| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 20 Jan 2012 18:43:22 -0500
From: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To: x86@...nel.org
Cc: Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
Ingo Molnar <mingo@...hat.com>,
Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>, linux-kernel@...r.kernel.org,
Guenter Roeck <guenter.roeck@...csson.com>
Subject: [PATCH] x86/platform: (TS-5500) revised ADC driver
Update of the ADC driver according to the Guenter Roeck's review.
Signed-off-by: Vivien Didelot <vivien.didelot@...oirfairelinux.com>
---
arch/x86/platform/ts5500/ts5500_adc.c | 228 +++++++++++++--------------------
1 files changed, 89 insertions(+), 139 deletions(-)
diff --git a/arch/x86/platform/ts5500/ts5500_adc.c b/arch/x86/platform/ts5500/ts5500_adc.c
index fc4560f..da6decf 100644
--- a/arch/x86/platform/ts5500/ts5500_adc.c
+++ b/arch/x86/platform/ts5500/ts5500_adc.c
@@ -62,57 +62,62 @@
#define TS5500_ADC_READ_DELAY 15 /* usec */
#define TS5500_ADC_READ_BUSY_MASK 0x01
-#define TS5500_ADC_NAME "MAX197 (8 channels)"
+#define TS5500_ADC_NAME "TS-5500 mapped MAX197 (8 channels)"
-/**
- * struct ts5500_adc_platform_data
- * @name: Name of the device.
- * @ioaddr: I/O address containing:
- * .data: Data register for conversion reading.
- * .ctrl: A/D Control Register (bit 0 = 0 when
- * conversion completed).
- * @read: Information about conversion reading, with:
- * .delay: Delay before next conversion.
- * .busy_mask: Control register bit 0 equals 1 means
- * conversion is not completed yet.
- * @ctrl: Data tables addressable by [polarity][range].
- * @ranges: Ranges.
- * .min: Min value.
- * .max: Max value.
- * @scale: Polarity/Range coefficients to scale raw conversion reading.
- */
-struct ts5500_adc_platform_data {
- const char *name;
- struct {
- int data;
- int ctrl;
- } ioaddr;
- struct {
- u8 delay;
- u8 busy_mask;
- } read;
- u8 ctrl[2][2];
- struct {
- int min[2][2];
- int max[2][2];
- } ranges;
- int scale[2][2];
+/* Data tables addressable by [polarity][range] */
+static const u8 ts5500_adc_ctrl[2][2] = {
+ {
+ TS5500_ADC_UNIPOLAR | TS5500_ADC_RANGE_5V,
+ TS5500_ADC_UNIPOLAR | TS5500_ADC_RANGE_10V
+ },
+ {
+ TS5500_ADC_BIPOLAR | TS5500_ADC_RANGE_5V,
+ TS5500_ADC_BIPOLAR | TS5500_ADC_RANGE_10V
+ }
+};
+
+/* Min/Max ranges */
+#define TS5500_ADC_RANGES_MIN_UNIPOLAR_5V 0
+#define TS5500_ADC_RANGES_MIN_UNIPOLAR_10V 0
+#define TS5500_ADC_RANGES_MIN_BIPOLAR_5V -5000
+#define TS5500_ADC_RANGES_MIN_BIPOLAR_10V -10000
+
+static const int ts5500_adc_ranges_min[2][2] = {
+ { TS5500_ADC_RANGES_MIN_UNIPOLAR_5V, TS5500_ADC_RANGES_MIN_UNIPOLAR_10V },
+ { TS5500_ADC_RANGES_MIN_BIPOLAR_5V, TS5500_ADC_RANGES_MIN_BIPOLAR_10V }
+};
+
+#define TS5500_ADC_RANGES_MAX_UNIPOLAR_5V 5000
+#define TS5500_ADC_RANGES_MAX_UNIPOLAR_10V 10000
+#define TS5500_ADC_RANGES_MAX_BIPOLAR_5V 5000
+#define TS5500_ADC_RANGES_MAX_BIPOLAR_10V 10000
+
+static const int ts5500_adc_ranges_max[2][2] = {
+ { TS5500_ADC_RANGES_MAX_UNIPOLAR_5V, TS5500_ADC_RANGES_MAX_UNIPOLAR_10V },
+ { TS5500_ADC_RANGES_MAX_BIPOLAR_5V, TS5500_ADC_RANGES_MAX_BIPOLAR_10V }
};
-#define ts5500_adc_test_bit(bit, map) (test_bit(bit, map) != 0)
+/* Polarity/Range coefficients to scale raw conversion reading */
+#define TS5500_ADC_SCALE_UNIPOLAR_5V 12207
+#define TS5500_ADC_SCALE_UNIPOLAR_10V 24414
+#define TS5500_ADC_SCALE_BIPOLAR_5V 24414
+#define TS5500_ADC_SCALE_BIPOLAR_10V 48828
+
+static const int ts5500_adc_scales[2][2] = {
+ { TS5500_ADC_SCALE_UNIPOLAR_5V, TS5500_ADC_SCALE_UNIPOLAR_10V },
+ { TS5500_ADC_SCALE_BIPOLAR_5V, TS5500_ADC_SCALE_BIPOLAR_10V }
+};
/**
* struct ts5500_adc_chip
* @hwmon_dev: The hwmon device.
* @lock: Read/Write mutex.
- * @spec: The mapped MAX197 platform data.
* @polarity: bitmap for polarity.
* @range: bitmap for range.
*/
struct ts5500_adc_chip {
struct device *hwmon_dev;
struct mutex lock;
- struct ts5500_adc_platform_data spec;
DECLARE_BITMAP(polarity, TS5500_ADC_CHANNELS_MAX);
DECLARE_BITMAP(range, TS5500_ADC_CHANNELS_MAX);
};
@@ -122,7 +127,7 @@ static s32 ts5500_adc_scale(struct ts5500_adc_chip *chip, s16 raw,
{
s32 scaled = raw;
- scaled *= chip->spec.scale[polarity][range];
+ scaled *= ts5500_adc_scales[polarity][range];
scaled /= 10000;
return scaled;
@@ -132,22 +137,8 @@ static int ts5500_adc_range(struct ts5500_adc_chip *chip, int is_min,
int polarity, int range)
{
if (is_min)
- return chip->spec.ranges.min[polarity][range];
- return chip->spec.ranges.max[polarity][range];
-}
-
-static int ts5500_adc_strtol(const char *buf, long *value, int range1,
- int range2)
-{
- if (strict_strtol(buf, 10, value))
- return -EINVAL;
-
- if (range1 < range2)
- *value = SENSORS_LIMIT(*value, range1, range2);
- else
- *value = SENSORS_LIMIT(*value, range2, range1);
-
- return 0;
+ return ts5500_adc_ranges_min[polarity][range];
+ return ts5500_adc_ranges_max[polarity][range];
}
static struct ts5500_adc_chip *ts5500_adc_get_drvdata(struct device *dev)
@@ -166,14 +157,14 @@ static ssize_t ts5500_adc_show_range(struct device *dev,
{
struct ts5500_adc_chip *chip = ts5500_adc_get_drvdata(dev);
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
- int is_min = attr->nr != 0;
+ int is_min = !!attr->nr;
int polarity, range;
if (mutex_lock_interruptible(&chip->lock))
return -ERESTARTSYS;
- polarity = ts5500_adc_test_bit(attr->index, chip->polarity);
- range = ts5500_adc_test_bit(attr->index, chip->range);
+ polarity = !!test_bit(attr->index, chip->polarity);
+ range = !!test_bit(attr->index, chip->range);
mutex_unlock(&chip->lock);
@@ -198,9 +189,14 @@ static ssize_t ts5500_adc_store_range(struct device *dev,
int range2 = ts5500_adc_range(chip, is_min, 1, 1);
long value;
- if (ts5500_adc_strtol(buf, &value, range1, range2))
+ if (kstrtol(buf, 10, &value))
return -EINVAL;
+ if (range1 < range2)
+ value = SENSORS_LIMIT(value, range1, range2);
+ else
+ value = SENSORS_LIMIT(value, range2, range1);
+
if (mutex_lock_interruptible(&chip->lock))
return -ERESTARTSYS;
@@ -240,24 +236,23 @@ static ssize_t ts5500_adc_show_input(struct device *dev,
if (mutex_lock_interruptible(&chip->lock))
return -ERESTARTSYS;
- polarity = ts5500_adc_test_bit(attr->index, chip->polarity);
- range = ts5500_adc_test_bit(attr->index, chip->range);
+ polarity = !!test_bit(attr->index, chip->polarity);
+ range = !!test_bit(attr->index, chip->range);
- command = attr->index | chip->spec.ctrl[polarity][range];
+ command = attr->index | ts5500_adc_ctrl[polarity][range];
- outb(command, chip->spec.ioaddr.data);
+ outb(command, TS5500_ADC_INIT_LSB_REG);
- udelay(chip->spec.read.delay);
- ret = inb(chip->spec.ioaddr.ctrl);
+ udelay(TS5500_ADC_READ_DELAY);
+ ret = inb(TS5500_ADC_CTRL_REG);
- if (ret & chip->spec.read.busy_mask) {
- dev_err(dev, "device not ready (ret=0x0%x, try=%d)\n", ret,
- range);
+ if (ret & TS5500_ADC_READ_BUSY_MASK) {
+ dev_err(dev, "device not ready\n");
ret = -EIO;
} else {
/* LSB of conversion is at 0x196 and MSB is at 0x197 */
- u8 lsb = inb(chip->spec.ioaddr.data);
- u8 msb = inb(chip->spec.ioaddr.data + 1);
+ u8 lsb = inb(TS5500_ADC_INIT_LSB_REG);
+ u8 msb = inb(TS5500_ADC_INIT_LSB_REG + 1);
s16 raw = (msb << 8) | lsb;
s32 scaled = ts5500_adc_scale(chip, raw, polarity, range);
@@ -271,18 +266,18 @@ static ssize_t ts5500_adc_show_input(struct device *dev,
static ssize_t ts5500_adc_show_name(struct device *dev,
struct device_attribute *devattr, char *buf)
{
- return sprintf(buf, "%s\n", ts5500_adc_get_drvdata(dev)->spec.name);
+ return sprintf(buf, "%s\n", TS5500_ADC_NAME);
}
-#define TS5500_ADC_HWMON_CHANNEL(chan) \
- SENSOR_DEVICE_ATTR(in##chan##_input, S_IRUGO, \
- ts5500_adc_show_input, NULL, chan); \
- SENSOR_DEVICE_ATTR_2(in##chan##_max, S_IRUGO | S_IWUSR, \
- ts5500_adc_show_range, \
- ts5500_adc_store_range, 0, chan); \
- SENSOR_DEVICE_ATTR_2(in##chan##_min, S_IRUGO | S_IWUSR, \
- ts5500_adc_show_range, \
- ts5500_adc_store_range, 1, chan) \
+#define TS5500_ADC_HWMON_CHANNEL(chan) \
+ static SENSOR_DEVICE_ATTR(in##chan##_input, S_IRUGO, \
+ ts5500_adc_show_input, NULL, chan); \
+ static SENSOR_DEVICE_ATTR_2(in##chan##_max, S_IRUGO | S_IWUSR, \
+ ts5500_adc_show_range, \
+ ts5500_adc_store_range, 0, chan); \
+ static SENSOR_DEVICE_ATTR_2(in##chan##_min, S_IRUGO | S_IWUSR, \
+ ts5500_adc_show_range, \
+ ts5500_adc_store_range, 1, chan)
#define TS5500_ADC_SYSFS_CHANNEL(chan) \
&sensor_dev_attr_in##chan##_input.dev_attr.attr, \
@@ -291,14 +286,14 @@ static ssize_t ts5500_adc_show_name(struct device *dev,
static DEVICE_ATTR(name, S_IRUGO, ts5500_adc_show_name, NULL);
-static TS5500_ADC_HWMON_CHANNEL(0);
-static TS5500_ADC_HWMON_CHANNEL(1);
-static TS5500_ADC_HWMON_CHANNEL(2);
-static TS5500_ADC_HWMON_CHANNEL(3);
-static TS5500_ADC_HWMON_CHANNEL(4);
-static TS5500_ADC_HWMON_CHANNEL(5);
-static TS5500_ADC_HWMON_CHANNEL(6);
-static TS5500_ADC_HWMON_CHANNEL(7);
+TS5500_ADC_HWMON_CHANNEL(0);
+TS5500_ADC_HWMON_CHANNEL(1);
+TS5500_ADC_HWMON_CHANNEL(2);
+TS5500_ADC_HWMON_CHANNEL(3);
+TS5500_ADC_HWMON_CHANNEL(4);
+TS5500_ADC_HWMON_CHANNEL(5);
+TS5500_ADC_HWMON_CHANNEL(6);
+TS5500_ADC_HWMON_CHANNEL(7);
static const struct attribute_group ts5500_adc_sysfs_group = {
.attrs = (struct attribute *[]) {
@@ -317,44 +312,34 @@ static const struct attribute_group ts5500_adc_sysfs_group = {
static int __devinit ts5500_adc_probe(struct platform_device *pdev)
{
- struct ts5500_adc_platform_data *pdata = pdev->dev.platform_data;
struct ts5500_adc_chip *chip;
int ret;
- if (pdata == NULL)
- return -ENODEV;
-
chip = kzalloc(sizeof *chip, GFP_KERNEL);
if (!chip)
return -ENOMEM;
- chip->spec = *pdata;
-
mutex_init(&chip->lock);
- mutex_lock(&chip->lock);
+ platform_set_drvdata(pdev, chip);
ret = sysfs_create_group(&pdev->dev.kobj, &ts5500_adc_sysfs_group);
if (ret) {
- dev_err(&pdev->dev, "sysfs_create_group failed.\n");
- goto error_unlock_and_free;
+ dev_err(&pdev->dev, "sysfs_create_group failed\n");
+ goto error_free;
}
chip->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(chip->hwmon_dev)) {
- dev_err(&pdev->dev, "hwmon_device_register failed.\n");
+ dev_err(&pdev->dev, "hwmon_device_register failed\n");
ret = PTR_ERR(chip->hwmon_dev);
goto error_unregister_device;
}
- platform_set_drvdata(pdev, chip);
- mutex_unlock(&chip->lock);
return 0;
error_unregister_device:
sysfs_remove_group(&pdev->dev.kobj, &ts5500_adc_sysfs_group);
-
-error_unlock_and_free:
- mutex_unlock(&chip->lock);
+error_free:
kfree(chip);
return ret;
}
@@ -379,58 +364,23 @@ static struct resource ts5500_adc_resources[] = {
}
};
-static struct ts5500_adc_platform_data ts5500_adc_platform_data = {
- .name = TS5500_ADC_NAME,
- .ioaddr = {
- .data = TS5500_ADC_INIT_LSB_REG,
- .ctrl = TS5500_ADC_CTRL_REG,
- },
- .read = {
- .delay = TS5500_ADC_READ_DELAY,
- .busy_mask = TS5500_ADC_READ_BUSY_MASK,
- },
- .ctrl = {
- { TS5500_ADC_UNIPOLAR | TS5500_ADC_RANGE_5V,
- TS5500_ADC_UNIPOLAR | TS5500_ADC_RANGE_10V },
- { TS5500_ADC_BIPOLAR | TS5500_ADC_RANGE_5V,
- TS5500_ADC_BIPOLAR | TS5500_ADC_RANGE_10V },
- },
- .ranges = {
- .min = {
- { 0, 0 },
- { -5000, -10000 },
- },
- .max = {
- { 5000, 10000 },
- { 5000, 10000 },
- },
- },
- .scale = {
- { 12207, 24414 },
- { 24414, 48828 },
- },
-};
-
static struct platform_device ts5500_adc_device = {
.name = "ts5500_adc",
.id = -1,
.resource = ts5500_adc_resources,
.num_resources = ARRAY_SIZE(ts5500_adc_resources),
.dev = {
- .platform_data = &ts5500_adc_platform_data,
- .release = ts5500_adc_release,
- },
+ .release = ts5500_adc_release
+ }
};
static int __devexit ts5500_adc_remove(struct platform_device *pdev)
{
struct ts5500_adc_chip *chip = platform_get_drvdata(pdev);
- mutex_lock(&chip->lock);
hwmon_device_unregister(chip->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &ts5500_adc_sysfs_group);
platform_set_drvdata(pdev, NULL);
- mutex_unlock(&chip->lock);
kfree(chip);
return 0;
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists