Message-ID: <4F05F073.2050209@redhat.com>
Date:	Thu, 05 Jan 2012 13:48:19 -0500
From:	Don Dutile <ddutile@...hat.com>
To:	Yanfei Wang <backyes@...il.com>
CC:	James Bottomley <James.Bottomley@...senpartnership.com>,
	Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
	linux-pci@...r.kernel.org, linux-arch@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: 【Question】Whether it's legal to enable same physical DMA memory mapped for different NIC device?

On 01/05/2012 07:40 AM, Yanfei Wang wrote:
> On Wed, Jan 4, 2012 at 11:59 PM, James Bottomley
> <James.Bottomley@...senpartnership.com>  wrote:
>> On Wed, 2012-01-04 at 10:44 +0800, Yanfei Wang wrote:
>>> On Wed, Jan 4, 2012 at 4:33 AM, Konrad Rzeszutek Wilk
>>> <konrad.wilk@...cle.com>  wrote:
>>>> On Wed, Dec 07, 2011 at 10:16:40PM +0800, ustc.mail wrote:
>>>>> Dear all,
>>>>>
>>>>> In NIC driver, to eliminate the  overhead of dma_map_single() for DMA
>>>>> packet data,  we have statically allocated huge DMA memory buffer ring
>>>>> at once instead of calling dma_map_single() per packet.  Considering
>>>>> to further reduce the copy overhead between different NIC(port) ring
>>>>> while forwarding, one packet from a input NIC(port) will be
>>>>> transferred to output NIC(port) with no any copy action.
>>>>>
>>>>> To satisfy this requirement, the packet memory should be mapped into
>>>>> input port and unmapped when leaving input port, then mapped into
>>>>> output port and unmapped later.
>>>>>
>>>>> Whether it's legal to map the same DMA memory into input and output
>>>>> port simultaneously? If it's not, then the zero-copy for packet
>>>>> forwarding is not feasible?
>>>>>
>>>>
>>>> Did you ever a get a response about this?
>>> No.
>>
>> This is probably because no-one really understands what you're asking.
>> As far as mapping memory to PCI devices goes, it's the job of the bridge
>> (or the iommu which may or may not be part of the bridge).  A standard
>> iommu tends not to care about devices and functions, so a range once
>> mapped is available to everything behind the bridge.  A more secure
>> virtualisation based iommu (like the on in VT-D) does, and tends to map
>> ranges per device.  I know of none that map per device and function, but
>> maybe there are.
>>
>> Your question reads like you have a range of memory mapped to a PCI
>> device that you want to use for two different purposes, can you do this?
>> to which the answer is that a standard PCI bridge really doesn't care
>> and it all depends on the mechanics of the actual device.  The only
>> wrinkle might be if the two different purposes are on two separate PCI
>> functions of the device and the iommu does care.
>>
>>>>
>>>> Is the output/input port on a seperate device function? Or is it
>>>> just a specific MMIO BAR in your PCI device?
>>>>
>>> Platform: x86, intel nehalem 8Core NUMA, linux 2.6.39, 10G
>>> 82599NIC(two ports per NIC card);
>>> Function: Forwarding packets between different ports.
>>> Targets: Forwarding packets with Zero-Overhead, despite other obstacles.
> Besides hardware and OS presented above, more detailed descriptions as follows,
>
> When IXGBE driver do initialization, DMA Descriptors Ring Buffers are
> allocated statically and mapped as cache coherent. Instead of
> dynamically allocating skb buffers for packet data, to reduce the huge
> overhead from skb memory allocation, huge Packet data buffers are
> pre-allocated and mapped  when driver is loaded. The same strategy  is
> done for RX end and TX end.
> For simple packet forwarding application, one packet from RX should be
> replicated from kernel space to userspace, then copied TX end. Here,
> One packet at least, should be copied twice to accomplish forwarding.
> When doing high performance network application,  the copy action want
> to be reduced. If Zero-copy can be done, that's better. (May be you
> will find that Zero-copy will bring other obstacles, such as memory
> management overhead with high performance. We do not care about it
> temporally.)
> To achieve this goal, a alternative approach is that,  unmapping the
> packets buffer after receiving it from A device, then mapping this
> packet buffer to B device. We hope to reduce the two mapping
> operation, so one packet DMA buffer should be mapped to A device(NIC
> port) as well as B device simultaneously.
> Q: Can this come to ture? Is it legal for mmaping operation at this platform?
>
> Thanks.
>
> Yanfei
>
>
not if the two different devices (82599 VFs or PFs) are in different domains
(assigned to different ((kvm; Konrad:xen?) virtualization guests).
otherwise, I don't see why two devices can't have the same memory page
mapped for DMA use -- a mere matter of multi-device, shared memory utilization! ;-)


>>
>> This still doesn't really provide the information needed to elucidate
>> the question.
>>
>> James
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-arch" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists