| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <4F053BCF.7030600@samsung.com>
Date: Thu, 05 Jan 2012 14:57:35 +0900
From: Donggeun Kim <dg77.kim@...sung.com>
To: Amit Kachhap <amit.kachhap@...aro.org>
Cc: guenter.roeck@...csson.com,
"linux-pm@...ts.linux-foundation.org"
<linux-pm@...ts.linux-foundation.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
"linaro-dev@...ts.linaro.org" <linaro-dev@...ts.linaro.org>,
"patches@...aro.org" <patches@...aro.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"lm-sensors@...sensors.org" <lm-sensors@...sensors.org>,
"linux-acpi@...r.kernel.org" <linux-acpi@...r.kernel.org>,
"lenb@...nel.org" <lenb@...nel.org>
Subject: Re: [lm-sensors] [RFC PATCH 2/3] thermal: exynos4: Register the tmu
sensor with the thermal interface layer
Actually, the TMU driver is closely related to thermal layer.
I think it's okay to move it to the thermal.
Thanks.
-Donggeun
On 2012년 01월 04일 19:14, Amit Kachhap wrote:
> Hi Guenter,
>
> The main idea of this work is to leave the current userspace based
> notification scheme and add the kernel based cooling scheme on top of
> it. Anyway, It is a good idea to move the file hwmon/exynos4_tmu.c as
> this creates 2 hwmon entries.
> Adding CC: Donggeun Kim to know his opinion.
>
> Thanks,
> Amit Daniel
>
> On 4 January 2012 03:55, Guenter Roeck <guenter.roeck@...csson.com> wrote:
>> On Wed, 2011-12-21 at 06:59 -0500, Amit Daniel Kachhap wrote:
>>> Export and register information from the hwmon tmu sensor to the samsung
>>> exynos kernel thermal framework where different cooling devices and thermal
>>> zone are binded. The exported information is based according to the data
>>> structure thermal_sensor_conf present in exynos_thermal.h. HWMON sysfs
>>> functions are currently left although all of them are present in generic
>>> linux thermal layer.
>>> Also the platform data structure is modified to pass frequency cooling
>>> in percentages for each thermal level.
>>>
>> Hi Amit,
>>
>> wouldn't it make more sense to merge the code as necessary from
>> hwmon/exynos4_tmu.c into the new thermal/exynos_thermal.c, and drop
>> hwmon/exynos4_tmu.c entirely ?
>>
>> With that, you should get the hwmon entries for free, and we would not
>> have to maintain two drivers with overlapping functionality.
>>
>> Thanks,
>> Guenter
>>
>>> Signed-off-by: Amit Daniel Kachhap <amit.kachhap@...aro.org>
>>> ---
>>> drivers/hwmon/exynos4_tmu.c | 34 ++++++++++++++++++++++++++--
>>> include/linux/platform_data/exynos4_tmu.h | 7 ++++++
>>> 2 files changed, 38 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
>>> index f2359a0..6912a7f 100644
>>> --- a/drivers/hwmon/exynos4_tmu.c
>>> +++ b/drivers/hwmon/exynos4_tmu.c
>>> @@ -37,6 +37,9 @@
>>> #include <linux/hwmon-sysfs.h>
>>>
>>> #include <linux/platform_data/exynos4_tmu.h>
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> +#include <linux/exynos_thermal.h>
>>> +#endif
>>>
>>> #define EXYNOS4_TMU_REG_TRIMINFO 0x0
>>> #define EXYNOS4_TMU_REG_CONTROL 0x20
>>> @@ -248,10 +251,13 @@ static void exynos4_tmu_work(struct work_struct *work)
>>>
>>> kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
>>>
>>> - enable_irq(data->irq);
>>>
>>> clk_disable(data->clk);
>>> mutex_unlock(&data->lock);
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> + exynos4_report_trigger();
>>> +#endif
>>> + enable_irq(data->irq);
>>> }
>>>
>>> static irqreturn_t exynos4_tmu_irq(int irq, void *id)
>>> @@ -345,6 +351,14 @@ static const struct attribute_group exynos4_tmu_attr_group = {
>>> .attrs = exynos4_tmu_attributes,
>>> };
>>>
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> +static struct thermal_sensor_conf exynos4_sensor_conf = {
>>> + .name = "exynos4-therm",
>>> + .read_temperature = (int (*)(void *))exynos4_tmu_read,
>>> +};
>>> +#endif
>>> +/*CONFIG_SAMSUNG_THERMAL_INTERFACE*/
>>> +
>>> static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
>>> {
>>> struct exynos4_tmu_data *data;
>>> @@ -432,9 +446,20 @@ static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
>>> }
>>>
>>> exynos4_tmu_control(pdev, true);
>>> -
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> + (&exynos4_sensor_conf)->private_data = data;
>>> + (&exynos4_sensor_conf)->sensor_data = pdata;
>>> + ret = exynos4_register_thermal(&exynos4_sensor_conf);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "Failed to register thermal interface\n");
>>> + goto err_hwmon_device;
>>> + }
>>> +#endif
>>> return 0;
>>> -
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> +err_hwmon_device:
>>> + hwmon_device_unregister(data->hwmon_dev);
>>> +#endif
>>> err_create_group:
>>> sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
>>> err_clk:
>>> @@ -458,6 +483,9 @@ static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
>>>
>>> exynos4_tmu_control(pdev, false);
>>>
>>> +#ifdef CONFIG_SAMSUNG_THERMAL_INTERFACE
>>> + exynos4_unregister_thermal();
>>> +#endif
>>> hwmon_device_unregister(data->hwmon_dev);
>>> sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
>>>
>>> diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h
>>> index 39e038c..642c508 100644
>>> --- a/include/linux/platform_data/exynos4_tmu.h
>>> +++ b/include/linux/platform_data/exynos4_tmu.h
>>> @@ -21,6 +21,7 @@
>>>
>>> #ifndef _LINUX_EXYNOS4_TMU_H
>>> #define _LINUX_EXYNOS4_TMU_H
>>> +#include <linux/cpu_cooling.h>
>>>
>>> enum calibration_type {
>>> TYPE_ONE_POINT_TRIMMING,
>>> @@ -64,6 +65,9 @@ enum calibration_type {
>>> * in the positive-TC generator block
>>> * 0 <= reference_voltage <= 31
>>> * @cal_type: calibration type for temperature
>>> + * @freq_pctg_table: Table representing frequency reduction percentage.
>>> + * @freq_tab_count: Count of the above table as frequency reduction may
>>> + * applicable to only some of the trigger levels.
>>> *
>>> * This structure is required for configuration of exynos4_tmu driver.
>>> */
>>> @@ -79,5 +83,8 @@ struct exynos4_tmu_platform_data {
>>> u8 reference_voltage;
>>>
>>> enum calibration_type cal_type;
>>> +
>>> + struct freq_pctg_table freq_tab[4];
>>> + unsigned int freq_tab_count;
>>> };
>>> #endif /* _LINUX_EXYNOS4_TMU_H */
>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists