| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1326147171-13752-10-git-send-email-arnd@arndb.de>
Date: Mon, 9 Jan 2012 22:12:49 +0000
From: Arnd Bergmann <arnd@...db.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, Olof Johansson <olof@...om.net>,
Russell King <linux@....linux.org.uk>,
<linux-arm-kernel@...ts.infradead.org>,
Arnd Bergmann <arnd@...db.de>
Subject: [GIT PULL 09/11] power management changes for omap and imx
A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.
The following changes since commit b1258a936802a0e49ab1832aa62b87b09443a086:
Merge branch 'next/drivers' into for-next3 (2012-01-09 17:08:21 +0000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git next/pm
Arnd Bergmann (3):
Merge branch 'imx/pm' of git://git.linaro.org/people/shawnguo/linux-2.6 into imx6/pm
Merge branch 'v3.2-rc7' into next/pm
Merge branch 'imx6/pm' into next/pm
Deepak K (1):
ARM: OMAP2+: UART: Allow UART parameters to be configured from board file.
Eric Miao (2):
ARM: imx6q: build pm code only when CONFIG_PM selected
ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
Govindraj R (1):
ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
Govindraj.R (19):
ARM: OMAP2+: UART: cleanup + remove uart pm specific API
ARM: OMAP2+: UART: cleanup 8250 console driver support
ARM: OMAP2+: UART: Cleanup part of clock gating mechanism for uart
ARM: OMAP2+: UART: Add default mux for all uarts.
ARM: OMAP2+: UART: Remove mapbase/membase fields from pdata.
ARM: OMAP2+: UART: Add runtime pm support for omap-serial driver
ARM: OMAP2+: UART: Remove context_save and move context restore to driver
ARM: OMAP2+: UART: Ensure all reg values configured are available from port structure
ARM: OMAP2+: UART: Remove uart reset function.
ARM: OMAP2+: UART: Get context loss count to context restore
ARM: OMAP2+: UART: Move errata handling from serial.c to omap-serial
ARM: OMAP2+: UART: Add wakeup mechanism for omap-uarts
ARM: OMAP2+: UART: Remove old and unused clocks handling funcs
ARM: OMAP2+: UART: remove temporary variable used to count uart instance
ARM: OMAP2+: UART: Avoid console uart idling during bootup
ARM: OMAP2+: UART: Avoid uart idling on suspend for no_console_suspend usecase
ARM: OMAP2+: UART: Do not gate uart clocks if used for debug_prints
ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos
ARM: OMAP2+: UART: Fix compilation/sparse warnings
Hui Wang (1):
ARM: mx5: use generic irq chip pm interface for pm functions on
Jon Hunter (1):
ARM: OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART
Olof Johansson (8):
Merge branch 'omap4' of git://git.kernel.org/.../tmlind/linux-omap into omap/omap4
Merge branch 'omap/omap4' into next/pm
Merge branch 'prcm' of git://git.kernel.org/.../tmlind/linux-omap into omap/prcm
Merge branch 'omap/prcm' into next/pm
Merge branch 'uart' of git://git.kernel.org/.../tmlind/linux-omap into omap/uart
Merge branch 'omap/uart' into next/pm
Merge branch 'imx/pm2' of git://git.linaro.org/people/shawnguo/linux-2.6 into imx6/pm
Merge branch 'imx6/pm' into next/pm
Paul Walmsley (2):
ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
Rajendra Nayak (5):
ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
omap-serial: Get rid of all pdev->id usage
omap-serial: Use default clock speed (48Mhz) if not specified
omap-serial: Add minimal device tree support
ARM: omap: pass minimal SoC/board data for UART from dt
Santosh Shilimkar (24):
ARM: OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit
ARM: OMAP4: Export omap4_get_base*() rather than global address pointers
ARM: OMAP4: PM: Add SAR RAM support
ARM: OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3/L4 and DUCATI-L3
ARM: OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0
ARM: OMAP4: PM: Initialise all the clockdomains to supported states
ARM: OMAP: Add Secure HAL and monitor mode API infrastructure.
ARM: OMAP: PM: Add support to allocate the memory for secure RAM
ARM: OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn
ARM: OMAP4: PM: Add CPUX OFF mode support
ARM: OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug.
ARM: OMAP4: PM: Program CPU1 to hit OFF when off-lined
ARM: OMAP4: PM: CPU1 wakeup workaround from Low power modes
ARM: OMAP4: PM: Use custom omap_do_wfi() for default idle.
ARM: OMAP4: suspend: Add MPUSS power domain RETENTION support
ARM: OMAP4: Remove un-used do_wfi() macro.
ARM: OMAP4: PM: Add WakeupGen and secure GIC low power support
ARM: OMAP4: PM: Add L2X0 cache lowpower support
ARM: OMAP4: PM: Add MPUSS power domain OSWR support
ARM: OMAP4: PM: Add power domain statistics support
ARM: OMAP4: Fix errata i688 with MPU interconnect barriers.
ARM: OMAP4: PM: Add CPUidle support
ARM: OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states.
ARM: OMAP3: CPUidle: Make use of CPU PM notifiers
Shawn Guo (2):
ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
Tero Kristo (6):
ARM: OMAP: PRCM: add support for chain interrupt handler
ARM: OMAP: PRCM: add suspend prepare / finish support
ARM: OMAP2+: mux: add support for PAD wakeup interrupts
ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
ARM: OMAP3: pm: use prcm chain handler
ARM: OMAP4: PRM: use PRCM interrupt handler
Tony Lindgren (4):
Merge branch 'for_3.3/pm/omap4-mpuss' of git://git.kernel.org/.../khilman/linux-omap-pm into omap4
Merge branch 'tk_prm_chain_handler_devel_3.3' of git://git.pwsan.com/linux-2.6 into prcm
Merge branch 'for_3.3/uart/runtime-pm' of git://git.kernel.org/.../khilman/linux-omap-pm into uart
arm/dts: Add minimal device tree support for omap2420 and omap2430
.../devicetree/bindings/serial/omap_serial.txt | 10 +
arch/arm/boot/dts/omap2.dtsi | 67 ++
arch/arm/boot/dts/omap3.dtsi | 31 +
arch/arm/boot/dts/omap4.dtsi | 28 +
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/Makefile | 6 +-
arch/arm/mach-imx/head-v7.S | 17 +-
arch/arm/mach-imx/pm-imx6q.c | 2 +
arch/arm/mach-mx5/mm.c | 19 +-
arch/arm/mach-mx5/system.c | 3 -
arch/arm/mach-omap2/Kconfig | 21 +
arch/arm/mach-omap2/Makefile | 19 +-
arch/arm/mach-omap2/board-3430sdp.c | 100 +---
arch/arm/mach-omap2/board-4430sdp.c | 68 +--
arch/arm/mach-omap2/board-generic.c | 1 -
arch/arm/mach-omap2/board-n8x0.c | 6 +-
arch/arm/mach-omap2/board-omap4panda.c | 68 +--
arch/arm/mach-omap2/common.h | 64 ++-
arch/arm/mach-omap2/cpuidle34xx.c | 21 +-
arch/arm/mach-omap2/cpuidle44xx.c | 245 ++++++
arch/arm/mach-omap2/include/mach/barriers.h | 31 +
arch/arm/mach-omap2/include/mach/omap-secure.h | 57 ++
arch/arm/mach-omap2/include/mach/omap-wakeupgen.h | 39 +
arch/arm/mach-omap2/io.c | 9 +
arch/arm/mach-omap2/mux.c | 89 ++-
arch/arm/mach-omap2/omap-headsmp.S | 5 -
arch/arm/mach-omap2/omap-hotplug.c | 14 +-
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 398 +++++++++
arch/arm/mach-omap2/omap-secure.c | 81 ++
arch/arm/mach-omap2/omap-smc.S | 80 ++
arch/arm/mach-omap2/omap-smp.c | 45 +
arch/arm/mach-omap2/omap-wakeupgen.c | 389 +++++++++
arch/arm/mach-omap2/omap4-common.c | 94 ++-
arch/arm/mach-omap2/omap4-sar-layout.h | 50 ++
arch/arm/mach-omap2/omap44xx-smc.S | 57 --
arch/arm/mach-omap2/omap_hwmod.c | 125 +++-
arch/arm/mach-omap2/pm.h | 1 +
arch/arm/mach-omap2/pm24xx.c | 20 -
arch/arm/mach-omap2/pm34xx.c | 158 +---
arch/arm/mach-omap2/pm44xx.c | 153 ++++-
arch/arm/mach-omap2/prcm-common.h | 75 ++-
arch/arm/mach-omap2/prm2xxx_3xxx.c | 97 ++-
arch/arm/mach-omap2/prm2xxx_3xxx.h | 9 +-
arch/arm/mach-omap2/prm44xx.c | 116 +++
arch/arm/mach-omap2/prm44xx.h | 8 +-
arch/arm/mach-omap2/prm_common.c | 320 +++++++
arch/arm/mach-omap2/serial.c | 907 ++++++--------------
arch/arm/mach-omap2/sleep44xx.S | 379 ++++++++
arch/arm/plat-mxc/include/mach/common.h | 8 +-
arch/arm/plat-mxc/include/mach/mxc.h | 2 +-
arch/arm/plat-mxc/tzic.c | 40 +-
arch/arm/plat-omap/common.c | 3 +
arch/arm/plat-omap/include/plat/omap-secure.h | 13 +
arch/arm/plat-omap/include/plat/omap-serial.h | 37 +-
arch/arm/plat-omap/include/plat/omap44xx.h | 1 +
arch/arm/plat-omap/include/plat/omap_hwmod.h | 6 +
arch/arm/plat-omap/include/plat/serial.h | 10 +-
arch/arm/plat-omap/include/plat/sram.h | 6 +-
arch/arm/plat-omap/sram.c | 8 +
drivers/tty/serial/omap-serial.c | 428 ++++++++--
60 files changed, 3928 insertions(+), 1237 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists