| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1325707287-31038-1-git-send-email-paul.gortmaker@windriver.com>
Date: Wed, 4 Jan 2012 15:01:27 -0500
From: Paul Gortmaker <paul.gortmaker@...driver.com>
To: alan@...ux.intel.com, gregkh@...e.de
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] serial: relocate remaining serial drivers from tty/ to tty/serial/
The commit ab4382d27412e7e3e7c936e8d50d8888dfac3df8,
"tty: move drivers/serial/ to drivers/tty/serial/"
put most of the serial drivers together in one place, but the ones
that were hiding in drivers/char didn't get picked up in that change.
They did get moved in commit a6afd9f3e819de4795fcd356e5bfad446e4323f2
"tty: move a number of tty drivers from drivers/char/ to drivers/tty/"
but there was no distinction of serial vs. non-serial in the above.
Here we take the remaining serial drivers (mostly legacy multiport
drivers) and put them alongside all the others in tty/serial/ dir.
We can drop SERIAL_NONSTANDARD's dependency on HAS_IOMEM, since the
encompassing menu block already has that dependency called out.
Signed-off-by: Paul Gortmaker <paul.gortmaker@...driver.com>
---
drivers/tty/Kconfig | 129 --------------------------------
drivers/tty/Makefile | 9 --
drivers/tty/serial/Kconfig | 128 +++++++++++++++++++++++++++++++
drivers/tty/serial/Makefile | 11 +++
drivers/tty/{ => serial}/amiserial.c | 0
drivers/tty/{ => serial}/cyclades.c | 0
drivers/tty/{ => serial}/isicom.c | 0
drivers/tty/{ => serial}/moxa.c | 0
drivers/tty/{ => serial}/moxa.h | 0
drivers/tty/{ => serial}/mxser.c | 0
drivers/tty/{ => serial}/mxser.h | 0
drivers/tty/{ => serial}/rocket.c | 0
drivers/tty/{ => serial}/rocket.h | 0
drivers/tty/{ => serial}/rocket_int.h | 0
drivers/tty/{ => serial}/synclink.c | 0
drivers/tty/{ => serial}/synclink_gt.c | 0
drivers/tty/{ => serial}/synclinkmp.c | 0
17 files changed, 139 insertions(+), 138 deletions(-)
rename drivers/tty/{ => serial}/amiserial.c (100%)
rename drivers/tty/{ => serial}/cyclades.c (100%)
rename drivers/tty/{ => serial}/isicom.c (100%)
rename drivers/tty/{ => serial}/moxa.c (100%)
rename drivers/tty/{ => serial}/moxa.h (100%)
rename drivers/tty/{ => serial}/mxser.c (100%)
rename drivers/tty/{ => serial}/mxser.h (100%)
rename drivers/tty/{ => serial}/rocket.c (100%)
rename drivers/tty/{ => serial}/rocket.h (100%)
rename drivers/tty/{ => serial}/rocket_int.h (100%)
rename drivers/tty/{ => serial}/synclink.c (100%)
rename drivers/tty/{ => serial}/synclink_gt.c (100%)
rename drivers/tty/{ => serial}/synclinkmp.c (100%)
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index b3d1741..fe9bf59 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -164,125 +164,6 @@ config BFIN_JTAG_COMM_CONSOLE
bool "Console on Blackfin JTAG"
depends on BFIN_JTAG_COMM=y
-config SERIAL_NONSTANDARD
- bool "Non-standard serial port support"
- depends on HAS_IOMEM
- ---help---
- Say Y here if you have any non-standard serial boards -- boards
- which aren't supported using the standard "dumb" serial driver.
- This includes intelligent serial boards such as Cyclades,
- Digiboards, etc. These are usually used for systems that need many
- serial ports because they serve many terminals or dial-in
- connections.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about non-standard serial boards.
-
- Most people can say N here.
-
-config ROCKETPORT
- tristate "Comtrol RocketPort support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- help
- This driver supports Comtrol RocketPort and RocketModem PCI boards.
- These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
- modems. For information about the RocketPort/RocketModem boards
- and this driver read <file:Documentation/serial/rocket.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called rocket.
-
- If you want to compile this driver into the kernel, say Y here. If
- you don't have a Comtrol RocketPort/RocketModem card installed, say N.
-
-config CYCLADES
- tristate "Cyclades async mux support"
- depends on SERIAL_NONSTANDARD && (PCI || ISA)
- select FW_LOADER
- ---help---
- This driver supports Cyclades Z and Y multiserial boards.
- You would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- For information about the Cyclades-Z card, read
- <file:Documentation/serial/README.cycladesZ>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyclades.
-
- If you haven't heard about it, it's safe to say N.
-
-config CYZ_INTR
- bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CYCLADES
- help
- The Cyclades-Z family of multiport cards allows 2 (two) driver op
- modes: polling and interrupt. In polling mode, the driver will check
- the status of the Cyclades-Z ports every certain amount of time
- (which is called polling cycle and is configurable). In interrupt
- mode, it will use an interrupt line (IRQ) in order to check the
- status of the Cyclades-Z ports. The default op mode is polling. If
- unsure, say N.
-
-config MOXA_INTELLIO
- tristate "Moxa Intellio support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- select FW_LOADER
- help
- Say Y here if you have a Moxa Intellio multiport serial card.
-
- To compile this driver as a module, choose M here: the
- module will be called moxa.
-
-config MOXA_SMARTIO
- tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
- help
- Say Y here if you have a Moxa SmartIO multiport serial card and/or
- want to help develop a new version of this driver.
-
- This is upgraded (1.9.1) driver from original Moxa drivers with
- changes finally resulting in PCI probing.
-
- This driver can also be built as a module. The module will be called
- mxser. If you want to do that, say M here.
-
-config SYNCLINK
- tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
- help
- Provides support for the SyncLink ISA and PCI multiprotocol serial
- adapters. These adapters support asynchronous and HDLC bit
- synchronous communication up to 10Mbps (PCI adapter).
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink. If you want to do that, say M
- here.
-
-config SYNCLINKMP
- tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Enable support for the SyncLink Multiport (2 or 4 ports)
- serial adapter, running asynchronous and HDLC communications up
- to 2.048Mbps. Each ports is independently selectable for
- RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclinkmp. If you want to do that, say M
- here.
-
-config SYNCLINK_GT
- tristate "SyncLink GT/AC support"
- depends on SERIAL_NONSTANDARD && PCI
- help
- Support for SyncLink GT and SyncLink AC families of
- synchronous and asynchronous serial adapters
- manufactured by Microgate Systems, Ltd. (www.microgate.com)
-
config NOZOMI
tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
depends on PCI && EXPERIMENTAL
@@ -293,16 +174,6 @@ config NOZOMI
To compile this driver as a module, choose M here, the module
will be called nozomi.
-config ISI
- tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD && PCI
- select FW_LOADER
- help
- This is a driver for the Multi-Tech cards which provide several
- serial ports. The driver is experimental and can currently only be
- built as a module. The module will be called isicom.
- If you want to do that, choose M here.
-
config N_HDLC
tristate "HDLC line discipline support"
depends on SERIAL_NONSTANDARD
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index 2953059..b5ce64b 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -15,17 +15,8 @@ obj-$(CONFIG_HVC_DRIVER) += hvc/
obj-y += serial/
# tty drivers
-obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_BFIN_JTAG_COMM) += bfin_jtag_comm.o
-obj-$(CONFIG_CYCLADES) += cyclades.o
-obj-$(CONFIG_ISI) += isicom.o
-obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
-obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
obj-$(CONFIG_NOZOMI) += nozomi.o
-obj-$(CONFIG_ROCKETPORT) += rocket.o
-obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
-obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
-obj-$(CONFIG_SYNCLINK) += synclink.o
obj-$(CONFIG_PPC_EPAPR_HV_BYTECHAN) += ehv_bytechan.o
obj-y += ipwireless/
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 925a1e5..ab117ad 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1610,4 +1610,132 @@ config SERIAL_XILINX_PS_UART_CONSOLE
help
Enable a Xilinx PS UART port to be the system console.
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/serial/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/serial/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
endmenu
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index e10cf5b..da4b608 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -94,3 +94,14 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
+obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
+
+# Stuff depending on SERIAL_NONSTANDARD; mostly legacy multiport cards.
+obj-$(CONFIG_CYCLADES) += cyclades.o
+obj-$(CONFIG_ISI) += isicom.o
+obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
+obj-$(CONFIG_MOXA_SMARTIO) += mxser.o
+obj-$(CONFIG_ROCKETPORT) += rocket.o
+obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o
+obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o
+obj-$(CONFIG_SYNCLINK) += synclink.o
diff --git a/drivers/tty/amiserial.c b/drivers/tty/serial/amiserial.c
similarity index 100%
rename from drivers/tty/amiserial.c
rename to drivers/tty/serial/amiserial.c
diff --git a/drivers/tty/cyclades.c b/drivers/tty/serial/cyclades.c
similarity index 100%
rename from drivers/tty/cyclades.c
rename to drivers/tty/serial/cyclades.c
diff --git a/drivers/tty/isicom.c b/drivers/tty/serial/isicom.c
similarity index 100%
rename from drivers/tty/isicom.c
rename to drivers/tty/serial/isicom.c
diff --git a/drivers/tty/moxa.c b/drivers/tty/serial/moxa.c
similarity index 100%
rename from drivers/tty/moxa.c
rename to drivers/tty/serial/moxa.c
diff --git a/drivers/tty/moxa.h b/drivers/tty/serial/moxa.h
similarity index 100%
rename from drivers/tty/moxa.h
rename to drivers/tty/serial/moxa.h
diff --git a/drivers/tty/mxser.c b/drivers/tty/serial/mxser.c
similarity index 100%
rename from drivers/tty/mxser.c
rename to drivers/tty/serial/mxser.c
diff --git a/drivers/tty/mxser.h b/drivers/tty/serial/mxser.h
similarity index 100%
rename from drivers/tty/mxser.h
rename to drivers/tty/serial/mxser.h
diff --git a/drivers/tty/rocket.c b/drivers/tty/serial/rocket.c
similarity index 100%
rename from drivers/tty/rocket.c
rename to drivers/tty/serial/rocket.c
diff --git a/drivers/tty/rocket.h b/drivers/tty/serial/rocket.h
similarity index 100%
rename from drivers/tty/rocket.h
rename to drivers/tty/serial/rocket.h
diff --git a/drivers/tty/rocket_int.h b/drivers/tty/serial/rocket_int.h
similarity index 100%
rename from drivers/tty/rocket_int.h
rename to drivers/tty/serial/rocket_int.h
diff --git a/drivers/tty/synclink.c b/drivers/tty/serial/synclink.c
similarity index 100%
rename from drivers/tty/synclink.c
rename to drivers/tty/serial/synclink.c
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/serial/synclink_gt.c
similarity index 100%
rename from drivers/tty/synclink_gt.c
rename to drivers/tty/serial/synclink_gt.c
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/serial/synclinkmp.c
similarity index 100%
rename from drivers/tty/synclinkmp.c
rename to drivers/tty/serial/synclinkmp.c
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists