +0000
From:	Jiang Wang <Jiang.Wang@...erbed.com>
To:	Ben Hutchings <bhutchings@...arflare.com>
CC:	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Bruce Allan <bruce.w.allan@...el.com>,
	Carolyn Wyborny <carolyn.wyborny@...el.com>,
	Don Skidmore <donald.c.skidmore@...el.com>,
	Greg Rose <gregory.v.rose@...el.com>,
	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>,
	Alex Duyck <alexander.h.duyck@...el.com>,
	John Ronciak <john.ronciak@...el.com>,
	"e1000-devel@...ts.sourceforge.net" 
	<e1000-devel@...ts.sourceforge.net>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	Prasanna Panchamukhi <Prasanna.Panchamukhi@...erbed.com>,
	Chaitanya Lala <Chaitanya.Lala@...erbed.com>,
	"Francis St. Amant" <Francis.St.Amant@...erbed.com>,
	"miles.ito@...el.com" <miles.ito@...el.com>
Subject: RE: [PATCH 1/2] e100: power down PHY if WOL is not enabled

Hi Ben,

Do you mean the WOL is enabled but PHY is powered off somehow? That scenario should never happen. If WOL is enabled, there is no code to power off PHY.

Regards,

Jiang

-------------------------------------
Jiang Wang
Member of Technical Staff
Riverbed Technology
Tel: (408) 522-5109
Email: Jiang.Wang@...erbed.com
www.riverbed.com

-----Original Message-----
From: Ben Hutchings [mailto:bhutchings@...arflare.com] 
Sent: Wednesday, December 14, 2011 12:31 PM
To: Jiang Wang
Cc: Jeff Kirsher; Jesse Brandeburg; Bruce Allan; Carolyn Wyborny; Don Skidmore; Greg Rose; Peter P Waskiewicz Jr; Alex Duyck; John Ronciak; e1000-devel@...ts.sourceforge.net; netdev@...r.kernel.org; linux-kernel@...r.kernel.org; Prasanna Panchamukhi; Chaitanya Lala; Francis St. Amant; miles.ito@...el.com
Subject: Re: [PATCH 1/2] e100: power down PHY if WOL is not enabled

On Tue, 2011-12-13 at 18:49 -0800, Jiang Wang wrote:
> Since the interface will not be used after being put down and WOL is 
> disabled, just power it off.
> When bring up the interface, power on the PHY.

Don't you need to cover the case where WOL is enabled while the interface is down?

Ben.

> Signed-off-by: Jiang Wang <Jiang.Wang@...erbed.com>
> ---
>  drivers/net/ethernet/intel/e100.c |   17 +++++++++++++++++
>  1 files changed, 17 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e100.c 
> b/drivers/net/ethernet/intel/e100.c
> index 5a2fdf7..9824e0a 100644
> --- a/drivers/net/ethernet/intel/e100.c
> +++ b/drivers/net/ethernet/intel/e100.c
> @@ -1449,6 +1449,14 @@ static int e100_phy_init(struct nic *nic)
>  		netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
>  			     "phy_addr = %d\n", nic->mii.phy_id);
>  
> +	/* Make sure power to the PHY is enabled */
> +	if (!(nic->flags & wol_magic)) {
> +		uint16_t phy_data;
> +		phy_data = mdio_read(nic->netdev, nic->mii.phy_id, MII_BMCR);
> +		phy_data &= ~BMCR_PDOWN;
> +		mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, phy_data);
> +	}
> +
>  	/* Get phy ID */
>  	id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
>  	id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); @@ -2261,6 
> +2269,15 @@ static void e100_down(struct nic *nic)
>  	napi_disable(&nic->napi);
>  	netif_stop_queue(nic->netdev);
>  	e100_hw_reset(nic);
> +
> +	/* If wake on LAN is not enabled, power down the PHY */
> +	if (!(nic->flags & wol_magic)) {
> +		uint16_t phy_data;
> +		phy_data = mdio_read(nic->netdev, nic->mii.phy_id, MII_BMCR);
> +		phy_data |= BMCR_PDOWN;
> +		mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, phy_data);
> +	}
> +
>  	free_irq(nic->pdev->irq, nic->netdev);
>  	del_timer_sync(&nic->watchdog);
>  	netif_carrier_off(nic->netdev);

--
Ben Hutchings, Staff Engineer, Solarflare Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.