[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4F05EDF0.6040007@amd.com>
Date: Thu, 5 Jan 2012 13:37:36 -0500
From: Boris Ostrovsky <boris.ostrovsky@....com>
To: Marcelo Tosatti <mtosatti@...hat.com>
CC: Boris Ostrovsky <ostr@...64.org>, <avi@...hat.com>,
<joerg.roedel@....com>, <kvm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] KVM: SVM: Add support for AMD's OSVW feature in guests
On 01/05/12 06:20, Marcelo Tosatti wrote:
> On Tue, Jan 03, 2012 at 11:38:13PM -0500, Boris Ostrovsky wrote:
>>
>> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
>> index e32243e..b19769d 100644
>> --- a/arch/x86/kvm/svm.c
>> +++ b/arch/x86/kvm/svm.c
>> @@ -110,6 +110,13 @@ struct nested_state {
>> #define MSRPM_OFFSETS 16
>> static u32 msrpm_offsets[MSRPM_OFFSETS] __read_mostly;
>>
>> +/*
>> + * Set osvw_len to higher value when updated Revision Guides
>> + * are published and we know what the new status bits are
>> + */
>> +static uint64_t osvw_len = 4, osvw_status;
>> +static DEFINE_SPINLOCK(svm_lock);
>
> No need for this lock, operation already serialized by kvm_lock.
Will remove the lock.
>
>> struct vcpu_svm {
>> struct kvm_vcpu vcpu;
>> struct vmcb *vmcb;
>> @@ -556,6 +563,20 @@ static void svm_init_erratum_383(void)
>> erratum_383_found = true;
>> }
>>
>> +static void svm_init_osvw(struct kvm_vcpu *vcpu)
>> +{
>> + /*
>> + * Guests should see errata 400 and 415 as fixed (assuming that
>> + * HLT and IO instructions are intercepted).
>> + */
>> + vcpu->arch.osvw.length = (osvw_len>= 3) ? (osvw_len) : 3;
>> + vcpu->arch.osvw.status = osvw_status& ~(6ULL);
>
> Do you really want to expose the hosts osvw_status and osvw_len? If
> only exposure of 400 and 415 as fixed is necessary, then dealing with
> migration is simpler (that is, you control what workarounds are applied
> in the guest instead of making it dependent on particular hosts).
I do think we should (selectively) expose osvw information to the host.
As of today we have 4 errata described by these bits. Two of them (400
and 415) don't need to be seen by the guest and the patch would mask
them off. As for the other two (errata 383 and 298) --- the guest should
be aware of them and the patch passes them through.
Since osvw_len is initialized to 4 and cannot become larger no other
bits will be passed to guests until we update the initial value (by a
future patch).
If we are concerned about migration we can always ovewrite
vcpu->arch.osvw registers from userspace when creating a guest.
>
>> + /* Mark erratum 298 as present */
>> + if (osvw_len == 0&& boot_cpu_data.x86 == 0x10)
>> + vcpu->arch.osvw.status |= 1;
>> +}
>
> Why is it necessary to explicitly do this? Please add documentation.
That's because we may have bumped vcpu->arch.osvw.length to 3 in order
to signal the guest that 400 and 415 are fixed. By doing this we are
also telling the guest that it can rely on state of bit0.
If we leave bit0 as 0 the guest will assume that 298 is fixed. However,
if host's osvw_length is 0 it means that the physical HW *may* still be
affected. So we take conservative approach and tell the guest that it
should work around 298.
I'll add a comment to that effect.
>
>> + case MSR_AMD64_OSVW_ID_LENGTH:
>> + if (!guest_cpuid_has_osvw(vcpu))
>> + return 1;
>> + vcpu->arch.osvw.length = data;
>> + break;
>> + case MSR_AMD64_OSVW_STATUS:
>> + if (!guest_cpuid_has_osvw(vcpu))
>> + return 1;
>> + vcpu->arch.osvw.status = data;
>> + break;
>
> If writes are allowed, it is necessary to migrate this.
Not sure I understand what you mean here. Isn't vcpu->arch state
migrated with the guest?
Thanks.
-boris
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists