| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1324519802-23894-4-git-send-email-cheiny@synaptics.com>
Date: Wed, 21 Dec 2011 18:09:54 -0800
From: Christopher Heiny <cheiny@...aptics.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Jean Delvare <khali@...ux-fr.org>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Linux Input <linux-input@...r.kernel.org>,
Christopher Heiny <cheiny@...aptics.com>,
Joerie de Gram <j.de.gram@...il.com>,
Linus Walleij <linus.walleij@...ricsson.com>,
Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com>
Subject: [RFC PATCH 3/11] input: RMI4 physical layer drivers for I2C and SPI
Signed-off-by: Christopher Heiny <cheiny@...aptics.com>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: Linus Walleij <linus.walleij@...ricsson.com>
Cc: Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com>
Cc: Joeri de Gram <j.de.gram@...il.com>
---
drivers/input/rmi4/rmi_i2c.c | 428 +++++++++++++++++++++
drivers/input/rmi4/rmi_spi.c | 875 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1303 insertions(+), 0 deletions(-)
diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
new file mode 100644
index 0000000..88b4a11
--- /dev/null
+++ b/drivers/input/rmi4/rmi_i2c.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright (c) 2011 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/lockdep.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/rmi.h>
+
+#define COMMS_DEBUG 0
+
+#define IRQ_DEBUG 0
+
+#define RMI_PAGE_SELECT_REGISTER 0xff
+#define RMI_I2C_PAGE(addr) (((addr) >> 8) & 0xff)
+
+static char *phys_proto_name = "i2c";
+
+struct rmi_i2c_data {
+ struct mutex page_mutex;
+ int page;
+ int enabled;
+ int irq;
+ int irq_flags;
+ struct rmi_phys_device *phys;
+};
+
+static irqreturn_t rmi_i2c_irq_thread(int irq, void *p)
+{
+ struct rmi_phys_device *phys = p;
+ struct rmi_device *rmi_dev = phys->rmi_dev;
+ struct rmi_driver *driver = rmi_dev->driver;
+ struct rmi_device_platform_data *pdata = phys->dev->platform_data;
+
+#if IRQ_DEBUG
+ dev_dbg(phys->dev, "ATTN gpio, value: %d.\n",
+ gpio_get_value(pdata->attn_gpio));
+#endif
+ if (gpio_get_value(pdata->attn_gpio) == pdata->attn_polarity) {
+ phys->info.attn_count++;
+ if (driver && driver->irq_handler && rmi_dev)
+ driver->irq_handler(rmi_dev, irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * rmi_set_page - Set RMI page
+ * @phys: The pointer to the rmi_phys_device struct
+ * @page: The new page address.
+ *
+ * RMI devices have 16-bit addressing, but some of the physical
+ * implementations (like SMBus) only have 8-bit addressing. So RMI implements
+ * a page address at 0xff of every page so we can reliable page addresses
+ * every 256 registers.
+ *
+ * The page_mutex lock must be held when this function is entered.
+ *
+ * Returns zero on success, non-zero on failure.
+ */
+static int rmi_set_page(struct rmi_phys_device *phys, unsigned int page)
+{
+ struct i2c_client *client = to_i2c_client(phys->dev);
+ struct rmi_i2c_data *data = phys->data;
+ char txbuf[2] = {RMI_PAGE_SELECT_REGISTER, page};
+ int retval;
+
+#if COMMS_DEBUG
+ dev_dbg(&client->dev, "RMI4 I2C writes 3 bytes: %02x %02x\n",
+ txbuf[0], txbuf[1]);
+#endif
+ phys->info.tx_count++;
+ phys->info.tx_bytes += sizeof(txbuf);
+ retval = i2c_master_send(client, txbuf, sizeof(txbuf));
+ if (retval != sizeof(txbuf)) {
+ phys->info.tx_errs++;
+ dev_err(&client->dev,
+ "%s: set page failed: %d.", __func__, retval);
+ return (retval < 0) ? retval : -EIO;
+ }
+ data->page = page;
+ return 0;
+}
+
+static int rmi_i2c_write_block(struct rmi_phys_device *phys, u16 addr, u8 *buf,
+ int len)
+{
+ struct i2c_client *client = to_i2c_client(phys->dev);
+ struct rmi_i2c_data *data = phys->data;
+ u8 txbuf[len + 1];
+ int retval;
+#if COMMS_DEBUG
+ int i;
+#endif
+
+ txbuf[0] = addr & 0xff;
+ memcpy(txbuf + 1, buf, len);
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_I2C_PAGE(addr) != data->page) {
+ retval = rmi_set_page(phys, RMI_I2C_PAGE(addr));
+ if (retval < 0)
+ goto exit;
+ }
+
+#if COMMS_DEBUG
+ dev_dbg(&client->dev, "RMI4 I2C writes %d bytes: ", sizeof(txbuf));
+ for (i = 0; i < sizeof(txbuf); i++)
+ dev_dbg(&client->dev, "%02x ", txbuf[i]);
+ dev_dbg(&client->dev, "\n");
+#endif
+
+ phys->info.tx_count++;
+ phys->info.tx_bytes += sizeof(txbuf);
+ retval = i2c_master_send(client, txbuf, sizeof(txbuf));
+ if (retval < 0)
+ phys->info.tx_errs++;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return retval;
+}
+
+static int rmi_i2c_write(struct rmi_phys_device *phys, u16 addr, u8 data)
+{
+ int retval = rmi_i2c_write_block(phys, addr, &data, 1);
+ return (retval < 0) ? retval : 0;
+}
+
+static int rmi_i2c_read_block(struct rmi_phys_device *phys, u16 addr, u8 *buf,
+ int len)
+{
+ struct i2c_client *client = to_i2c_client(phys->dev);
+ struct rmi_i2c_data *data = phys->data;
+ u8 txbuf[1] = {addr & 0xff};
+ int retval;
+#if COMMS_DEBUG
+ int i;
+#endif
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_I2C_PAGE(addr) != data->page) {
+ retval = rmi_set_page(phys, RMI_I2C_PAGE(addr));
+ if (retval < 0)
+ goto exit;
+ }
+
+#if COMMS_DEBUG
+ dev_dbg(&client->dev, "RMI4 I2C writes 1 bytes: %02x\n", txbuf[0]);
+#endif
+ phys->info.tx_count++;
+ phys->info.tx_bytes += sizeof(txbuf);
+ retval = i2c_master_send(client, txbuf, sizeof(txbuf));
+ if (retval != sizeof(txbuf)) {
+ phys->info.tx_errs++;
+ retval = (retval < 0) ? retval : -EIO;
+ goto exit;
+ }
+
+ retval = i2c_master_recv(client, buf, len);
+
+ phys->info.rx_count++;
+ phys->info.rx_bytes += len;
+ if (retval < 0)
+ phys->info.rx_errs++;
+#if COMMS_DEBUG
+ else {
+ dev_dbg(&client->dev, "RMI4 I2C received %d bytes: ", len);
+ for (i = 0; i < len; i++)
+ dev_dbg(&client->dev, "%02x ", buf[i]);
+ dev_dbg(&client->dev, "\n");
+ }
+#endif
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return retval;
+}
+
+static int rmi_i2c_read(struct rmi_phys_device *phys, u16 addr, u8 *buf)
+{
+ int retval = rmi_i2c_read_block(phys, addr, buf, 1);
+ return (retval < 0) ? retval : 0;
+}
+
+
+static int acquire_attn_irq(struct rmi_i2c_data *data)
+{
+ return request_threaded_irq(data->irq, NULL, rmi_i2c_irq_thread,
+ data->irq_flags, dev_name(data->phys->dev), data->phys);
+}
+
+static int enable_device(struct rmi_phys_device *phys)
+{
+ int retval = 0;
+
+ struct rmi_i2c_data *data = phys->data;
+
+ if (data->enabled)
+ return 0;
+
+ retval = acquire_attn_irq(data);
+ if (retval)
+ goto error_exit;
+
+ data->enabled = true;
+ dev_dbg(phys->dev, "Physical device enabled.\n");
+ return 0;
+
+error_exit:
+ dev_err(phys->dev, "Failed to enable physical device. Code=%d.\n",
+ retval);
+ return retval;
+}
+
+
+static void disable_device(struct rmi_phys_device *phys)
+{
+ struct rmi_i2c_data *data = phys->data;
+
+ if (!data->enabled)
+ return;
+
+ disable_irq(data->irq);
+ free_irq(data->irq, data->phys);
+
+ dev_dbg(phys->dev, "Physical device disabled.\n");
+ data->enabled = false;
+}
+
+
+static int __devinit rmi_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct rmi_phys_device *rmi_phys;
+ struct rmi_i2c_data *data;
+ struct rmi_device_platform_data *pdata = client->dev.platform_data;
+ int error;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+ pr_info("%s: Probing %s (IRQ %d).\n", __func__,
+ pdata->sensor_name ? pdata->sensor_name : "-no name-",
+ pdata->attn_gpio);
+
+ error = i2c_check_functionality(client->adapter, I2C_FUNC_I2C);
+ if (!error) {
+ dev_err(&client->dev, "i2c_check_functionality error %d.\n",
+ error
+ );
+ return error;
+ }
+
+ rmi_phys = kzalloc(sizeof(struct rmi_phys_device), GFP_KERNEL);
+ if (!rmi_phys)
+ return -ENOMEM;
+
+ data = kzalloc(sizeof(struct rmi_i2c_data), GFP_KERNEL);
+ if (!data) {
+ error = -ENOMEM;
+ goto err_phys;
+ }
+
+ data->enabled = true; /* We plan to come up enabled. */
+ data->irq = gpio_to_irq(pdata->attn_gpio);
+ data->irq_flags = (pdata->attn_polarity == RMI_ATTN_ACTIVE_HIGH) ?
+ IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+ data->phys = rmi_phys;
+
+ rmi_phys->data = data;
+ rmi_phys->dev = &client->dev;
+
+ rmi_phys->write = rmi_i2c_write;
+ rmi_phys->write_block = rmi_i2c_write_block;
+ rmi_phys->read = rmi_i2c_read;
+ rmi_phys->read_block = rmi_i2c_read_block;
+ rmi_phys->enable_device = enable_device;
+ rmi_phys->disable_device = disable_device;
+
+ rmi_phys->info.proto = phys_proto_name;
+
+ mutex_init(&data->page_mutex);
+
+ /* Setting the page to zero will (a) make sure the PSR is in a
+ * known state, and (b) make sure we can talk to the device.
+ */
+ error = rmi_set_page(rmi_phys, 0);
+ if (error) {
+ dev_err(&client->dev, "Failed to set page select to 0.\n");
+ goto err_data;
+ }
+
+ if (pdata->gpio_config) {
+ error = pdata->gpio_config(pdata->gpio_data, true);
+ if (error < 0) {
+ dev_err(&client->dev, "failed to setup irq %d\n",
+ pdata->attn_gpio);
+ goto err_data;
+ }
+ }
+
+ error = rmi_register_phys_device(rmi_phys);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to register physical driver at 0x%.2X.\n",
+ client->addr);
+ goto err_data;
+ }
+ i2c_set_clientdata(client, rmi_phys);
+
+ if (pdata->attn_gpio > 0) {
+ error = acquire_attn_irq(data);
+ if (error < 0) {
+ dev_err(&client->dev,
+ "request_threaded_irq failed %d\n",
+ pdata->attn_gpio);
+ goto err_unregister;
+ }
+ }
+
+#if defined(CONFIG_RMI4_DEV)
+ error = gpio_export(pdata->attn_gpio, false);
+ if (error) {
+ dev_warn(&client->dev, "%s: WARNING: Failed to "
+ "export ATTN gpio!\n", __func__);
+ error = 0;
+ } else {
+ error = gpio_export_link(&(rmi_phys->rmi_dev->dev), "attn",
+ pdata->attn_gpio);
+ if (error) {
+ dev_warn(&(rmi_phys->rmi_dev->dev), "%s: WARNING: "
+ "Failed to symlink ATTN gpio!\n", __func__);
+ error = 0;
+ } else {
+ dev_info(&(rmi_phys->rmi_dev->dev),
+ "%s: Exported GPIO %d.", __func__,
+ pdata->attn_gpio);
+ }
+ }
+#endif /* CONFIG_RMI4_DEV */
+
+ dev_info(&client->dev, "registered rmi i2c driver at 0x%.2X.\n",
+ client->addr);
+ return 0;
+
+err_unregister:
+ rmi_unregister_phys_device(rmi_phys);
+err_data:
+ kfree(data);
+err_phys:
+ kfree(rmi_phys);
+ return error;
+}
+
+static int __devexit rmi_i2c_remove(struct i2c_client *client)
+{
+ struct rmi_phys_device *phys = i2c_get_clientdata(client);
+ struct rmi_device_platform_data *pd = client->dev.platform_data;
+
+ rmi_unregister_phys_device(phys);
+ kfree(phys->data);
+ kfree(phys);
+
+ if (pd->gpio_config)
+ pd->gpio_config(&client->dev, false);
+
+ return 0;
+}
+
+static const struct i2c_device_id rmi_id[] = {
+ { "rmi", 0 },
+ { "rmi-i2c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rmi_id);
+
+static struct i2c_driver rmi_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rmi-i2c"
+ },
+ .id_table = rmi_id,
+ .probe = rmi_i2c_probe,
+ .remove = __devexit_p(rmi_i2c_remove),
+};
+
+static int __init rmi_i2c_init(void)
+{
+ return i2c_add_driver(&rmi_i2c_driver);
+}
+
+static void __exit rmi_i2c_exit(void)
+{
+ i2c_del_driver(&rmi_i2c_driver);
+}
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@...aptics.com>");
+MODULE_DESCRIPTION("RMI I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(rmi_i2c_init);
+module_exit(rmi_i2c_exit);
diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c
new file mode 100644
index 0000000..725c8f1
--- /dev/null
+++ b/drivers/input/rmi4/rmi_spi.c
@@ -0,0 +1,875 @@
+/*
+ * Copyright (c) 2011 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/rmi.h>
+
+#define COMMS_DEBUG 0
+
+#define RMI_PROTOCOL_VERSION_ADDRESS 0xa0fd
+#define SPI_V2_UNIFIED_READ 0xc0
+#define SPI_V2_WRITE 0x40
+#define SPI_V2_PREPARE_SPLIT_READ 0xc8
+#define SPI_V2_EXECUTE_SPLIT_READ 0xca
+
+#define RMI_SPI_BLOCK_DELAY_US 65
+#define RMI_SPI_BYTE_DELAY_US 65
+#define RMI_SPI_WRITE_DELAY_US 0
+
+#define RMI_V1_READ_FLAG 0x80
+
+#define RMI_PAGE_SELECT_REGISTER 0x00FF
+#define RMI_SPI_PAGE(addr) (((addr) >> 8) & 0x80)
+
+#define DEFAULT_POLL_INTERVAL_MS 13
+
+static char *spi_v1_proto_name = "spi";
+static char *spi_v2_proto_name = "spiv2";
+
+struct rmi_spi_data {
+ struct mutex page_mutex;
+ int page;
+ int (*set_page) (struct rmi_phys_device *phys, u8 page);
+ bool split_read_pending;
+ int enabled;
+ int irq;
+ int irq_flags;
+ struct rmi_phys_device *phys;
+ struct completion irq_comp;
+
+ /* Following are used when polling. */
+ struct hrtimer poll_timer;
+ struct work_struct poll_work;
+ int poll_interval;
+
+};
+
+static irqreturn_t rmi_spi_hard_irq(int irq, void *p)
+{
+ struct rmi_phys_device *phys = p;
+ struct rmi_spi_data *data = phys->data;
+ struct rmi_device_platform_data *pdata = phys->dev->platform_data;
+
+ if (data->split_read_pending &&
+ gpio_get_value(pdata->attn_gpio) ==
+ pdata->attn_polarity) {
+ phys->info.attn_count++;
+ complete(&data->irq_comp);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t rmi_spi_irq_thread(int irq, void *p)
+{
+ struct rmi_phys_device *phys = p;
+ struct rmi_device *rmi_dev = phys->rmi_dev;
+ struct rmi_driver *driver = rmi_dev->driver;
+ struct rmi_device_platform_data *pdata = phys->dev->platform_data;
+
+ if (gpio_get_value(pdata->attn_gpio) == pdata->attn_polarity) {
+ phys->info.attn_count++;
+ if (driver && driver->irq_handler)
+ driver->irq_handler(rmi_dev, irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void spi_poll_work(struct work_struct *work)
+{
+ struct rmi_spi_data *data =
+ container_of(work, struct rmi_spi_data, poll_work);
+ struct rmi_device *rmi_dev = data->phys->rmi_dev;
+ struct rmi_driver *driver = rmi_dev->driver;
+
+ if (driver && driver->irq_handler)
+ driver->irq_handler(rmi_dev, 0);
+}
+
+/* This is the timer function for polling - it simply has to schedule work
+ * and restart the timer. */
+static enum hrtimer_restart spi_poll_timer(struct hrtimer *timer)
+{
+ struct rmi_spi_data *data =
+ container_of(timer, struct rmi_spi_data, poll_timer);
+
+ if (!work_pending(&data->poll_work))
+ schedule_work(&data->poll_work);
+ hrtimer_start(&data->poll_timer, ktime_set(0, data->poll_interval),
+ HRTIMER_MODE_REL);
+ return HRTIMER_NORESTART;
+}
+
+
+
+static int rmi_spi_xfer(struct rmi_phys_device *phys,
+ const u8 *txbuf, unsigned n_tx, u8 *rxbuf, unsigned n_rx)
+{
+ struct spi_device *client = to_spi_device(phys->dev);
+ struct rmi_spi_data *v2_data = phys->data;
+ struct rmi_device_platform_data *pdata = phys->dev->platform_data;
+ int status;
+ struct spi_message message;
+ struct spi_transfer *xfers;
+ int total_bytes = n_tx + n_rx;
+ u8 local_buf[total_bytes];
+ int xfer_count = 0;
+ int xfer_index = 0;
+ int block_delay = n_rx > 0 ? pdata->spi_data.block_delay_us : 0;
+ int byte_delay = n_rx > 1 ? pdata->spi_data.read_delay_us : 0;
+ int write_delay = n_tx > 1 ? pdata->spi_data.write_delay_us : 0;
+#if COMMS_DEBUG
+ int i;
+#endif
+
+ if (v2_data->split_read_pending) {
+ block_delay =
+ n_rx > 0 ? pdata->spi_data.split_read_block_delay_us : 0;
+ byte_delay =
+ n_tx > 1 ? pdata->spi_data.split_read_byte_delay_us : 0;
+ write_delay = 0;
+ }
+
+ if (n_tx) {
+ phys->info.tx_count++;
+ phys->info.tx_bytes += n_tx;
+ if (write_delay)
+ xfer_count += n_tx;
+ else
+ xfer_count += 1;
+ }
+
+ if (n_rx) {
+ phys->info.rx_count++;
+ phys->info.rx_bytes += n_rx;
+ if (byte_delay)
+ xfer_count += n_rx;
+ else
+ xfer_count += 1;
+ }
+
+ xfers = kcalloc(xfer_count,
+ sizeof(struct spi_transfer), GFP_KERNEL);
+ if (!xfers)
+ return -ENOMEM;
+
+ spi_message_init(&message);
+
+ if (n_tx) {
+ if (write_delay) {
+ for (xfer_index = 0; xfer_index < n_tx;
+ xfer_index++) {
+ memset(&xfers[xfer_index], 0,
+ sizeof(struct spi_transfer));
+ xfers[xfer_index].len = 1;
+ xfers[xfer_index].delay_usecs = write_delay;
+ xfers[xfer_index].tx_buf = txbuf + xfer_index;
+ spi_message_add_tail(&xfers[xfer_index],
+ &message);
+ }
+ } else {
+ memset(&xfers[0], 0, sizeof(struct spi_transfer));
+ xfers[0].len = n_tx;
+ spi_message_add_tail(&xfers[0], &message);
+ memcpy(local_buf, txbuf, n_tx);
+ xfers[0].tx_buf = local_buf;
+ xfer_index++;
+ }
+ if (block_delay)
+ xfers[xfer_index-1].delay_usecs = block_delay;
+ }
+ if (n_rx) {
+ if (byte_delay) {
+ int buffer_offset = n_tx;
+ for (; xfer_index < xfer_count; xfer_index++) {
+ memset(&xfers[xfer_index], 0,
+ sizeof(struct spi_transfer));
+ xfers[xfer_index].len = 1;
+ xfers[xfer_index].delay_usecs = byte_delay;
+ xfers[xfer_index].rx_buf =
+ local_buf + buffer_offset;
+ buffer_offset++;
+ spi_message_add_tail(&xfers[xfer_index],
+ &message);
+ }
+ } else {
+ memset(&xfers[xfer_index], 0,
+ sizeof(struct spi_transfer));
+ xfers[xfer_index].len = n_rx;
+ xfers[xfer_index].rx_buf = local_buf + n_tx;
+ spi_message_add_tail(&xfers[xfer_index], &message);
+ xfer_index++;
+ }
+ }
+
+#if COMMS_DEBUG
+ if (n_tx) {
+ dev_dbg(&client->dev, "SPI sends %d bytes: ", n_tx);
+ for (i = 0; i < n_tx; i++)
+ dev_dbg(&client->dev, "%02X ", txbuf[i]);
+ dev_dbg(&client->dev, "\n");
+ }
+#endif
+
+ /* do the i/o */
+ if (pdata->spi_data.cs_assert) {
+ status = pdata->spi_data.cs_assert(
+ pdata->spi_data.cs_assert_data, true);
+ if (!status) {
+ dev_err(phys->dev, "Failed to assert CS.");
+ /* nonzero means error */
+ status = -1;
+ goto error_exit;
+ } else
+ status = 0;
+ }
+
+ if (pdata->spi_data.pre_delay_us)
+ udelay(pdata->spi_data.pre_delay_us);
+
+ status = spi_sync(client, &message);
+
+ if (pdata->spi_data.post_delay_us)
+ udelay(pdata->spi_data.post_delay_us);
+
+ if (pdata->spi_data.cs_assert) {
+ status = pdata->spi_data.cs_assert(
+ pdata->spi_data.cs_assert_data, false);
+ if (!status) {
+ dev_err(phys->dev, "Failed to deassert CS.");
+ /* nonzero means error */
+ status = -1;
+ goto error_exit;
+ } else
+ status = 0;
+ }
+
+ if (status == 0) {
+ memcpy(rxbuf, local_buf + n_tx, n_rx);
+ status = message.status;
+ } else {
+ phys->info.tx_errs++;
+ phys->info.rx_errs++;
+ dev_err(phys->dev, "spi_sync failed with error code %d.",
+ status);
+ }
+
+#if COMMS_DEBUG
+ if (n_rx) {
+ dev_dbg(&client->dev, "SPI received %d bytes: ", n_rx);
+ for (i = 0; i n_rx; i++)
+ dev_dbg(&client->dev, "%02X ", rxbuf[i]);
+ dev_dbg(&client->dev, "\n");
+ }
+#endif
+
+error_exit:
+ kfree(xfers);
+ return status;
+}
+
+static int rmi_spi_v2_write_block(struct rmi_phys_device *phys, u16 addr,
+ u8 *buf, int len)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[len + 4];
+ int error;
+
+ txbuf[0] = SPI_V2_WRITE;
+ txbuf[1] = (addr >> 8) & 0x00FF;
+ txbuf[2] = addr & 0x00FF;
+ txbuf[3] = len;
+
+ memcpy(&txbuf[4], buf, len);
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_SPI_PAGE(addr) != data->page) {
+ error = data->set_page(phys, RMI_SPI_PAGE(addr));
+ if (error < 0)
+ goto exit;
+ }
+
+ error = rmi_spi_xfer(phys, buf, len + 4, NULL, 0);
+ if (error < 0)
+ goto exit;
+ error = len;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return error;
+}
+
+static int rmi_spi_v2_write(struct rmi_phys_device *phys, u16 addr, u8 data)
+{
+ int error = rmi_spi_v2_write_block(phys, addr, &data, 1);
+
+ return (error == 1) ? 0 : error;
+}
+
+static int rmi_spi_v1_write_block(struct rmi_phys_device *phys, u16 addr,
+ u8 *buf, int len)
+{
+ struct rmi_spi_data *data = phys->data;
+ unsigned char txbuf[len + 2];
+ int error;
+
+ txbuf[0] = addr >> 8;
+ txbuf[1] = addr;
+ memcpy(txbuf+2, buf, len);
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_SPI_PAGE(addr) != data->page) {
+ error = data->set_page(phys, RMI_SPI_PAGE(addr));
+ if (error < 0)
+ goto exit;
+ }
+
+ error = rmi_spi_xfer(phys, txbuf, len + 2, NULL, 0);
+ if (error < 0)
+ goto exit;
+ error = len;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return error;
+}
+
+static int rmi_spi_v1_write(struct rmi_phys_device *phys, u16 addr, u8 data)
+{
+ int error = rmi_spi_v1_write_block(phys, addr, &data, 1);
+
+ return (error == 1) ? 0 : error;
+}
+
+static int rmi_spi_v2_split_read_block(struct rmi_phys_device *phys, u16 addr,
+ u8 *buf, int len)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[4];
+ u8 rxbuf[len + 1]; /* one extra byte for read length */
+ int error;
+
+ txbuf[0] = SPI_V2_PREPARE_SPLIT_READ;
+ txbuf[1] = (addr >> 8) & 0x00FF;
+ txbuf[2] = addr & 0x00ff;
+ txbuf[3] = len;
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_SPI_PAGE(addr) != data->page) {
+ error = data->set_page(phys, RMI_SPI_PAGE(addr));
+ if (error < 0)
+ goto exit;
+ }
+
+ data->split_read_pending = true;
+
+ error = rmi_spi_xfer(phys, txbuf, 4, NULL, 0);
+ if (error < 0) {
+ data->split_read_pending = false;
+ goto exit;
+ }
+
+ wait_for_completion(&data->irq_comp);
+
+ txbuf[0] = SPI_V2_EXECUTE_SPLIT_READ;
+ txbuf[1] = 0;
+
+ error = rmi_spi_xfer(phys, txbuf, 2, rxbuf, len + 1);
+ data->split_read_pending = false;
+ if (error < 0)
+ goto exit;
+
+ /* first byte is length */
+ if (rxbuf[0] != len) {
+ error = -EIO;
+ goto exit;
+ }
+
+ memcpy(buf, rxbuf + 1, len);
+ error = len;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return error;
+}
+
+static int rmi_spi_v2_read_block(struct rmi_phys_device *phys, u16 addr,
+ u8 *buf, int len)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[4];
+ int error;
+
+ txbuf[0] = SPI_V2_UNIFIED_READ;
+ txbuf[1] = (addr >> 8) & 0x00FF;
+ txbuf[2] = addr & 0x00ff;
+ txbuf[3] = len;
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_SPI_PAGE(addr) != data->page) {
+ error = data->set_page(phys, RMI_SPI_PAGE(addr));
+ if (error < 0)
+ goto exit;
+ }
+
+ error = rmi_spi_xfer(phys, txbuf, 4, buf, len);
+ if (error < 0)
+ goto exit;
+ error = len;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return error;
+}
+
+static int rmi_spi_v2_read(struct rmi_phys_device *phys, u16 addr, u8 *buf)
+{
+ int error = rmi_spi_v2_read_block(phys, addr, buf, 1);
+
+ return (error == 1) ? 0 : error;
+}
+
+static int rmi_spi_v1_read_block(struct rmi_phys_device *phys, u16 addr,
+ u8 *buf, int len)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[2];
+ int error;
+
+ txbuf[0] = (addr >> 8) | RMI_V1_READ_FLAG;
+ txbuf[1] = addr;
+
+ mutex_lock(&data->page_mutex);
+
+ if (RMI_SPI_PAGE(addr) != data->page) {
+ error = data->set_page(phys, RMI_SPI_PAGE(addr));
+ if (error < 0)
+ goto exit;
+ }
+
+ error = rmi_spi_xfer(phys, txbuf, 2, buf, len);
+ if (error < 0)
+ goto exit;
+ error = len;
+
+exit:
+ mutex_unlock(&data->page_mutex);
+ return error;
+}
+
+static int rmi_spi_v1_read(struct rmi_phys_device *phys, u16 addr, u8 *buf)
+{
+ int error = rmi_spi_v1_read_block(phys, addr, buf, 1);
+
+ return (error == 1) ? 0 : error;
+}
+
+#define RMI_SPI_PAGE_SELECT_WRITE_LENGTH 1
+
+static int rmi_spi_v1_set_page(struct rmi_phys_device *phys, u8 page)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[] = {RMI_PAGE_SELECT_REGISTER >> 8,
+ RMI_PAGE_SELECT_REGISTER & 0xFF, page};
+ int error;
+
+ error = rmi_spi_xfer(phys, txbuf, sizeof(txbuf), NULL, 0);
+ if (error < 0) {
+ dev_err(phys->dev, "Failed to set page select, code: %d.\n",
+ error);
+ return error;
+ }
+
+ data->page = page;
+
+ return RMI_SPI_PAGE_SELECT_WRITE_LENGTH;
+}
+
+static int rmi_spi_v2_set_page(struct rmi_phys_device *phys, u8 page)
+{
+ struct rmi_spi_data *data = phys->data;
+ u8 txbuf[] = {SPI_V2_WRITE, RMI_PAGE_SELECT_REGISTER >> 8,
+ RMI_PAGE_SELECT_REGISTER & 0xFF,
+ RMI_SPI_PAGE_SELECT_WRITE_LENGTH, page};
+ int error;
+
+ error = rmi_spi_xfer(phys, txbuf, sizeof(txbuf), NULL, 0);
+ if (error < 0) {
+ dev_err(phys->dev, "Failed to set page select, code: %d.\n",
+ error);
+ return error;
+ }
+
+ data->page = page;
+
+ return RMI_SPI_PAGE_SELECT_WRITE_LENGTH;
+}
+
+
+static int acquire_attn_irq(struct rmi_spi_data *data)
+{
+ int retval;
+ struct rmi_phys_device *rmi_phys = data->phys;
+
+ retval = request_threaded_irq(data->irq, rmi_spi_hard_irq,
+ rmi_spi_irq_thread, data->irq_flags,
+ dev_name(rmi_phys->dev), rmi_phys);
+ if (retval < 0) {
+ dev_err(&(rmi_phys->rmi_dev->dev), "request_threaded_irq "
+ "failed, code: %d.\n", retval);
+ }
+ return retval;
+}
+
+static int setup_attn(struct rmi_spi_data *data)
+{
+ int retval;
+ struct rmi_phys_device *rmi_phys = data->phys;
+ struct rmi_device_platform_data *pdata = rmi_phys->dev->platform_data;
+
+ retval = acquire_attn_irq(data);
+ if (retval < 0)
+ return retval;
+
+#if defined(CONFIG_RMI4_DEV)
+ retval = gpio_export(pdata->attn_gpio, false);
+ if (retval) {
+ dev_warn(&(rmi_phys->rmi_dev->dev),
+ "WARNING: Failed to export ATTN gpio!\n");
+ retval = 0;
+ } else {
+ retval = gpio_export_link(&(rmi_phys->rmi_dev->dev), "attn",
+ pdata->attn_gpio);
+ if (retval) {
+ dev_warn(&(rmi_phys->rmi_dev->dev), "WARNING: "
+ "Failed to symlink ATTN gpio!\n");
+ retval = 0;
+ } else {
+ dev_info(&(rmi_phys->rmi_dev->dev),
+ "%s: Exported GPIO %d.", __func__,
+ pdata->attn_gpio);
+ }
+ }
+#endif /* CONFIG_RMI4_DEV */
+
+ return retval;
+}
+
+static int setup_polling(struct rmi_spi_data *data)
+{
+ INIT_WORK(&data->poll_work, spi_poll_work);
+ hrtimer_init(&data->poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ data->poll_timer.function = spi_poll_timer;
+ hrtimer_start(&data->poll_timer, ktime_set(1, 0), HRTIMER_MODE_REL);
+
+ return 0;
+}
+
+static int enable_device(struct rmi_phys_device *phys)
+{
+ int retval = 0;
+
+ struct rmi_spi_data *data = phys->data;
+
+ if (data->enabled) {
+ dev_dbg(phys->dev, "Physical device already enabled.\n");
+ return 0;
+ }
+
+ retval = acquire_attn_irq(data);
+ if (retval)
+ goto error_exit;
+
+ data->enabled = true;
+ dev_dbg(phys->dev, "Physical device enabled.\n");
+ return 0;
+
+error_exit:
+ dev_err(phys->dev, "Failed to enable physical device. Code=%d.\n",
+ retval);
+ return retval;
+}
+
+static void disable_device(struct rmi_phys_device *phys)
+{
+ struct rmi_spi_data *data = phys->data;
+
+ if (!data->enabled) {
+ dev_warn(phys->dev, "Physical device already disabled.\n");
+ return;
+ }
+ disable_irq(data->irq);
+ free_irq(data->irq, data->phys);
+
+ dev_dbg(phys->dev, "Physical device disabled.\n");
+ data->enabled = false;
+}
+
+#define DUMMY_READ_SLEEP_US 10
+
+static int rmi_spi_check_device(struct rmi_phys_device *rmi_phys)
+{
+ u8 buf[6];
+ int error;
+ int i;
+
+ /* Some SPI subsystems return 0 for the very first read you do. So
+ * we use this dummy read to get that out of the way.
+ */
+ error = rmi_spi_v1_read_block(rmi_phys, PDT_START_SCAN_LOCATION,
+ buf, sizeof(buf));
+ if (error < 0) {
+ dev_err(rmi_phys->dev, "dummy read failed with %d.\n", error);
+ return error;
+ }
+ udelay(DUMMY_READ_SLEEP_US);
+
+ /* Force page select to 0.
+ */
+ error = rmi_spi_v1_set_page(rmi_phys, 0x00);
+ if (error < 0)
+ return error;
+
+ /* Now read the first PDT entry. We know where this is, and if the
+ * RMI4 device is out there, these 6 bytes will be something other
+ * than all 0x00 or 0xFF. We need to check for 0x00 and 0xFF,
+ * because many (maybe all) SPI implementations will return all 0x00
+ * or all 0xFF on read if the device is not connected.
+ */
+ error = rmi_spi_v1_read_block(rmi_phys, PDT_START_SCAN_LOCATION,
+ buf, sizeof(buf));
+ if (error < 0) {
+ dev_err(rmi_phys->dev, "probe read failed with %d.\n", error);
+ return error;
+ }
+ for (i = 0; i < sizeof(buf); i++) {
+ if (buf[i] != 0x00 && buf[i] != 0xFF)
+ return error;
+ }
+
+ dev_err(rmi_phys->dev, "probe read returned invalid block.\n");
+ return -ENODEV;
+}
+
+
+static int __devinit rmi_spi_probe(struct spi_device *spi)
+{
+ struct rmi_phys_device *rmi_phys;
+ struct rmi_spi_data *data;
+ struct rmi_device_platform_data *pdata = spi->dev.platform_data;
+ u8 buf[2];
+ int retval;
+
+ if (!pdata) {
+ dev_err(&spi->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ if (spi->master->flags & SPI_MASTER_HALF_DUPLEX)
+ return -EINVAL;
+
+ spi->bits_per_word = 8;
+ spi->mode = SPI_MODE_3;
+ retval = spi_setup(spi);
+ if (retval < 0) {
+ dev_err(&spi->dev, "spi_setup failed!\n");
+ return retval;
+ }
+
+ rmi_phys = kzalloc(sizeof(struct rmi_phys_device), GFP_KERNEL);
+ if (!rmi_phys)
+ return -ENOMEM;
+
+ data = kzalloc(sizeof(struct rmi_spi_data), GFP_KERNEL);
+ if (!data) {
+ retval = -ENOMEM;
+ goto err_phys;
+ }
+ data->enabled = true; /* We plan to come up enabled. */
+ data->irq = gpio_to_irq(pdata->attn_gpio);
+ data->irq_flags = (pdata->attn_polarity == RMI_ATTN_ACTIVE_HIGH) ?
+ IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+ data->phys = rmi_phys;
+
+ rmi_phys->data = data;
+ rmi_phys->dev = &spi->dev;
+
+ rmi_phys->write = rmi_spi_v1_write;
+ rmi_phys->write_block = rmi_spi_v1_write_block;
+ rmi_phys->read = rmi_spi_v1_read;
+ rmi_phys->read_block = rmi_spi_v1_read_block;
+ rmi_phys->enable_device = enable_device;
+ rmi_phys->disable_device = disable_device;
+ data->set_page = rmi_spi_v1_set_page;
+
+ rmi_phys->info.proto = spi_v1_proto_name;
+
+ mutex_init(&data->page_mutex);
+
+ dev_set_drvdata(&spi->dev, rmi_phys);
+
+ pdata->spi_data.block_delay_us = pdata->spi_data.block_delay_us ?
+ pdata->spi_data.block_delay_us : RMI_SPI_BLOCK_DELAY_US;
+ pdata->spi_data.read_delay_us = pdata->spi_data.read_delay_us ?
+ pdata->spi_data.read_delay_us : RMI_SPI_BYTE_DELAY_US;
+ pdata->spi_data.write_delay_us = pdata->spi_data.write_delay_us ?
+ pdata->spi_data.write_delay_us : RMI_SPI_BYTE_DELAY_US;
+ pdata->spi_data.split_read_block_delay_us =
+ pdata->spi_data.split_read_block_delay_us ?
+ pdata->spi_data.split_read_block_delay_us :
+ RMI_SPI_BLOCK_DELAY_US;
+ pdata->spi_data.split_read_byte_delay_us =
+ pdata->spi_data.split_read_byte_delay_us ?
+ pdata->spi_data.split_read_byte_delay_us :
+ RMI_SPI_BYTE_DELAY_US;
+
+ if (pdata->gpio_config) {
+ retval = pdata->gpio_config(pdata->gpio_data, true);
+ if (retval < 0) {
+ dev_err(&spi->dev, "Failed to setup GPIOs, code: %d.\n",
+ retval);
+ goto err_data;
+ }
+ }
+
+ retval = rmi_spi_check_device(rmi_phys);
+ if (retval < 0)
+ goto err_data;
+
+ /* check if this is an SPI v2 device */
+ retval = rmi_spi_v1_read_block(rmi_phys, RMI_PROTOCOL_VERSION_ADDRESS,
+ buf, 2);
+ if (retval < 0) {
+ dev_err(&spi->dev, "failed to get SPI version number!\n");
+ goto err_data;
+ }
+ dev_dbg(&spi->dev, "SPI version is %d", buf[0]);
+
+ if (buf[0] == 1) {
+ /* SPIv2 */
+ rmi_phys->write = rmi_spi_v2_write;
+ rmi_phys->write_block = rmi_spi_v2_write_block;
+ rmi_phys->read = rmi_spi_v2_read;
+ data->set_page = rmi_spi_v2_set_page;
+
+ rmi_phys->info.proto = spi_v2_proto_name;
+
+ if (pdata->attn_gpio > 0) {
+ init_completion(&data->irq_comp);
+ rmi_phys->read_block = rmi_spi_v2_split_read_block;
+ } else {
+ dev_warn(&spi->dev, "WARNING: SPI V2 detected, but no "
+ "attention GPIO was specified. This is unlikely"
+ " to work well.\n");
+ rmi_phys->read_block = rmi_spi_v2_read_block;
+ }
+ } else if (buf[0] != 0) {
+ dev_err(&spi->dev, "Unrecognized SPI version %d.\n", buf[0]);
+ retval = -ENODEV;
+ goto err_data;
+ }
+
+ retval = rmi_register_phys_device(rmi_phys);
+ if (retval) {
+ dev_err(&spi->dev, "failed to register physical driver\n");
+ goto err_data;
+ }
+
+ if (pdata->attn_gpio > 0) {
+ retval = setup_attn(data);
+ if (retval < 0)
+ goto err_unregister;
+ } else {
+ retval = setup_polling(data);
+ if (retval < 0)
+ goto err_unregister;
+ }
+
+ dev_info(&spi->dev, "registered RMI SPI driver\n");
+ return 0;
+
+err_unregister:
+ rmi_unregister_phys_device(rmi_phys);
+err_data:
+ kfree(data);
+err_phys:
+ kfree(rmi_phys);
+ return retval;
+}
+
+static int __devexit rmi_spi_remove(struct spi_device *spi)
+{
+ struct rmi_phys_device *phys = dev_get_drvdata(&spi->dev);
+ struct rmi_device_platform_data *pd = spi->dev.platform_data;
+
+ rmi_unregister_phys_device(phys);
+ kfree(phys->data);
+ kfree(phys);
+
+ if (pd->gpio_config)
+ pd->gpio_config(&spi->dev, false);
+
+ return 0;
+}
+
+static const struct spi_device_id rmi_id[] = {
+ { "rmi", 0 },
+ { "rmi-spi", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, rmi_id);
+
+static struct spi_driver rmi_spi_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rmi-spi",
+ },
+ .id_table = rmi_id,
+ .probe = rmi_spi_probe,
+ .remove = __devexit_p(rmi_spi_remove),
+};
+
+static int __init rmi_spi_init(void)
+{
+ return spi_register_driver(&rmi_spi_driver);
+}
+
+static void __exit rmi_spi_exit(void)
+{
+ spi_unregister_driver(&rmi_spi_driver);
+}
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@...aptics.com>");
+MODULE_DESCRIPTION("RMI SPI driver");
+MODULE_LICENSE("GPL");
+
+module_init(rmi_spi_init);
+module_exit(rmi_spi_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists