| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <a4b2fd8d5b0f14b24cf6edbb618fa51daf8eefba.1324331816.git.jkrzyszt@tis.icnet.pl>
Date: Tue, 20 Dec 2011 00:08:52 +0100
From: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
To: Tony Lindgren <tony@...mide.com>
Cc: linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Janusz Krzysztofik <jkrzyszt@....icnet.pl>,
Grant Likely <grant.likely@...retlab.ca>
Subject: [PATCH v2 2/7] ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio
Once ready, ams-delta specific device drivers currently calling custom
ams_delta_latch[12]_write() functions can be updated to call generic
gpio_set_value() instead, which will make them less platform dependent.
Even more, some custom ams-delta only drivers can perhaps be dropped
from the tree after converting selected ams-delta platform devices to
follow generic GPIO based device models.
Depends on patch 1/7, "ARM: OMAP1: ams-delta: register latch dependent
devices later".
Signed-off-by: Janusz Krzysztofik <jkrzyszt@....icnet.pl>
---
Changes against initial version:
* refreshed on top of patch 1/7, which is the old 1/10 replacement,
* no need to BUG_ON() if GPIO request fails inside late_init(), can
return with error from there insted,
* dropped leading underscores from local symbols, variable and function
names (no namespace conflicts expected).
arch/arm/mach-omap1/Kconfig | 1 +
arch/arm/mach-omap1/board-ams-delta.c | 237 ++++++++++++++++++---
arch/arm/plat-omap/include/plat/board-ams-delta.h | 43 +++-
3 files changed, 242 insertions(+), 39 deletions(-)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 73f287d..d2606b1 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -155,6 +155,7 @@ config MACH_AMS_DELTA
bool "Amstrad E3 (Delta)"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select FIQ
+ select GPIO_GENERIC_PLATFORM
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 50987c9..cff2711 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -40,9 +41,6 @@
#include <mach/ams-delta-fiq.h>
-static u8 ams_delta_latch1_reg;
-static u16 ams_delta_latch2_reg;
-
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
@@ -121,39 +119,32 @@ static const unsigned int ams_delta_keymap[] = {
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
-void ams_delta_latch1_write(u8 mask, u8 value)
-{
- ams_delta_latch1_reg &= ~mask;
- ams_delta_latch1_reg |= value;
- *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg;
-}
-
-void ams_delta_latch2_write(u16 mask, u16 value)
-{
- ams_delta_latch2_reg &= ~mask;
- ams_delta_latch2_reg |= value;
- *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
-}
+#define LATCH1_PHYS 0x01000000
+#define LATCH1_VIRT 0xEA000000
+#define MODEM_PHYS 0x04000000
+#define MODEM_VIRT 0xEB000000
+#define LATCH2_PHYS 0x08000000
+#define LATCH2_VIRT 0xEC000000
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
- .virtual = AMS_DELTA_LATCH1_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
+ .virtual = LATCH1_VIRT,
+ .pfn = __phys_to_pfn(LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_LATCH2 */
{
- .virtual = AMS_DELTA_LATCH2_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
+ .virtual = LATCH2_VIRT,
+ .pfn = __phys_to_pfn(LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_MODEM */
{
- .virtual = AMS_DELTA_MODEM_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
+ .virtual = MODEM_VIRT,
+ .pfn = __phys_to_pfn(MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
@@ -173,6 +164,190 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
};
+static struct resource latch1_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH1_PHYS,
+ .end = LATCH1_PHYS + (AMS_DELTA_LATCH1_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata latch1_pdata __initconst = {
+ .base = AMS_DELTA_LATCH1_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH1_NGPIO,
+};
+
+static struct platform_device latch1_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 0,
+ .resource = latch1_resources,
+ .num_resources = ARRAY_SIZE(latch1_resources),
+ .dev = {
+ .platform_data = &latch1_pdata,
+ },
+};
+
+static struct resource latch2_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = LATCH2_PHYS,
+ .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata latch2_pdata __initconst = {
+ .base = AMS_DELTA_LATCH2_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH2_NGPIO,
+};
+
+static struct platform_device latch2_gpio_device = {
+ .name = "basic-mmio-gpio",
+ .id = 1,
+ .resource = latch2_resources,
+ .num_resources = ARRAY_SIZE(latch2_resources),
+ .dev = {
+ .platform_data = &latch2_pdata,
+ },
+};
+
+static struct gpio latch_gpios[] __initconst = {
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_camera",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_advert",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_email",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_handsfree",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_voicemail",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_voice",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit2",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "lcd_vblen",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "lcd_ndisp",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nce",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nre",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nwp",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nwe",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_ale",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_cle",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "keybrd_pwr",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "keybrd_dataout",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_rstin",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_cmdvcc",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_nreset",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_codec",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash2",
+ },
+};
+
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+{
+ int bit = 0;
+ u16 bitpos = 1 << bit;
+
+ for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
+ if (!(mask & bitpos))
+ continue;
+ gpio_set_value(base + bit, (value & bitpos) != 0);
+ }
+}
+EXPORT_SYMBOL(ams_delta_latch_write);
+
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -275,11 +450,13 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
};
static struct platform_device *ams_delta_devices[] __initdata = {
+ &latch1_gpio_device,
+ &latch2_gpio_device,
&ams_delta_kp_device,
&ams_delta_camera_device,
};
-static struct platform_device *late_devices[] __initdata = {
+static struct platform_device *late_devices[] __initconst = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
&ams_delta_led_device,
@@ -325,8 +502,8 @@ static void __init ams_delta_init(void)
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
- .membase = IOMEM(AMS_DELTA_MODEM_VIRT),
- .mapbase = AMS_DELTA_MODEM_PHYS,
+ .membase = IOMEM(MODEM_VIRT),
+ .mapbase = MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
@@ -352,8 +529,11 @@ static int __init late_init(void)
if (!machine_is_ams_delta())
return -ENODEV;
- /* Clear latch2 (NAND, LCD, modem enable) */
- ams_delta_latch2_write(~0, 0);
+ err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
+ if (err) {
+ pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
+ return err;
+ }
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
@@ -399,6 +579,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.init_machine = ams_delta_init,
.timer = &omap1_timer,
MACHINE_END
-
-EXPORT_SYMBOL(ams_delta_latch1_write);
-EXPORT_SYMBOL(ams_delta_latch2_write);
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102d..68ffe32 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,13 +28,6 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMS_DELTA_LATCH1_PHYS 0x01000000
-#define AMS_DELTA_LATCH1_VIRT 0xEA000000
-#define AMS_DELTA_MODEM_PHYS 0x04000000
-#define AMS_DELTA_MODEM_VIRT 0xEB000000
-#define AMS_DELTA_LATCH2_PHYS 0x08000000
-#define AMS_DELTA_LATCH2_VIRT 0xEC000000
-
#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
@@ -66,9 +59,41 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+#define AMS_DELTA_GPIO_PIN_LED_CAMERA 232
+#define AMS_DELTA_GPIO_PIN_LED_ADVERT 233
+#define AMS_DELTA_GPIO_PIN_LED_EMAIL 234
+#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE 235
+#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL 236
+#define AMS_DELTA_GPIO_PIN_LED_VOICE 237
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH1_GPIO_BASE AMS_DELTA_GPIO_PIN_LED_CAMERA
+#define AMS_DELTA_LATCH1_NGPIO 8
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch1_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \
+ AMS_DELTA_LATCH1_NGPIO, (mask), (value))
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
#endif
#endif /* CONFIG_MACH_AMS_DELTA */
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists