| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20111228162431.206d16c1671679526958bf7e@canb.auug.org.au>
Date: Wed, 28 Dec 2011 16:24:31 +1100
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Greg KH <greg@...ah.com>
Cc: linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Kukjin Kim <kgene.kim@...sung.com>,
Russell King <rmk@....linux.org.uk>,
Kay Sievers <kay.sievers@...y.org>
Subject: Re: linux-next: manual merge of the driver-core tree with the arm
tree
Hi again,
On Wed, 28 Dec 2011 16:12:31 +1100 Stephen Rothwell <sfr@...b.auug.org.au> wrote:
>
> Today's linux-next merge of the driver-core tree got a conflict in
> arch/arm/mach-s3c64xx/common.c between commit b024043b6d0d ("ARM: 7245/1:
> S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch]") from the arm tree
> and commit edbaa603eb80 ("driver-core: remove sysdev.h usage") from the
> driver-core tree (where it is called arch/arm/mach-s3c64xx/irq-eint.c).
>
> Just context changes. I fixed it up (see below) and can carry the fix as
> necessary.
Actually, I the fix was more extensive (see below).
--
Cheers,
Stephen Rothwell sfr@...b.auug.org.au
diff --cc arch/arm/mach-s3c64xx/common.c
index 8ae5b16,e3e75d1..0000000
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@@ -15,182 -13,21 +15,183 @@@
*/
#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
- #include <linux/sysdev.h>
+ #include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/hardware/vic.h>
-#include <plat/regs-irqtype.h>
+#include <mach/map.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/map.h>
#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6400_map_io,
+ .init_clocks = s3c6400_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6400_init,
+ .name = name_s3c6400,
+ }, {
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6410_map_io,
+ .init_clocks = s3c6410_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6410_init,
+ .name = name_s3c6410,
+ },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S3C_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
+ },
+};
+
- struct sysdev_class s3c64xx_sysclass = {
- .name = "s3c64xx-core",
++struct bus_type s3c64xx_subsys = {
++ .name = "s3c64xx-core",
++ .dev_name = "s3c64xx-core",
+};
+
- static struct sys_device s3c64xx_sysdev = {
- .cls = &s3c64xx_sysclass,
++static struct device s3c64xx_dev = {
++ .bus = &s3c64xx_subsys,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+ iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
+
+ /* detect cpu id */
+ s3c64xx_init_cpu();
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
- static __init int s3c64xx_sysdev_init(void)
++static __init int s3c64xx_dev_init(void)
+{
- sysdev_class_register(&s3c64xx_sysclass);
- return sysdev_register(&s3c64xx_sysdev);
++ subsys_system_register(&s3c64xx_subsys, NULL);
++ return device(&s3c64xx_dev);
+}
- core_initcall(s3c64xx_sysdev_init);
++core_initcall(s3c64xx_dev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+ /* add the timer sub-irqs */
+ s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
Content of type "application/pgp-signature" skipped
Powered by blists - more mailing lists