lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1326414530-10789-2-git-send-email-andi@firstfloor.org>
Date:	Thu, 12 Jan 2012 16:28:48 -0800
From:	Andi Kleen <andi@...stfloor.org>
To:	chris.mason@...cle.com
Cc:	linux-kernel@...r.kernel.org, linux-btrfs@...r.kernel.org,
	Andi Kleen <ak@...ux.intel.com>
Subject: [PATCH 1/3] Add the snappy-c compressor to lib v2

From: Andi Kleen <ak@...ux.intel.com>

This is a C port of the google snappy compressor. It has roughly
comparable compression to LZO, but is significantly faster on many file
types. For example it beats all other compressors on already
compressed data.

I ported the original C++ code over to C and did some changes
to make it better fit into the kernel. It preallocates the worst
case memory consumption now. While the code being larger
than lzo it is still reasonable (about 5K on x86).

Decompression needs very little memory, Compression
currently 192K on 64bit and 128K on 32bit. For comparison
LZO compression needs 128K on 64bit and 64K on 32bit.

[This could be lowered significantly by not preallocating
for most use cases, typically the footprint is much lower.
The original C++ version only allocated most of this
when (rarely) needed, but this is more problematic in the kernel]

There are some minor divergences from the Linux coding standards:
in particular I kept the C++/C99 style mixed statement/declarations.
This was mainly to not diverge too much from the reference C++
source, so that improvements from there can be easily ported.
There are some other left overs from the google style, but very
little now.

Performance:

The compressor performs best on 64bit-LE systems,
but is also quite good on 32bit. I haven't tested BE, but
I don't expect that to add a lot of overhead.

Here is some performance data (32bit, Nehalem):
c/b = cycles/byte; lower numbers are better.

x86-64 executable: (compression minimally slower than qlz, but
much better at decompression, lzo is left in the dust):

snappy: emacs-gtk: 11007968 b: ratio 0.38: comp 8.13 uncomp 2.65 c/b
lzo   : emacs-gtk: 11007968 b: ratio 0.33: comp 12.74 uncomp 4.70 c/b
zlib1 : emacs-gtk: 11007968 b: ratio 0.27: comp 49.96 uncomp 13.14 c/b
zlib3 : emacs-gtk: 11007968 b: ratio 0.26: comp 64.17 uncomp 12.33 c/b
lzf   : emacs-gtk: 11007968 b: ratio 0.37: comp 9.85 uncomp 4.33 c/b
qlz   : emacs-gtk: 11007968 b: ratio 0.34: comp 7.51 uncomp 6.28 c/b
fastlz: emacs-gtk: 11007968 b: ratio 0.37: comp 10.73 uncomp 4.97 c/b

Compressed data (beats everything else):

snappy: udev-151.tar.gz: 634842 b: ratio 1.00: comp 0.99 uncomp 0.33 c/b
lzo   : udev-151.tar.gz: 634842 b: ratio 1.00: comp 41.44 uncomp 0.66 c/b
zlib1 : udev-151.tar.gz: 634842 b: ratio 1.00: comp 116.99 uncomp 3.94 c/b
zlib3 : udev-151.tar.gz: 634842 b: ratio 1.00: comp 117.68 uncomp 3.94 c/b
lzf   : udev-151.tar.gz: 634842 b: ratio 1.03: comp 16.32 uncomp 1.14 c/b
qlz   : udev-151.tar.gz: 634842 b: ratio 1.00: comp 10.42 uncomp 0.42 c/b
fastlz: udev-151.tar.gz: 634842 b: ratio 1.03: comp 19.35 uncomp 2.07 c/b

Text file (compression somewhat slower than qlz, but decompression
much better, lzo is much worse):

snappy: manual.txt: 445343 b: ratio 0.47: comp 12.01 uncomp 3.12 c/b
lzo   : manual.txt: 445343 b: ratio 0.44: comp 16.32 uncomp 7.53 c/b
zlib1 : manual.txt: 445343 b: ratio 0.35: comp 56.37 uncomp 15.59 c/b
zlib3 : manual.txt: 445343 b: ratio 0.31: comp 73.45 uncomp 13.99 c/b
lzf   : manual.txt: 445343 b: ratio 0.46: comp 13.43 uncomp 5.47 c/b
qlz   : manual.txt: 445343 b: ratio 0.44: comp 9.16 uncomp 8.19 c/b
fastlz: manual.txt: 445343 b: ratio 0.46: comp 14.22 uncomp 7.28 c/b

As you can see snappy is a good all-around compressor.

On 64bit the compression is even faster and beats everything else easily:

snappy: emacs-gtk: 11007968 b: ratio 0.38: comp 4.90 uncomp 2.65 c/b
lzo   : emacs-gtk: 11007968 b: ratio 0.33: comp 11.24 uncomp 4.46 c/b
zlib1 : emacs-gtk: 11007968 b: ratio 0.27: comp 41.67 uncomp 11.13 c/b
zlib3 : emacs-gtk: 11007968 b: ratio 0.26: comp 51.80 uncomp 10.54 c/b
lzf   : emacs-gtk: 11007968 b: ratio 0.37: comp 8.79 uncomp 4.05 c/b
qlz   : emacs-gtk: 11007968 b: ratio 0.34: comp 5.44 uncomp 5.46 c/b
fastlz: emacs-gtk: 11007968 b: ratio 0.37: comp 9.91 uncomp 4.77 c/b

On 64bit it's now nearly as fast as qlz on the text file too:

snappy: manual.txt: 445343 b: ratio 0.47: comp 7.79 uncomp 3.47 c/b
lzo   : manual.txt: 445343 b: ratio 0.44: comp 15.46 uncomp 7.27 c/b
zlib1 : manual.txt: 445343 b: ratio 0.35: comp 45.79 uncomp 12.78 c/b
zlib3 : manual.txt: 445343 b: ratio 0.31: comp 60.52 uncomp 11.72 c/b
lzf   : manual.txt: 445343 b: ratio 0.46: comp 12.62 uncomp 5.30 c/b
qlz   : manual.txt: 445343 b: ratio 0.44: comp 6.81 uncomp 7.65 c/b
fastlz: manual.txt: 445343 b: ratio 0.46: comp 13.75 uncomp 6.52 c/b

Overall it's a good alternative to lzo, with the only
drawback being the somewhat higher memory use.

v2: Some minor performance improvements and cleanups.
32bit compression should be a few percent faster now.
Signed-off-by: Andi Kleen <ak@...ux.intel.com>
---
 include/linux/snappy.h |   26 +
 lib/Kconfig            |    6 +
 lib/Makefile           |    4 +
 lib/snappy.c           | 1300 ++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 1336 insertions(+), 0 deletions(-)
 create mode 100644 include/linux/snappy.h
 create mode 100644 lib/snappy.c

diff --git a/include/linux/snappy.h b/include/linux/snappy.h
new file mode 100644
index 0000000..4119803
--- /dev/null
+++ b/include/linux/snappy.h
@@ -0,0 +1,26 @@
+#ifndef _LINUX_SNAPPY_H
+#define _LINUX_SNAPPY_H 1
+
+#include <linux/types.h>
+
+/* Only needed for compression. This preallocates the worst case */
+struct snappy_env {
+	u16 *hash_table;
+	void *scratch;
+	void *scratch_output;
+};
+
+int snappy_init_env(struct snappy_env *env);
+void snappy_free_env(struct snappy_env *env);
+bool snappy_uncompress(const char *compressed, size_t n, char *uncompressed);
+int snappy_compress(struct snappy_env *env,
+		    const char *input,
+		    size_t input_length,
+		    char *compressed,
+		    size_t *compressed_length);
+bool snappy_uncompressed_length(const char *buf, size_t len, size_t *result);
+size_t snappy_max_compressed_length(size_t source_len);
+
+
+
+#endif
diff --git a/lib/Kconfig b/lib/Kconfig
index 201e1b3..719e4f2 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -310,4 +310,10 @@ config DIGSIG
 	  Digital signature verification. Currently only RSA is supported.
 	  Implementation is done using GnuPG MPI library
 
+config SNAPPY
+       tristate "Snappy compressor"
+       help
+          Add the snappy compressor. This is a reasonable compressor that
+	  compresses and decompresses extremly fast.
+
 endmenu
diff --git a/lib/Makefile b/lib/Makefile
index dace162..2f5f86a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -121,6 +121,10 @@ obj-$(CONFIG_DQL) += dynamic_queue_limits.o
 obj-$(CONFIG_MPILIB) += mpi/
 obj-$(CONFIG_DIGSIG) += digsig.o
 
+CFLAGS_snappy.o += $(call cc-disable-warning, declaration-after-statement) \
+		   -DNDEBUG=1
+obj-$(CONFIG_SNAPPY) += snappy.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/snappy.c b/lib/snappy.c
new file mode 100644
index 0000000..0b39e07
--- /dev/null
+++ b/lib/snappy.c
@@ -0,0 +1,1300 @@
+/*
+ * C port of the snappy compressor from Google.
+ * This is a very fast compressor with comparable compression to lzo.
+ * Works best on 64bit little-endian, but should be good on others too.
+ * Ported by Andi Kleen.
+ * Based on snappy 1.0.3 plus some selected changes from SVN.
+ */
+
+/*
+ * Copyright 2005 Google Inc. All Rights Reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other materials provided with the
+ * distribution.
+ *     * Neither the name of Google Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/snappy.h>
+#include <asm/unaligned.h>
+
+#define CRASH_UNLESS(x) BUG_ON(!(x))
+#define CHECK(cond) CRASH_UNLESS(cond)
+#define CHECK_LE(a, b) CRASH_UNLESS((a) <= (b))
+#define CHECK_GE(a, b) CRASH_UNLESS((a) >= (b))
+#define CHECK_EQ(a, b) CRASH_UNLESS((a) == (b))
+#define CHECK_NE(a, b) CRASH_UNLESS((a) != (b))
+#define CHECK_LT(a, b) CRASH_UNLESS((a) < (b))
+#define CHECK_GT(a, b) CRASH_UNLESS((a) > (b))
+
+#define UNALIGNED_LOAD16(_p) get_unaligned((u16 *)(_p))
+#define UNALIGNED_LOAD32(_p) get_unaligned((u32 *)(_p))
+#define UNALIGNED_LOAD64(_p) get_unaligned((u64 *)(_p))
+
+#define UNALIGNED_STORE16(_p, _val) put_unaligned(_val, (u16 *)(_p))
+#define UNALIGNED_STORE32(_p, _val) put_unaligned(_val, (u32 *)(_p))
+#define UNALIGNED_STORE64(_p, _val) put_unaligned(_val, (u64 *)(_p))
+
+#ifdef NDEBUG
+
+#define DCHECK(cond) do {} while(0)
+#define DCHECK_LE(a, b) do {} while(0)
+#define DCHECK_GE(a, b) do {} while(0)
+#define DCHECK_EQ(a, b) do {} while(0)
+#define DCHECK_NE(a, b) do {} while(0)
+#define DCHECK_LT(a, b) do {} while(0)
+#define DCHECK_GT(a, b) do {} while(0)
+
+#else
+
+#define DCHECK(cond) CHECK(cond)
+#define DCHECK_LE(a, b) CHECK_LE(a, b)
+#define DCHECK_GE(a, b) CHECK_GE(a, b)
+#define DCHECK_EQ(a, b) CHECK_EQ(a, b)
+#define DCHECK_NE(a, b) CHECK_NE(a, b)
+#define DCHECK_LT(a, b) CHECK_LT(a, b)
+#define DCHECK_GT(a, b) CHECK_GT(a, b)
+
+#endif
+
+static inline bool is_little_endian(void)
+{
+#ifdef __LITTLE_ENDIAN__
+	return true;
+#endif
+	return false;
+}
+
+static inline int log2_floor(u32 n)
+{
+	return n == 0 ? -1 : 31 ^ __builtin_clz(n);
+}
+
+static inline int find_lsb_set_non_zero(u32 n)
+{
+	return __builtin_ctz(n);
+}
+
+static inline int find_lsb_set_non_zero64(u64 n)
+{
+	if (sizeof(long) == 4) {
+		if (n & 0xffffffff)
+			return __builtin_ctz(n & 0xffffffff);
+		return 32 + __builtin_ctz(n >> 32);
+	}
+	return __builtin_ctzll(n);
+}
+
+#define kmax32 5
+
+/*
+ * Attempts to parse a varint32 from a prefix of the bytes in [ptr,limit-1].
+ *  Never reads a character at or beyond limit.  If a valid/terminated varint32
+ * was found in the range, stores it in *OUTPUT and returns a pointer just
+ * past the last byte of the varint32. Else returns NULL.  On success,
+ * "result <= limit".
+ */
+static inline const char *varint_parse32_with_limit(const char *p,
+						    const char *l,
+						    u32 * OUTPUT)
+{
+	const unsigned char *ptr = (const unsigned char *)(p);
+	const unsigned char *limit = (const unsigned char *)(l);
+	u32 b, result;
+
+	if (ptr >= limit)
+		return NULL;
+	b = *(ptr++);
+	result = b & 127;
+	if (b < 128)
+		goto done;
+	if (ptr >= limit)
+		return NULL;
+	b = *(ptr++);
+	result |= (b & 127) << 7;
+	if (b < 128)
+		goto done;
+	if (ptr >= limit)
+		return NULL;
+	b = *(ptr++);
+	result |= (b & 127) << 14;
+	if (b < 128)
+		goto done;
+	if (ptr >= limit)
+		return NULL;
+	b = *(ptr++);
+	result |= (b & 127) << 21;
+	if (b < 128)
+		goto done;
+	if (ptr >= limit)
+		return NULL;
+	b = *(ptr++);
+	result |= (b & 127) << 28;
+	if (b < 16)
+		goto done;
+	return NULL;		/* Value is too long to be a varint32 */
+done:
+	*OUTPUT = result;
+	return (const char *)(ptr);
+}
+
+/*
+ * REQUIRES   "ptr" points to a buffer of length sufficient to hold "v".
+ *  EFFECTS    Encodes "v" into "ptr" and returns a pointer to the
+ *            byte just past the last encoded byte.
+ */
+static inline char *varint_encode32(char *sptr, u32 v)
+{
+	/* Operate on characters as unsigneds */
+	unsigned char *ptr = (unsigned char *)(sptr);
+	static const int B = 128;
+
+	if (v < (1 << 7)) {
+		*(ptr++) = v;
+	} else if (v < (1 << 14)) {
+		*(ptr++) = v | B;
+		*(ptr++) = v >> 7;
+	} else if (v < (1 << 21)) {
+		*(ptr++) = v | B;
+		*(ptr++) = (v >> 7) | B;
+		*(ptr++) = v >> 14;
+	} else if (v < (1 << 28)) {
+		*(ptr++) = v | B;
+		*(ptr++) = (v >> 7) | B;
+		*(ptr++) = (v >> 14) | B;
+		*(ptr++) = v >> 21;
+	} else {
+		*(ptr++) = v | B;
+		*(ptr++) = (v >> 7) | B;
+		*(ptr++) = (v >> 14) | B;
+		*(ptr++) = (v >> 21) | B;
+		*(ptr++) = v >> 28;
+	}
+	return (char *)(ptr);
+}
+
+struct source {
+	const char *ptr;
+	size_t left;
+};
+
+static inline int available(struct source *s)
+{
+	return s->left;
+}
+
+static inline const char *peek(struct source *s, size_t * len)
+{
+	*len = s->left;
+	return s->ptr;
+}
+
+static inline void skip(struct source *s, size_t n)
+{
+	s->left -= n;
+	s->ptr += n;
+}
+
+struct sink {
+	char *dest;
+};
+
+static inline void append(struct sink *s, const char *data, size_t n)
+{
+	if (data != s->dest)
+		memcpy(s->dest, data, n);
+	s->dest += n;
+}
+
+static inline void *sink_peek(struct sink *s, size_t n)
+{
+	return s->dest;
+}
+
+struct writer {
+	char *base;
+	char *op;
+	char *op_limit;
+};
+
+/* Called before decompression */
+static inline void writer_set_expected_length(struct writer *w, size_t len)
+{
+	w->op_limit = w->op + len;
+}
+
+/* Called after decompression */
+static inline bool writer_check_length(struct writer *w)
+{
+	return w->op == w->op_limit;
+}
+
+/*
+ * Copy "len" bytes from "src" to "op", one byte at a time.  Used for
+ *  handling COPY operations where the input and output regions may
+ * overlap.  For example, suppose:
+ *    src    == "ab"
+ *    op     == src + 2
+ *    len    == 20
+ * After IncrementalCopy(src, op, len), the result will have
+ * eleven copies of "ab"
+ *    ababababababababababab
+ * Note that this does not match the semantics of either memcpy()
+ * or memmove().
+ */
+static inline void incremental_copy(const char *src, char *op, int len)
+{
+	DCHECK_GT(len, 0);
+	do {
+		*op++ = *src++;
+	} while (--len > 0);
+}
+
+/*
+ * Equivalent to IncrementalCopy except that it can write up to ten extra
+ *  bytes after the end of the copy, and that it is faster.
+ *
+ * The main part of this loop is a simple copy of eight bytes at a time until
+ * we've copied (at least) the requested amount of bytes.  However, if op and
+ * src are less than eight bytes apart (indicating a repeating pattern of
+ * length < 8), we first need to expand the pattern in order to get the correct
+ * results. For instance, if the buffer looks like this, with the eight-byte
+ * <src> and <op> patterns marked as intervals:
+ *
+ *    abxxxxxxxxxxxx
+ *    [------]           src
+ *      [------]         op
+ *
+ * a single eight-byte copy from <src> to <op> will repeat the pattern once,
+ * after which we can move <op> two bytes without moving <src>:
+ *
+ *    ababxxxxxxxxxx
+ *    [------]           src
+ *        [------]       op
+ *
+ * and repeat the exercise until the two no longer overlap.
+ *
+ * This allows us to do very well in the special case of one single byte
+ * repeated many times, without taking a big hit for more general cases.
+ *
+ * The worst case of extra writing past the end of the match occurs when
+ * op - src == 1 and len == 1; the last copy will read from byte positions
+ * [0..7] and write to [4..11], whereas it was only supposed to write to
+ * position 1. Thus, ten excess bytes.
+ */
+
+#define kmax_increment_copy_overflow  10
+
+static inline void incremental_copy_fast_path(const char *src, char *op,
+					      int len)
+{
+	while (op - src < 8) {
+		UNALIGNED_STORE64(op, UNALIGNED_LOAD64(src));
+		len -= op - src;
+		op += op - src;
+	}
+	while (len > 0) {
+		UNALIGNED_STORE64(op, UNALIGNED_LOAD64(src));
+		src += 8;
+		op += 8;
+		len -= 8;
+	}
+}
+
+static inline bool writer_append_from_self(struct writer *w, u32 offset,
+					   u32 len)
+{
+	char *op = w->op;
+	const int space_left = w->op_limit - op;
+
+	if (op - w->base <= offset - 1u)	/* -1u catches offset==0 */
+		return false;
+	if (len <= 16 && offset >= 8 && space_left >= 16) {
+		/* Fast path, used for the majority (70-80%) of dynamic
+		 * invocations. */
+		UNALIGNED_STORE64(op, UNALIGNED_LOAD64(op - offset));
+		UNALIGNED_STORE64(op + 8, UNALIGNED_LOAD64(op - offset + 8));
+	} else {
+		if (space_left >= len + kmax_increment_copy_overflow) {
+			incremental_copy_fast_path(op - offset, op, len);
+		} else {
+			if (space_left < len) {
+				return false;
+			}
+			incremental_copy(op - offset, op, len);
+		}
+	}
+
+	w->op = op + len;
+	return true;
+}
+
+static inline bool writer_append(struct writer *w, const char *ip, u32 len,
+				 bool allow_fast_path)
+{
+	char *op = w->op;
+	const int space_left = w->op_limit - op;
+	if (allow_fast_path && len <= 16 && space_left >= 16) {
+		/* Fast path, used for the majority (about 90%) of dynamic
+		 * invocations. */
+		UNALIGNED_STORE64(op, UNALIGNED_LOAD64(ip));
+		UNALIGNED_STORE64(op + 8, UNALIGNED_LOAD64(ip + 8));
+	} else {
+		if (space_left < len)
+			return false;
+		memcpy(op, ip, len);
+	}
+	w->op = op + len;
+	return true;
+}
+
+/*
+ * Any hash function will produce a valid compressed bitstream, but a good
+ * hash function reduces the number of collisions and thus yields better
+ * compression for compressible input, and more speed for incompressible
+ * input. Of course, it doesn't hurt if the hash function is reasonably fast
+ * either, as it gets called a lot.
+ */
+static inline u32 hash_bytes(u32 bytes, int shift)
+{
+	u32 kmul = 0x1e35a7bd;
+	return (bytes * kmul) >> shift;
+}
+
+static inline u32 hash(const char *p, int shift)
+{
+	return hash_bytes(UNALIGNED_LOAD32(p), shift);
+}
+
+/*
+ * Compressed data can be defined as:
+ *    compressed := item* literal*
+ *    item       := literal* copy
+ *
+ * The trailing literal sequence has a space blowup of at most 62/60
+ * since a literal of length 60 needs one tag byte + one extra byte
+ * for length information.
+ *
+ * Item blowup is trickier to measure.  Suppose the "copy" op copies
+ * 4 bytes of data.  Because of a special check in the encoding code,
+ * we produce a 4-byte copy only if the offset is < 65536.  Therefore
+ * the copy op takes 3 bytes to encode, and this type of item leads
+ * to at most the 62/60 blowup for representing literals.
+ *
+ * Suppose the "copy" op copies 5 bytes of data.  If the offset is big
+ * enough, it will take 5 bytes to encode the copy op.  Therefore the
+ * worst case here is a one-byte literal followed by a five-byte copy.
+ * I.e., 6 bytes of input turn into 7 bytes of "compressed" data.
+ *
+ * This last factor dominates the blowup, so the final estimate is:
+ */
+size_t snappy_max_compressed_length(size_t source_len)
+{
+	return 32 + source_len + source_len / 6;
+}
+EXPORT_SYMBOL(snappy_max_compressed_length);
+
+enum {
+	LITERAL = 0,
+	COPY_1_BYTE_OFFSET = 1,	/* 3 bit length + 3 bits of offset in opcode */
+	COPY_2_BYTE_OFFSET = 2,
+	COPY_4_BYTE_OFFSET = 3
+};
+
+static inline char *emit_literal(char *op,
+				 const char *literal,
+				 int len, bool allow_fast_path)
+{
+	int n = len - 1;	/* Zero-length literals are disallowed */
+
+	if (n < 60) {
+		/* Fits in tag byte */
+		*op++ = LITERAL | (n << 2);
+
+/*
+ * The vast majority of copies are below 16 bytes, for which a
+ * call to memcpy is overkill. This fast path can sometimes
+ * copy up to 15 bytes too much, but that is okay in the
+ * main loop, since we have a bit to go on for both sides:
+ *
+ *   - The input will always have kInputMarginBytes = 15 extra
+ *     available bytes, as long as we're in the main loop, and
+ *     if not, allow_fast_path = false.
+ *   - The output will always have 32 spare bytes (see
+ *     MaxCompressedLength).
+ */
+		if (allow_fast_path && len <= 16) {
+			UNALIGNED_STORE64(op, UNALIGNED_LOAD64(literal));
+			UNALIGNED_STORE64(op + 8,
+					  UNALIGNED_LOAD64(literal + 8));
+			return op + len;
+		}
+	} else {
+		/* Encode in upcoming bytes */
+		char *base = op;
+		int count = 0;
+		op++;
+		while (n > 0) {
+			*op++ = n & 0xff;
+			n >>= 8;
+			count++;
+		}
+		DCHECK(count >= 1);
+		DCHECK(count <= 4);
+		*base = LITERAL | ((59 + count) << 2);
+	}
+	memcpy(op, literal, len);
+	return op + len;
+}
+
+static inline char *emit_copy_less_than64(char *op, int offset, int len)
+{
+	DCHECK_LE(len, 64);
+	DCHECK_GE(len, 4);
+	DCHECK_LT(offset, 65536);
+
+	if ((len < 12) && (offset < 2048)) {
+		int len_minus_4 = len - 4;
+		DCHECK(len_minus_4 < 8);	/* Must fit in 3 bits */
+		*op++ =
+		    COPY_1_BYTE_OFFSET | ((len_minus_4) << 2) | ((offset >> 8)
+								 << 5);
+		*op++ = offset & 0xff;
+	} else {
+		*op++ = COPY_2_BYTE_OFFSET | ((len - 1) << 2);
+		put_unaligned_le16(offset, op);
+		op += 2;
+	}
+	return op;
+}
+
+static inline char *emit_copy(char *op, int offset, int len)
+{
+	/*
+	 * Emit 64 byte copies but make sure to keep at least four bytes
+	 * reserved
+	 */
+	while (len >= 68) {
+		op = emit_copy_less_than64(op, offset, 64);
+		len -= 64;
+	}
+
+	/*
+	 * Emit an extra 60 byte copy if have too much data to fit in
+	 * one copy
+	 */
+	if (len > 64) {
+		op = emit_copy_less_than64(op, offset, 60);
+		len -= 60;
+	}
+
+	/* Emit remainder */
+	op = emit_copy_less_than64(op, offset, len);
+	return op;
+}
+
+/**
+ * snappy_uncompressed_length - return length of uncompressed output.
+ * @start: compressed buffer
+ * @n: length of compressed buffer.
+ * @result: Write the length of the uncompressed output here.
+ *
+ * Returns true when successfull, otherwise false.
+ */
+bool snappy_uncompressed_length(const char *start, size_t n, size_t * result)
+{
+	u32 v = 0;
+	const char *limit = start + n;
+	if (varint_parse32_with_limit(start, limit, &v) != NULL) {
+		*result = v;
+		return true;
+	} else {
+		return false;
+	}
+}
+EXPORT_SYMBOL(snappy_uncompressed_length);
+
+#define kblock_log 15
+#define kblock_size (1 << kblock_log)
+
+#define kmax_hash_table_bits 14
+#define kmax_hash_table_size (1 << kmax_hash_table_bits)
+
+/*
+ * Use smaller hash table when input.size() is smaller, since we
+ * fill the table, incurring O(hash table size) overhead for
+ * compression, and if the input is short, we won't need that
+ * many hash table entries anyway.
+ */
+static u16 *get_hash_table(struct snappy_env *env, size_t input_size,
+			      int *table_size)
+{
+	int htsize = 256;
+
+	DCHECK(kmax_hash_table_size >= 256);
+	while (htsize < kmax_hash_table_size && htsize < input_size)
+		htsize <<= 1;
+	CHECK_EQ(0, htsize & (htsize - 1));
+	CHECK_LE(htsize, kmax_hash_table_size);
+
+	u16 *table;
+	table = env->hash_table;
+
+	*table_size = htsize;
+	memset(table, 0, htsize * sizeof(*table));
+	return table;
+}
+
+/*
+ * Return the largest n such that
+ *
+ *   s1[0,n-1] == s2[0,n-1]
+ *   and n <= (s2_limit - s2).
+ *
+ * Does not read *s2_limit or beyond.
+ * Does not read *(s1 + (s2_limit - s2)) or beyond.
+ * Requires that s2_limit >= s2.
+ *
+ * Separate implementation for x86_64, for speed.  Uses the fact that
+ * x86_64 is little endian.
+ */
+#if defined(__LITTLE_ENDIAN__)
+static inline int find_match_length(const char *s1,
+				    const char *s2, const char *s2_limit)
+{
+	int matched = 0;
+
+	DCHECK_GE(s2_limit, s2);
+	/*
+	 * Find out how long the match is. We loop over the data 64 bits at a
+	 * time until we find a 64-bit block that doesn't match; then we find
+	 * the first non-matching bit and use that to calculate the total
+	 * length of the match.
+	 */
+	while (likely(s2 <= s2_limit - 8)) {
+		if (unlikely
+		    (UNALIGNED_LOAD64(s2) == UNALIGNED_LOAD64(s1 + matched))) {
+			s2 += 8;
+			matched += 8;
+		} else {
+			/*
+			 * On current (mid-2008) Opteron models there
+			 * is a 3% more efficient code sequence to
+			 * find the first non-matching byte.  However,
+			 * what follows is ~10% better on Intel Core 2
+			 * and newer, and we expect AMD's bsf
+			 * instruction to improve.
+			 */
+			u64 x =
+			    UNALIGNED_LOAD64(s2) ^ UNALIGNED_LOAD64(s1 +
+								    matched);
+			int matching_bits = find_lsb_set_non_zero64(x);
+			matched += matching_bits >> 3;
+			return matched;
+		}
+	}
+	while (likely(s2 < s2_limit)) {
+		if (likely(s1[matched] == *s2)) {
+			++s2;
+			++matched;
+		} else {
+			return matched;
+		}
+	}
+	return matched;
+}
+#else
+static inline int find_match_length(const char *s1,
+				    const char *s2, const char *s2_limit)
+{
+	/* Implementation based on the x86-64 version, above. */
+	DCHECK_GE(s2_limit, s2);
+	int matched = 0;
+
+	while (s2 <= s2_limit - 4 &&
+	       UNALIGNED_LOAD32(s2) == UNALIGNED_LOAD32(s1 + matched)) {
+		s2 += 4;
+		matched += 4;
+	}
+	if (is_little_endian() && s2 <= s2_limit - 4) {
+		u32 x =
+		    UNALIGNED_LOAD32(s2) ^ UNALIGNED_LOAD32(s1 + matched);
+		int matching_bits = find_lsb_set_non_zero(x);
+		matched += matching_bits >> 3;
+	} else {
+		while ((s2 < s2_limit) && (s1[matched] == *s2)) {
+			++s2;
+			++matched;
+		}
+	}
+	return matched;
+}
+#endif
+
+/*
+ * For 0 <= offset <= 4, GetU32AtOffset(UNALIGNED_LOAD64(p), offset) will
+ *  equal UNALIGNED_LOAD32(p + offset).  Motivation: On x86-64 hardware we have
+ * empirically found that overlapping loads such as
+ *  UNALIGNED_LOAD32(p) ... UNALIGNED_LOAD32(p+1) ... UNALIGNED_LOAD32(p+2)
+ * are slower than UNALIGNED_LOAD64(p) followed by shifts and casts to u32.
+ */
+static inline u32 get_u32_at_offset(u64 v, int offset)
+{
+	DCHECK(0 <= offset && offset <= 4);
+	return v >> (is_little_endian()? 8 * offset : 32 - 8 * offset);
+}
+
+/*
+ * Flat array compression that does not emit the "uncompressed length"
+ *  prefix. Compresses "input" string to the "*op" buffer.
+ *
+ * REQUIRES: "input" is at most "kBlockSize" bytes long.
+ * REQUIRES: "op" points to an array of memory that is at least
+ * "MaxCompressedLength(input.size())" in size.
+ * REQUIRES: All elements in "table[0..table_size-1]" are initialized to zero.
+ * REQUIRES: "table_size" is a power of two
+ *
+ * Returns an "end" pointer into "op" buffer.
+ * "end - op" is the compressed size of "input".
+ */
+
+static char *compress_fragment(const char *const input,
+			       const size_t input_size,
+			       char *op, u16 * table, const int table_size)
+{
+	/* "ip" is the input pointer, and "op" is the output pointer. */
+	const char *ip = input;
+	CHECK_LE(input_size, kblock_size);
+	CHECK_EQ(table_size & (table_size - 1), 0);
+	const int shift = 32 - log2_floor(table_size);
+	DCHECK_EQ(UINT_MAX >> shift, table_size - 1);
+	const char *ip_end = input + input_size;
+	const char *baseip = ip;
+	/*
+	 * Bytes in [next_emit, ip) will be emitted as literal bytes.  Or
+	 *  [next_emit, ip_end) after the main loop.
+	 */
+	const char *next_emit = ip;
+
+	const int kinput_margin_bytes = 15;
+
+	if (likely(input_size >= kinput_margin_bytes)) {
+		const char *ip_limit = input + input_size -
+			kinput_margin_bytes;
+
+		u32 next_hash;
+		for (next_hash = hash(++ip, shift);;) {
+			DCHECK_LT(next_emit, ip);
+/*
+ * The body of this loop calls EmitLiteral once and then EmitCopy one or
+ * more times.  (The exception is that when we're close to exhausting
+ * the input we goto emit_remainder.)
+ *
+ * In the first iteration of this loop we're just starting, so
+ * there's nothing to copy, so calling EmitLiteral once is
+ * necessary.  And we only start a new iteration when the
+ * current iteration has determined that a call to EmitLiteral will
+ * precede the next call to EmitCopy (if any).
+ *
+ * Step 1: Scan forward in the input looking for a 4-byte-long match.
+ * If we get close to exhausting the input then goto emit_remainder.
+ *
+ * Heuristic match skipping: If 32 bytes are scanned with no matches
+ * found, start looking only at every other byte. If 32 more bytes are
+ * scanned, look at every third byte, etc.. When a match is found,
+ * immediately go back to looking at every byte. This is a small loss
+ * (~5% performance, ~0.1% density) for lcompressible data due to more
+ * bookkeeping, but for non-compressible data (such as JPEG) it's a huge
+ * win since the compressor quickly "realizes" the data is incompressible
+ * and doesn't bother looking for matches everywhere.
+ *
+ * The "skip" variable keeps track of how many bytes there are since the
+ * last match; dividing it by 32 (ie. right-shifting by five) gives the
+ * number of bytes to move ahead for each iteration.
+ */
+			u32 skip = 32;
+
+			const char *next_ip = ip;
+			const char *candidate;
+			do {
+				ip = next_ip;
+				u32 hval = next_hash;
+				DCHECK_EQ(hval, hash(ip, shift));
+				u32 bytes_between_hash_lookups = skip++ >> 5;
+				next_ip = ip + bytes_between_hash_lookups;
+				if (unlikely(next_ip > ip_limit)) {
+					goto emit_remainder;
+				}
+				next_hash = hash(next_ip, shift);
+				candidate = baseip + table[hval];
+				DCHECK_GE(candidate, baseip);
+				DCHECK_LT(candidate, ip);
+
+				table[hval] = ip - baseip;
+			} while (likely(UNALIGNED_LOAD32(ip) !=
+					UNALIGNED_LOAD32(candidate)));
+
+/*
+ * Step 2: A 4-byte match has been found.  We'll later see if more
+ * than 4 bytes match.  But, prior to the match, input
+ * bytes [next_emit, ip) are unmatched.  Emit them as "literal bytes."
+ */
+			DCHECK_LE(next_emit + 16, ip_end);
+			op = emit_literal(op, next_emit, ip - next_emit, true);
+
+/*
+ * Step 3: Call EmitCopy, and then see if another EmitCopy could
+ * be our next move.  Repeat until we find no match for the
+ * input immediately after what was consumed by the last EmitCopy call.
+ *
+ * If we exit this loop normally then we need to call EmitLiteral next,
+ * though we don't yet know how big the literal will be.  We handle that
+ * by proceeding to the next iteration of the main loop.  We also can exit
+ * this loop via goto if we get close to exhausting the input.
+ */
+			u64 input_bytes = 0;
+			u32 candidate_bytes = 0;
+
+			do {
+/*
+ * We have a 4-byte match at ip, and no need to emit any
+ *  "literal bytes" prior to ip.
+ */
+				const char *base = ip;
+				int matched = 4 +
+				    find_match_length(candidate + 4, ip + 4,
+						      ip_end);
+				ip += matched;
+				int offset = base - candidate;
+				DCHECK_EQ(0, memcmp(base, candidate, matched));
+				op = emit_copy(op, offset, matched);
+/*
+ * We could immediately start working at ip now, but to improve
+ * compression we first update table[Hash(ip - 1, ...)].
+ */
+				const char *insert_tail = ip - 1;
+				next_emit = ip;
+				if (unlikely(ip >= ip_limit)) {
+					goto emit_remainder;
+				}
+				input_bytes = UNALIGNED_LOAD64(insert_tail);
+				u32 prev_hash =
+				    hash_bytes(get_u32_at_offset
+					       (input_bytes, 0), shift);
+				table[prev_hash] = ip - baseip - 1;
+				u32 cur_hash =
+				    hash_bytes(get_u32_at_offset
+					       (input_bytes, 1), shift);
+				candidate = baseip + table[cur_hash];
+				candidate_bytes = UNALIGNED_LOAD32(candidate);
+				table[cur_hash] = ip - baseip;
+			} while (get_u32_at_offset(input_bytes, 1) ==
+				 candidate_bytes);
+
+			next_hash =
+			    hash_bytes(get_u32_at_offset(input_bytes, 2),
+				       shift);
+			++ip;
+		}
+	}
+
+emit_remainder:
+	/* Emit the remaining bytes as a literal */
+	if (next_emit < ip_end)
+		op = emit_literal(op, next_emit, ip_end - next_emit, false);
+
+	return op;
+}
+
+/*
+ * -----------------------------------------------------------------------
+ *  Lookup table for decompression code.  Generated by ComputeTable() below.
+ * -----------------------------------------------------------------------
+ */
+
+/* Mapping from i in range [0,4] to a mask to extract the bottom 8*i bits */
+static const u32 wordmask[] = {
+	0u, 0xffu, 0xffffu, 0xffffffu, 0xffffffffu
+};
+
+/*
+ * Data stored per entry in lookup table:
+ *       Range   Bits-used       Description
+ *      ------------------------------------
+ *      1..64   0..7            Literal/copy length encoded in opcode byte
+ *      0..7    8..10           Copy offset encoded in opcode byte / 256
+ *      0..4    11..13          Extra bytes after opcode
+ *
+ * We use eight bits for the length even though 7 would have sufficed
+ * because of efficiency reasons:
+ *      (1) Extracting a byte is faster than a bit-field
+ *      (2) It properly aligns copy offset so we do not need a <<8
+ */
+static const u16 char_table[256] = {
+	0x0001, 0x0804, 0x1001, 0x2001, 0x0002, 0x0805, 0x1002, 0x2002,
+	0x0003, 0x0806, 0x1003, 0x2003, 0x0004, 0x0807, 0x1004, 0x2004,
+	0x0005, 0x0808, 0x1005, 0x2005, 0x0006, 0x0809, 0x1006, 0x2006,
+	0x0007, 0x080a, 0x1007, 0x2007, 0x0008, 0x080b, 0x1008, 0x2008,
+	0x0009, 0x0904, 0x1009, 0x2009, 0x000a, 0x0905, 0x100a, 0x200a,
+	0x000b, 0x0906, 0x100b, 0x200b, 0x000c, 0x0907, 0x100c, 0x200c,
+	0x000d, 0x0908, 0x100d, 0x200d, 0x000e, 0x0909, 0x100e, 0x200e,
+	0x000f, 0x090a, 0x100f, 0x200f, 0x0010, 0x090b, 0x1010, 0x2010,
+	0x0011, 0x0a04, 0x1011, 0x2011, 0x0012, 0x0a05, 0x1012, 0x2012,
+	0x0013, 0x0a06, 0x1013, 0x2013, 0x0014, 0x0a07, 0x1014, 0x2014,
+	0x0015, 0x0a08, 0x1015, 0x2015, 0x0016, 0x0a09, 0x1016, 0x2016,
+	0x0017, 0x0a0a, 0x1017, 0x2017, 0x0018, 0x0a0b, 0x1018, 0x2018,
+	0x0019, 0x0b04, 0x1019, 0x2019, 0x001a, 0x0b05, 0x101a, 0x201a,
+	0x001b, 0x0b06, 0x101b, 0x201b, 0x001c, 0x0b07, 0x101c, 0x201c,
+	0x001d, 0x0b08, 0x101d, 0x201d, 0x001e, 0x0b09, 0x101e, 0x201e,
+	0x001f, 0x0b0a, 0x101f, 0x201f, 0x0020, 0x0b0b, 0x1020, 0x2020,
+	0x0021, 0x0c04, 0x1021, 0x2021, 0x0022, 0x0c05, 0x1022, 0x2022,
+	0x0023, 0x0c06, 0x1023, 0x2023, 0x0024, 0x0c07, 0x1024, 0x2024,
+	0x0025, 0x0c08, 0x1025, 0x2025, 0x0026, 0x0c09, 0x1026, 0x2026,
+	0x0027, 0x0c0a, 0x1027, 0x2027, 0x0028, 0x0c0b, 0x1028, 0x2028,
+	0x0029, 0x0d04, 0x1029, 0x2029, 0x002a, 0x0d05, 0x102a, 0x202a,
+	0x002b, 0x0d06, 0x102b, 0x202b, 0x002c, 0x0d07, 0x102c, 0x202c,
+	0x002d, 0x0d08, 0x102d, 0x202d, 0x002e, 0x0d09, 0x102e, 0x202e,
+	0x002f, 0x0d0a, 0x102f, 0x202f, 0x0030, 0x0d0b, 0x1030, 0x2030,
+	0x0031, 0x0e04, 0x1031, 0x2031, 0x0032, 0x0e05, 0x1032, 0x2032,
+	0x0033, 0x0e06, 0x1033, 0x2033, 0x0034, 0x0e07, 0x1034, 0x2034,
+	0x0035, 0x0e08, 0x1035, 0x2035, 0x0036, 0x0e09, 0x1036, 0x2036,
+	0x0037, 0x0e0a, 0x1037, 0x2037, 0x0038, 0x0e0b, 0x1038, 0x2038,
+	0x0039, 0x0f04, 0x1039, 0x2039, 0x003a, 0x0f05, 0x103a, 0x203a,
+	0x003b, 0x0f06, 0x103b, 0x203b, 0x003c, 0x0f07, 0x103c, 0x203c,
+	0x0801, 0x0f08, 0x103d, 0x203d, 0x1001, 0x0f09, 0x103e, 0x203e,
+	0x1801, 0x0f0a, 0x103f, 0x203f, 0x2001, 0x0f0b, 0x1040, 0x2040
+};
+
+struct snappy_decompressor {
+	struct source *reader;	/* Underlying source of bytes to decompress */
+	const char *ip;		/* Points to next buffered byte */
+	const char *ip_limit;	/* Points just past buffered bytes */
+	u32 peeked;		/* Bytes peeked from reader (need to skip) */
+	bool eof;		/* Hit end of input without an error? */
+	char scratch[5];	/* Temporary buffer for peekfast boundaries */
+};
+
+static void
+init_snappy_decompressor(struct snappy_decompressor *d, struct source *reader)
+{
+	d->reader = reader;
+	d->ip = NULL;
+	d->ip_limit = NULL;
+	d->peeked = 0;
+	d->eof = false;
+}
+
+static void exit_snappy_decompressor(struct snappy_decompressor *d)
+{
+	skip(d->reader, d->peeked);
+}
+
+/*
+ * Read the uncompressed length stored at the start of the compressed data.
+ * On succcess, stores the length in *result and returns true.
+ * On failure, returns false.
+ */
+static bool read_uncompressed_length(struct snappy_decompressor *d,
+				     u32 * result)
+{
+	DCHECK(d->ip == NULL);	/*
+				 * Must not have read anything yet
+				 * Length is encoded in 1..5 bytes
+				 */
+	*result = 0;
+	u32 shift = 0;
+	while (true) {
+		if (shift >= 32)
+			return false;
+		size_t n;
+		const char *ip = peek(d->reader, &n);
+		if (n == 0)
+			return false;
+		const unsigned char c = *(const unsigned char *)(ip);
+		skip(d->reader, 1);
+		*result |= (u32) (c & 0x7f) << shift;
+		if (c < 128) {
+			break;
+		}
+		shift += 7;
+	}
+	return true;
+}
+
+static bool refill_tag(struct snappy_decompressor *d);
+
+/*
+ * Process the next item found in the input.
+ * Returns true if successful, false on error or end of input.
+ */
+static void decompress_all_tags(struct snappy_decompressor *d,
+				struct writer *writer)
+{
+	const char *ip = d->ip;
+
+	for (;;) {
+		if (d->ip_limit - ip < 5) {
+			d->ip = ip;
+			if (!refill_tag(d))
+				return;
+			ip = d->ip;
+		}
+
+		const unsigned char c = *(const unsigned char *)(ip++);
+
+		if ((c & 0x3) == LITERAL) {
+			u32 literal_length = c >> 2;
+			if (unlikely(literal_length >= 60)) {
+				/* Long literal */
+				const u32 literal_ll = literal_length - 59;
+				literal_length = get_unaligned_le32(ip) &
+					wordmask[literal_ll];
+				ip += literal_ll;
+			}
+			++literal_length;
+
+			u32 avail = d->ip_limit - ip;
+			while (avail < literal_length) {
+				if (!writer_append(writer, ip, avail, false))
+					return;
+				literal_length -= avail;
+				skip(d->reader, d->peeked);
+				size_t n;
+				ip = peek(d->reader, &n);
+				avail = n;
+				d->peeked = avail;
+				if (avail == 0)
+					return;	/* Premature end of input */
+				d->ip_limit = ip + avail;
+			}
+			bool allow_fast_path = (avail >= 16);
+			if (!writer_append(writer, ip, literal_length,
+					   allow_fast_path))
+				return;
+			ip += literal_length;
+		} else {
+			const u32 entry = char_table[c];
+			const u32 trailer = get_unaligned_le32(ip) &
+				wordmask[entry >> 11];
+			const u32 length = entry & 0xff;
+			ip += entry >> 11;
+
+			/*
+			 * copy_offset/256 is encoded in bits 8..10.
+			 * By just fetching those bits, we get
+			 * copy_offset (since the bit-field starts at
+			 * bit 8).
+			 */
+			const u32 copy_offset = entry & 0x700;
+			if (!writer_append_from_self(writer,
+						     copy_offset + trailer,
+						     length))
+				return;
+		}
+	}
+}
+
+static bool refill_tag(struct snappy_decompressor *d)
+{
+	const char *ip = d->ip;
+
+	if (ip == d->ip_limit) {
+		size_t n;
+		/* Fetch a new fragment from the reader */
+		skip(d->reader, d->peeked); /* All peeked bytes are used up */
+		ip = peek(d->reader, &n);
+		d->peeked = n;
+		if (n == 0) {
+			d->eof = true;
+			return false;
+		}
+		d->ip_limit = ip + n;
+	}
+
+	/* Read the tag character */
+	DCHECK_LT(ip, d->ip_limit);
+	const unsigned char c = *(const unsigned char *)(ip);
+	const u32 entry = char_table[c];
+	const u32 needed = (entry >> 11) + 1;	/* +1 byte for 'c' */
+	DCHECK_LE(needed, sizeof(d->scratch));
+
+	/* Read more bytes from reader if needed */
+	u32 nbuf = d->ip_limit - ip;
+
+	if (nbuf < needed) {
+		/*
+		 * Stitch together bytes from ip and reader to form the word
+		 * contents.  We store the needed bytes in "scratch".  They
+		 * will be consumed immediately by the caller since we do not
+		 * read more than we need.
+		 */
+		memmove(d->scratch, ip, nbuf);
+		skip(d->reader, d->peeked); /* All peeked bytes are used up */
+		d->peeked = 0;
+		while (nbuf < needed) {
+			size_t length;
+			const char *src = peek(d->reader, &length);
+			if (length == 0)
+				return false;
+			u32 to_add = min_t(u32, needed - nbuf, length);
+			memcpy(d->scratch + nbuf, src, to_add);
+			nbuf += to_add;
+			skip(d->reader, to_add);
+		}
+		DCHECK_EQ(nbuf, needed);
+		d->ip = d->scratch;
+		d->ip_limit = d->scratch + needed;
+	} else if (nbuf < 5) {
+		/*
+		 * Have enough bytes, but move into scratch so that we do not
+		 * read past end of input
+		 */
+		memmove(d->scratch, ip, nbuf);
+		skip(d->reader, d->peeked); /* All peeked bytes are used up */
+		d->peeked = 0;
+		d->ip = d->scratch;
+		d->ip_limit = d->scratch + nbuf;
+	} else {
+		/* Pass pointer to buffer returned by reader. */
+		d->ip = ip;
+	}
+	return true;
+}
+
+static int internal_uncompress(struct source *r,
+			       struct writer *writer, u32 max_len)
+{
+	struct snappy_decompressor decompressor;
+	u32 uncompressed_len = 0;
+
+	init_snappy_decompressor(&decompressor, r);
+
+	if (!read_uncompressed_length(&decompressor, &uncompressed_len))
+		return -EIO;
+	/* Protect against possible DoS attack */
+	if ((u64) (uncompressed_len) > max_len)
+		return -EIO;
+
+	writer_set_expected_length(writer, uncompressed_len);
+
+	/* Process the entire input */
+	decompress_all_tags(&decompressor, writer);
+
+	exit_snappy_decompressor(&decompressor);
+	return (decompressor.eof && writer_check_length(writer)) ? 0 : -EIO;
+}
+
+static inline int compress(struct snappy_env *env, struct source *reader,
+			   struct sink *writer)
+{
+	int err;
+	size_t written = 0;
+	int N = available(reader);
+	char ulength[kmax32];
+	char *p = varint_encode32(ulength, N);
+
+	append(writer, ulength, p - ulength);
+	written += (p - ulength);
+
+	while (N > 0) {
+		/* Get next block to compress (without copying if possible) */
+		size_t fragment_size;
+		const char *fragment = peek(reader, &fragment_size);
+		if (fragment_size == 0) {
+			err = -EIO;
+			goto out;
+		}
+		const int num_to_read = min_t(int, N, kblock_size);
+		size_t bytes_read = fragment_size;
+
+		int pending_advance = 0;
+		if (bytes_read >= num_to_read) {
+			/* Buffer returned by reader is large enough */
+			pending_advance = num_to_read;
+			fragment_size = num_to_read;
+		}
+#ifdef SCATHER_GATHER
+		else {
+			memcpy(env->scratch, fragment, bytes_read);
+			skip(reader, bytes_read);
+
+			while (bytes_read < num_to_read) {
+				fragment = peek(reader, &fragment_size);
+				size_t n =
+				    min_t(size_t, fragment_size,
+					  num_to_read - bytes_read);
+				memcpy(env->scratch + bytes_read, fragment, n);
+				bytes_read += n;
+				skip(reader, n);
+			}
+			DCHECK_EQ(bytes_read, num_to_read);
+			fragment = env->scratch;
+			fragment_size = num_to_read;
+		}
+#endif
+		if (fragment_size < num_to_read)
+			return -EIO;
+
+		/* Get encoding table for compression */
+		int table_size;
+		u16 *table = get_hash_table(env, num_to_read, &table_size);
+
+		/* Compress input_fragment and append to dest */
+		const int max_output =
+		    snappy_max_compressed_length(num_to_read);
+
+		char *dest;
+		dest = sink_peek(writer, max_output);
+#ifdef SCATHER_GATHER
+		if (!dest) {
+			/*
+			 * Need a scratch buffer for the output,
+			 * because the byte sink doesn't have enough
+			 * in one piece.
+			 */
+			dest = env->scratch_output;
+		}
+#endif
+		char *end = compress_fragment(fragment, fragment_size,
+					      dest, table, table_size);
+		append(writer, dest, end - dest);
+		written += (end - dest);
+
+		N -= num_to_read;
+		skip(reader, pending_advance);
+	}
+
+	err = 0;
+out:
+	return err;
+}
+
+/**
+ * snappy_compress - Compress a buffer using the snappy compressor.
+ * @env: Preallocated environment
+ * @input: Input buffer
+ * @input_length: Length of input_buffer
+ * @compressed: Output buffer for compressed data
+ * @compressed_length: The real length of the output written here.
+ *
+ * Return 0 on success, otherwise an negative error code.
+ *
+ * The output buffer must be at least
+ * snappy_max_compressed_length(input_length) bytes long.
+ *
+ * Requires a preallocated environment from snappy_init_env.
+ * The environment does not keep state over individual calls
+ * of this function, just preallocates the memory.
+ */
+int snappy_compress(struct snappy_env *env,
+		    const char *input,
+		    size_t input_length,
+		    char *compressed, size_t *compressed_length)
+{
+	struct source reader = {
+		.ptr = input,
+		.left = input_length
+	};
+	struct sink writer = {
+		.dest = compressed,
+	};
+	int err = compress(env, &reader, &writer);
+
+	/* Compute how many bytes were added */
+	*compressed_length = (writer.dest - compressed);
+	return err;
+}
+EXPORT_SYMBOL(snappy_compress);
+
+/**
+ * snappy_uncompress - Uncompress a snappy compressed buffer
+ * @compressed: Input buffer with compressed data
+ * @n: length of compressed buffer
+ * @uncompressed: buffer for uncompressed data
+ *
+ * The uncompressed data buffer must be at least
+ * snappy_uncompressed_length(compressed) bytes long.
+ *
+ * Returns true when successfull, otherwise false.
+ */
+bool snappy_uncompress(const char *compressed, size_t n, char *uncompressed)
+{
+	struct source reader = {
+		.ptr = compressed,
+		.left = n
+	};
+	struct writer output = {
+		.base = uncompressed,
+		.op = uncompressed
+	};
+	return internal_uncompress(&reader, &output, 0xffffffff);
+}
+EXPORT_SYMBOL(snappy_uncompress);
+
+/**
+ * snappy_init_env - Allocate snappy compression environment
+ * @env: Environment to preallocate
+ *
+ * Returns 0 on success, otherwise negative errno.
+ * Must run in process context.
+ */
+int snappy_init_env(struct snappy_env *env)
+{
+	env->hash_table = vmalloc(sizeof(u16) * kmax_hash_table_size);
+	if (!env->hash_table)
+		goto error;
+#ifdef SCATHER_GATHER
+	env->scratch = vmalloc(kblock_size);
+	env->scratch_output =
+		vmalloc(snappy_max_compressed_length(kblock_size));
+	if (!env->scratch || !env->scratch_output)
+		goto error;
+#endif
+	return 0;
+error:
+	snappy_free_env(env);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(snappy_init_env);
+
+/**
+ * snappy_free_env - Free an snappy compression environment
+ * @env: Environment to free.
+ *
+ * Must run in process context.
+ */
+void snappy_free_env(struct snappy_env *env)
+{
+	vfree(env->hash_table);
+#ifdef SCATHER_GATHER
+	vfree(env->scratch);
+	vfree(env->scratch_output);
+#endif
+	memset(env, 0, sizeof(struct snappy_env));
+}
+EXPORT_SYMBOL(snappy_free_env);
-- 
1.7.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ