| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ee800c0a4d90e61d71bf64cc62fd1b673975ce0e.1326616556.git.joe@perches.com>
Date: Sun, 15 Jan 2012 00:38:42 -0800
From: Joe Perches <joe@...ches.com>
To: linux-kernel@...r.kernel.org
Cc: Brett Rudley <brudley@...adcom.com>,
Henry Ptasinski <henryp@...adcom.com>,
Roland Vossen <rvossen@...adcom.com>,
Arend van Spriel <arend@...adcom.com>,
"Franky (Zhenhui) Lin" <frankyl@...adcom.com>,
Kan Yan <kanyan@...adcom.com>,
"John W. Linville" <linville@...driver.com>,
linux-wireless@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH 5/8] brcm80211: Convert printk(KERN_DEBUG to pr_debug
Use pr_debug to allow dynamic debugging to work.
Move an #endif to allow brcmf_dbg_hex_dump
to be outside the #if/#endif block.
Move a const char* declaration to be inside a
pr_debug so the function doesn't need a #if/#endif
block.
Don't use temporaries in debugging functions so
the code can be optimized away.
Signed-off-by: Joe Perches <joe@...ches.com>
---
.../net/wireless/brcm80211/brcmfmac/dhd_common.c | 4 +-
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 11 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 147 +++++++++-----------
drivers/net/wireless/brcm80211/brcmsmac/main.h | 4 +-
.../net/wireless/brcm80211/brcmsmac/phy/phy_n.c | 3 +-
drivers/net/wireless/brcm80211/brcmutil/utils.c | 2 +-
6 files changed, 78 insertions(+), 93 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 9385c84..1c75ea8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -399,10 +399,10 @@ brcmf_c_show_host_event(struct brcmf_event_msg *event, void *event_data)
p = (char *)&buf[sizeof(struct msgtrace_hdr)];
while ((s = strstr(p, "\n")) != NULL) {
*s = '\0';
- printk(KERN_DEBUG"%s\n", p);
+ pr_debug("%s\n", p);
p = s + 1;
}
- printk(KERN_DEBUG "%s\n", p);
+ pr_debug("%s\n", p);
/* Reset datalen to avoid display below */
datalen = 0;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 79230e7..91ec023 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2137,6 +2137,7 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
#ifdef DEBUG
tx_packets[pkt->priority]++;
+#endif
brcmf_dbg_hex_dump(BRCMF_BYTES_ON() &&
((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
@@ -2149,7 +2150,6 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_sdio *bus, struct sk_buff *pkt,
chan != SDPCM_CONTROL_CHANNEL))) &&
BRCMF_HDRS_ON(),
frame, min_t(u16, len, 16), "TxHdr:\n");
-#endif
/* Raise len to next SDIO block to eliminate tail command */
if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
@@ -2806,7 +2806,7 @@ static int brcmf_sdbrcm_readconsole(struct brcmf_sdio *bus)
if (line[n - 1] == '\r')
n--;
line[n] = 0;
- printk(KERN_DEBUG "CONSOLE: %s\n", line);
+ pr_debug("CONSOLE: %s\n", line);
}
}
break2:
@@ -3676,11 +3676,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva)
if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE))
brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n");
-#ifdef DEBUG
- printk(KERN_DEBUG "F1 signature read @0x18000000=0x%4x\n",
- brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
-
-#endif /* DEBUG */
+ pr_debug("F1 signature read @0x18000000=0x%4x\n",
+ brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
/*
* Force PLL off until brcmf_sdio_chip_attach()
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 3ae07bb..14ab606 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -5765,56 +5765,43 @@ int brcms_c_module_unregister(struct brcms_pub *pub, const char *name,
return -ENODATA;
}
-#ifdef DEBUG
-static const char * const supr_reason[] = {
- "None", "PMQ Entry", "Flush request",
- "Previous frag failure", "Channel mismatch",
- "Lifetime Expiry", "Underflow"
-};
-
-static void brcms_c_print_txs_status(u16 s)
-{
- printk(KERN_DEBUG "[15:12] %d frame attempts\n",
- (s & TX_STATUS_FRM_RTX_MASK) >> TX_STATUS_FRM_RTX_SHIFT);
- printk(KERN_DEBUG " [11:8] %d rts attempts\n",
- (s & TX_STATUS_RTS_RTX_MASK) >> TX_STATUS_RTS_RTX_SHIFT);
- printk(KERN_DEBUG " [7] %d PM mode indicated\n",
- ((s & TX_STATUS_PMINDCTD) ? 1 : 0));
- printk(KERN_DEBUG " [6] %d intermediate status\n",
- ((s & TX_STATUS_INTERMEDIATE) ? 1 : 0));
- printk(KERN_DEBUG " [5] %d AMPDU\n",
- (s & TX_STATUS_AMPDU) ? 1 : 0);
- printk(KERN_DEBUG " [4:2] %d Frame Suppressed Reason (%s)\n",
- ((s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT),
- supr_reason[(s & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT]);
- printk(KERN_DEBUG " [1] %d acked\n",
- ((s & TX_STATUS_ACK_RCV) ? 1 : 0));
-}
-#endif /* DEBUG */
-
void brcms_c_print_txstatus(struct tx_status *txs)
{
-#if defined(DEBUG)
- u16 s = txs->status;
- u16 ackphyrxsh = txs->ackphyrxsh;
-
- printk(KERN_DEBUG "\ntxpkt (MPDU) Complete\n");
-
- printk(KERN_DEBUG "FrameID: %04x ", txs->frameid);
- printk(KERN_DEBUG "TxStatus: %04x", s);
- printk(KERN_DEBUG "\n");
-
- brcms_c_print_txs_status(s);
-
- printk(KERN_DEBUG "LastTxTime: %04x ", txs->lasttxtime);
- printk(KERN_DEBUG "Seq: %04x ", txs->sequence);
- printk(KERN_DEBUG "PHYTxStatus: %04x ", txs->phyerr);
- printk(KERN_DEBUG "RxAckRSSI: %04x ",
- (ackphyrxsh & PRXS1_JSSI_MASK) >> PRXS1_JSSI_SHIFT);
- printk(KERN_DEBUG "RxAckSQ: %04x",
- (ackphyrxsh & PRXS1_SQ_MASK) >> PRXS1_SQ_SHIFT);
- printk(KERN_DEBUG "\n");
-#endif /* defined(DEBUG) */
+ pr_debug("\ntxpkt (MPDU) Complete\n");
+
+ pr_debug("FrameID: %04x TxStatus: %04x\n", txs->frameid, txs->status);
+
+ pr_debug("[15:12] %d frame attempts\n",
+ (txs->status & TX_STATUS_FRM_RTX_MASK) >>
+ TX_STATUS_FRM_RTX_SHIFT);
+ pr_debug(" [11:8] %d rts attempts\n",
+ (txs->status & TX_STATUS_RTS_RTX_MASK) >>
+ TX_STATUS_RTS_RTX_SHIFT);
+ pr_debug(" [7] %d PM mode indicated\n",
+ txs->status & TX_STATUS_PMINDCTD ? 1 : 0);
+ pr_debug(" [6] %d intermediate status\n",
+ txs->status & TX_STATUS_INTERMEDIATE ? 1 : 0);
+ pr_debug(" [5] %d AMPDU\n",
+ txs->status & TX_STATUS_AMPDU ? 1 : 0);
+ pr_debug(" [4:2] %d Frame Suppressed Reason (%s)\n",
+ (txs->status & TX_STATUS_SUPR_MASK) >> TX_STATUS_SUPR_SHIFT,
+ (const char *[]) {
+ "None",
+ "PMQ Entry",
+ "Flush request",
+ "Previous frag failure",
+ "Channel mismatch",
+ "Lifetime Expiry",
+ "Underflow"
+ } [(txs->status & TX_STATUS_SUPR_MASK) >>
+ TX_STATUS_SUPR_SHIFT]);
+ pr_debug(" [1] %d acked\n",
+ txs->status & TX_STATUS_ACK_RCV ? 1 : 0);
+
+ pr_debug("LastTxTime: %04x Seq: %04x PHYTxStatus: %04x RxAckRSSI: %04x RxAckSQ: %04x\n",
+ txs->lasttxtime, txs->sequence, txs->phyerr,
+ (txs->ackphyrxsh & PRXS1_JSSI_MASK) >> PRXS1_JSSI_SHIFT,
+ (txs->ackphyrxsh & PRXS1_SQ_MASK) >> PRXS1_SQ_SHIFT);
}
bool brcms_c_chipmatch(u16 vendor, u16 device)
@@ -5871,53 +5858,53 @@ void brcms_c_print_txdesc(struct d11txh *txh)
struct ieee80211_rts rts = txh->rts_frame;
/* add plcp header along with txh descriptor */
- printk(KERN_DEBUG "Raw TxDesc + plcp header:\n");
+ pr_debug("Raw TxDesc + plcp header:\n");
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
txh, sizeof(struct d11txh) + 48);
- printk(KERN_DEBUG "TxCtlLow: %04x ", mtcl);
- printk(KERN_DEBUG "TxCtlHigh: %04x ", mtch);
- printk(KERN_DEBUG "FC: %04x ", mfc);
- printk(KERN_DEBUG "FES Time: %04x\n", tfest);
- printk(KERN_DEBUG "PhyCtl: %04x%s ", ptcw,
+ pr_debug("TxCtlLow: %04x ", mtcl);
+ pr_debug("TxCtlHigh: %04x ", mtch);
+ pr_debug("FC: %04x ", mfc);
+ pr_debug("FES Time: %04x\n", tfest);
+ pr_debug("PhyCtl: %04x%s ", ptcw,
(ptcw & PHY_TXC_SHORT_HDR) ? " short" : "");
- printk(KERN_DEBUG "PhyCtl_1: %04x ", ptcw_1);
- printk(KERN_DEBUG "PhyCtl_1_Fbr: %04x\n", ptcw_1_Fbr);
- printk(KERN_DEBUG "PhyCtl_1_Rts: %04x ", ptcw_1_Rts);
- printk(KERN_DEBUG "PhyCtl_1_Fbr_Rts: %04x\n", ptcw_1_FbrRts);
- printk(KERN_DEBUG "MainRates: %04x ", mainrates);
- printk(KERN_DEBUG "XtraFrameTypes: %04x ", xtraft);
- printk(KERN_DEBUG "\n");
+ pr_debug("PhyCtl_1: %04x ", ptcw_1);
+ pr_debug("PhyCtl_1_Fbr: %04x\n", ptcw_1_Fbr);
+ pr_debug("PhyCtl_1_Rts: %04x ", ptcw_1_Rts);
+ pr_debug("PhyCtl_1_Fbr_Rts: %04x\n", ptcw_1_FbrRts);
+ pr_debug("MainRates: %04x ", mainrates);
+ pr_debug("XtraFrameTypes: %04x ", xtraft);
+ pr_debug("\n");
print_hex_dump_bytes("SecIV:", DUMP_PREFIX_OFFSET, iv, sizeof(txh->IV));
print_hex_dump_bytes("RA:", DUMP_PREFIX_OFFSET,
ra, sizeof(txh->TxFrameRA));
- printk(KERN_DEBUG "Fb FES Time: %04x ", tfestfb);
+ pr_debug("Fb FES Time: %04x ", tfestfb);
print_hex_dump_bytes("Fb RTS PLCP:", DUMP_PREFIX_OFFSET,
rtspfb, sizeof(txh->RTSPLCPFallback));
- printk(KERN_DEBUG "RTS DUR: %04x ", rtsdfb);
+ pr_debug("RTS DUR: %04x ", rtsdfb);
print_hex_dump_bytes("PLCP:", DUMP_PREFIX_OFFSET,
fragpfb, sizeof(txh->FragPLCPFallback));
- printk(KERN_DEBUG "DUR: %04x", fragdfb);
- printk(KERN_DEBUG "\n");
+ pr_debug("DUR: %04x", fragdfb);
+ pr_debug("\n");
- printk(KERN_DEBUG "MModeLen: %04x ", mmodelen);
- printk(KERN_DEBUG "MModeFbrLen: %04x\n", mmodefbrlen);
+ pr_debug("MModeLen: %04x ", mmodelen);
+ pr_debug("MModeFbrLen: %04x\n", mmodefbrlen);
- printk(KERN_DEBUG "FrameID: %04x\n", tfid);
- printk(KERN_DEBUG "TxStatus: %04x\n", txs);
+ pr_debug("FrameID: %04x\n", tfid);
+ pr_debug("TxStatus: %04x\n", txs);
- printk(KERN_DEBUG "MaxNumMpdu: %04x\n", mnmpdu);
- printk(KERN_DEBUG "MaxAggbyte: %04x\n", mabyte);
- printk(KERN_DEBUG "MaxAggbyte_fb: %04x\n", mabyte_f);
- printk(KERN_DEBUG "MinByte: %04x\n", mmbyte);
+ pr_debug("MaxNumMpdu: %04x\n", mnmpdu);
+ pr_debug("MaxAggbyte: %04x\n", mabyte);
+ pr_debug("MaxAggbyte_fb: %04x\n", mabyte_f);
+ pr_debug("MinByte: %04x\n", mmbyte);
print_hex_dump_bytes("RTS PLCP:", DUMP_PREFIX_OFFSET,
rtsph, sizeof(txh->RTSPhyHeader));
print_hex_dump_bytes("RTS Frame:", DUMP_PREFIX_OFFSET,
(u8 *)&rts, sizeof(txh->rts_frame));
- printk(KERN_DEBUG "\n");
+ pr_debug("\n");
}
#endif /* defined(DEBUG) */
@@ -5999,7 +5986,7 @@ void brcms_c_print_rxh(struct d11rxhdr *rxh)
{0, NULL}
};
- printk(KERN_DEBUG "Raw RxDesc:\n");
+ pr_debug("Raw RxDesc:\n");
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, rxh,
sizeof(struct d11rxhdr));
@@ -6007,14 +5994,14 @@ void brcms_c_print_rxh(struct d11rxhdr *rxh)
snprintf(lenbuf, sizeof(lenbuf), "0x%x", len);
- printk(KERN_DEBUG "RxFrameSize: %6s (%d)%s\n", lenbuf, len,
+ pr_debug("RxFrameSize: %6s (%d)%s\n", lenbuf, len,
(rxh->PhyRxStatus_0 & PRXS0_SHORTH) ? " short preamble" : "");
- printk(KERN_DEBUG "RxPHYStatus: %04x %04x %04x %04x\n",
+ pr_debug("RxPHYStatus: %04x %04x %04x %04x\n",
phystatus_0, phystatus_1, phystatus_2, phystatus_3);
- printk(KERN_DEBUG "RxMACStatus: %x %s\n", macstatus1, flagstr);
- printk(KERN_DEBUG "RXMACaggtype: %x\n",
+ pr_debug("RxMACStatus: %x %s\n", macstatus1, flagstr);
+ pr_debug("RXMACaggtype: %x\n",
(macstatus2 & RXS_AGGTYPE_MASK));
- printk(KERN_DEBUG "RxTSFTime: %04x\n", rxh->RxTSFTime);
+ pr_debug("RxTSFTime: %04x\n", rxh->RxTSFTime);
}
#endif /* defined(DEBUG) */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.h b/drivers/net/wireless/brcm80211/brcmsmac/main.h
index 84a2a0d..8debc74 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.h
@@ -651,7 +651,9 @@ extern int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo,
#if defined(DEBUG)
extern void brcms_c_print_txdesc(struct d11txh *txh);
#else
-#define brcms_c_print_txdesc(a)
+static inline void brcms_c_print_txdesc(struct d11txh *txh)
+{
+}
#endif
extern int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
index a16f1ab..a0909be6 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
@@ -26434,8 +26434,7 @@ cal_try:
}
if (bcmerror != 0) {
- printk(KERN_DEBUG "%s: Failed, cnt = %d\n", __func__,
- cal_retry);
+ pr_debug("%s: Failed, cnt = %d\n", __func__, cal_retry);
if (cal_retry < CAL_RETRY_CNT) {
cal_retry++;
diff --git a/drivers/net/wireless/brcm80211/brcmutil/utils.c b/drivers/net/wireless/brcm80211/brcmutil/utils.c
index 2207eaa..4908660 100644
--- a/drivers/net/wireless/brcm80211/brcmutil/utils.c
+++ b/drivers/net/wireless/brcm80211/brcmutil/utils.c
@@ -247,7 +247,7 @@ void brcmu_prpkt(const char *msg, struct sk_buff *p0)
struct sk_buff *p;
if (msg && (msg[0] != '\0'))
- printk(KERN_DEBUG "%s:\n", msg);
+ pr_debug("%s:\n", msg);
for (p = p0; p; p = p->next)
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, p->data, p->len);
--
1.7.8.111.gad25c.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists