| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 Jan 2012 16:59:24 +0100
From: Eric Dumazet <eric.dumazet@...il.com>
To: Andrew Morton <akpm@...ux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@...fujitsu.com>,
Glauber Costa <glommer@...allels.com>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
Ingo Molnar <mingo@...e.hu>, linux-kernel@...r.kernel.org,
Russell King - ARM Linux <linux@....linux.org.uk>,
Paul Tuner <pjt@...gle.com>
Subject: [PATCH] proc: speedup /proc/stat handling
On a typical 16 cpus machine, "cat /proc/stat" gives more than 4096
bytes, and is slow :
# strace -T -o /tmp/STRACE cat /proc/stat | wc -c
5826
# grep "cpu " /tmp/STRACE
read(0, "cpu 1949310 19 2144714 12117253"..., 32768) = 5826 <0.001504>
Thats partly because show_stat() must be called twice since initial
buffer size is too small (4096 bytes for less than 32 possible cpus)
Fix this by :
1) Taking into account nr_irqs in the initial buffer sizing.
2) Using ksize() to allow better filling of initial buffer.
3) Reduce the bloat on "intr ..." line :
Dont output trailing " 0" values at the end of irq range.
An alternative to 1) would be to remember the largest m->count reached
in show_stat()
Signed-off-by: Eric Dumazet <eric.dumazet@...il.com>
Cc: Glauber Costa <glommer@...allels.com>
Cc: Russell King - ARM Linux <linux@....linux.org.uk>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@...fujitsu.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: Paul Tuner <pjt@...gle.com>
Cc: Peter Zijlstra <a.p.zijlstra@...llo.nl>
Cc: Ingo Molnar <mingo@...e.hu>
---
fs/proc/stat.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 121f77c..78db0fa 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -49,6 +49,20 @@ static u64 get_iowait_time(int cpu)
return iowait;
}
+/*
+ * Most irqs at the end of the range are never used.
+ * Find the upper limit, to not output trailing " 0" values
+ */
+static int highest_irq_used(void)
+{
+ int nr;
+
+ for (nr = nr_irqs; nr; nr--)
+ if (kstat_irqs(nr - 1))
+ break;
+ return nr;
+}
+
static int show_stat(struct seq_file *p, void *v)
{
int i, j;
@@ -129,10 +143,10 @@ static int show_stat(struct seq_file *p, void *v)
(unsigned long long)cputime64_to_clock_t(guest_nice));
}
seq_printf(p, "intr %llu", (unsigned long long)sum);
-
- /* sum again ? it could be updated? */
- for_each_irq_nr(j)
- seq_printf(p, " %u", kstat_irqs(j));
+ /* Note that the "sum" value can already be obsolete. */
+ j = highest_irq_used();
+ for (i = 0; i < j; i++)
+ seq_printf(p, " %u", kstat_irqs(i));
seq_printf(p,
"\nctxt %llu\n"
@@ -157,14 +171,17 @@ static int show_stat(struct seq_file *p, void *v)
static int stat_open(struct inode *inode, struct file *file)
{
- unsigned size = 4096 * (1 + num_possible_cpus() / 32);
+ unsigned size = 1024 + 128 * num_possible_cpus();
char *buf;
struct seq_file *m;
int res;
+ /* minimum size to display a 0 count per interrupt : 2 bytes */
+ size += 2 * nr_irqs;
+
/* don't ask for more than the kmalloc() max size */
- if (size > KMALLOC_MAX_SIZE)
- size = KMALLOC_MAX_SIZE;
+ size = min_t(unsigned, size, KMALLOC_MAX_SIZE);
+
buf = kmalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
@@ -173,7 +190,7 @@ static int stat_open(struct inode *inode, struct file *file)
if (!res) {
m = file->private_data;
m->buf = buf;
- m->size = size;
+ m->size = ksize(buf);
} else
kfree(buf);
return res;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists