| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <B567DBAB974C0544994013492B949F8E3812CD3805@EXMAIL03.scwf.nsc.com>
Date: Sat, 21 Jan 2012 10:08:49 -0800
From: "Kim, Milo" <Milo.Kim@...com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"rpurdie@...ys.net" <rpurdie@...ys.net>
Subject: RE: [PATCH] leds-lp5521: additional platform data and
attributes
Please ignore this patch message. The patch will be splitted.
-----Original Message-----
From: Kim, Milo
Sent: Monday, January 16, 2012 3:31 PM
To: 'linux-kernel@...r.kernel.org'; 'rpurdie@...ys.net'
Cc: 'linaro-dev@...ts.linaro.org'; 'milo.kim@...com'
Subject: RE: [PATCH] leds-lp5521: additional platform data and attributes
For better readability, values of LP5521_REG_ENABLE register were redefined.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@...com>
---
drivers/leds/leds-lp5521.c | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 8239319..3f7cfe8 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -261,8 +261,7 @@ static int lp5521_configure(struct i2c_client *client)
/* Set engines are set to run state when OP_MODE enables engines */
ret |= lp5521_write(client, LP5521_REG_ENABLE,
- LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
- LP5521_EXEC_RUN);
+ LP5521_ENABLE_RUN_PROGRAM);
/* enable takes 500us. 1 - 2 ms leaves some margin */
usleep_range(1000, 2000);
@@ -313,8 +312,7 @@ static int lp5521_detect(struct i2c_client *client)
int ret;
u8 buf;
- ret = lp5521_write(client, LP5521_REG_ENABLE,
- LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+ ret = lp5521_write(client, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
if (ret)
return ret;
/* enable takes 500us. 1 - 2 ms leaves some margin */
@@ -322,7 +320,7 @@ static int lp5521_detect(struct i2c_client *client)
ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
if (ret)
return ret;
- if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+ if (buf != LP5521_ENABLE_DEFAULT)
return -ENODEV;
return 0;
--
1.7.4.1
-----Original Message-----
From: Kim, Milo
Sent: Friday, January 06, 2012 11:20 AM
To: 'linux-kernel@...r.kernel.org'; 'rpurdie@...ys.net'
Cc: 'linaro-dev@...ts.linaro.org'; 'milo.kim@...com'
Subject: [PATCH] leds-lp5521: additional platform data and attributes
* Changes of lp5521_platform_data
> 'update_config' is added
> 'name' is added
Value of CONFIG register(Addr 08h) and name of led channels are dependant on the project.
So these fields have been added in lp5521_platform_data.
> led pattern data
lp5521 has autonomous operation mode without external control.
This patch includes how to configure the led patterns and load them.
* Additional led class device attributes : delay_on, delay_off, blink
For supporting blink mode, 3 attributes have been updated.
* Additional i2c device attribute : led_pattern
Platform specific led pattern can be loaded via the user-space.
* Base kernel version : 3.0.9
Signed-off-by: Milo(Woogyom) Kim <milo.kim@...com>
---
Documentation/leds/leds-lp5521.txt | 60 ++++++++++
drivers/leds/leds-lp5521.c | 222 +++++++++++++++++++++++++++++++++---
include/linux/leds-lp5521.h | 25 ++++
3 files changed, 289 insertions(+), 18 deletions(-)
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
index c4d8d15..b0d6abe 100644
--- a/Documentation/leds/leds-lp5521.txt
+++ b/Documentation/leds/leds-lp5521.txt
@@ -3,6 +3,7 @@ Kernel driver for lp5521
* National Semiconductor LP5521 led driver chip
* Datasheet: http://www.national.com/pf/LP/LP5521.html
+ or http://www.ti.com/product/lp5521
Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
@@ -43,17 +44,23 @@ Format: 10x mA i.e 10 means 1.0 mA
example platform data:
Note: chan_nr can have values between 0 and 2.
+Each channel can have own name.
+If name field is not defined, the default name will be set to 'xxxx:channelN'
+(XXXX : pdata->label or i2c client name, N : channel number)
static struct lp5521_led_config lp5521_led_config[] = {
{
+ .name = "red",
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
}, {
+ .name = "green",
.chan_nr = 1,
.led_current = 0,
.max_current = 130,
}, {
+ .name = "blue",
.chan_nr = 2,
.led_current = 0,
.max_current = 130,
@@ -86,3 +93,56 @@ static struct lp5521_platform_data lp5521_platform_data = {
If the current is set to 0 in the platform data, that channel is
disabled and it is not visible in the sysfs.
+
+update_config : CONFIG register (ADDR 08h)
+This value is platform-specific data. If NULL, the default value will be set.
+
+example)
+
+#define LP5521_CONFIGS (LP5521_PWM_HF | LP5521_PWRSAVE_EN | \
+ LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \
+ LP5521_CLK_INT)
+
+static struct lp5521_platform_data lp5521_pdata = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_INT,
+ .update_config = LP5521_CONFIGS,
+};
+
+LED patterns : LP5521 has autonomous operation without external control.
+Pattern data can be defined in the platform data.
+
+example)
+/* Pattern : RGB(50,5,0) 500ms on, 500ms off, infinite loop */
+static u8 pattern_red[] = {
+ 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
+ };
+
+static u8 pattern_green[] = {
+ 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
+ };
+
+static struct lp5521_led_pattern board_led_patterns[] = {
+ {
+ .r = pattern_r,
+ .g = pattern_g,
+ .size_r = ARRAY_SIZE(pattern_r),
+ .size_g = ARRAY_SIZE(pattern_g),
+ },
+};
+
+static struct lp5521_platform_data lp5521_platform_data = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_EXT,
+ .patterns = board_led_patterns,
+ .num_patterns = ARRAY_SIZE(board_led_patterns),
+};
+
+Then the predefined led pattern can be executed via the user-space.
+To start the pattern #1,
+# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern
+(xxxx : i2c bus & slave address)
+To end the pattern,
+# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index cc1dc48..8239319 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -80,23 +80,23 @@
/* Bits in ENABLE register */
#define LP5521_MASTER_ENABLE 0x40 /* Chip master enable */
#define LP5521_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
+#define LP5521_EXEC_MASK 0xC0
#define LP5521_EXEC_RUN 0x2A
-
-/* Bits in CONFIG register */
-#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */
-#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
-#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
-#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */
-#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
-#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */
-#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
-#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */
-#define LP5521_CLK_INT 1 /* Internal clock */
-#define LP5521_CLK_AUTO 2 /* Automatic clock selection */
+#define LP5521_EXEC_HOLD 0x00
+#define LP5521_ENABLE_DEFAULT \
+ (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM)
+#define LP5521_ENABLE_RUN_PROGRAM \
+ (LP5521_ENABLE_DEFAULT | LP5521_EXEC_RUN)
/* Status */
#define LP5521_EXT_CLK_USED 0x08
+/* Blink mode */
+#define ALWAYS_OFF 0
+
+/* Pattern Mode */
+#define PATTERN_OFF 0
+
struct lp5521_engine {
int id;
u8 mode;
@@ -112,6 +112,8 @@ struct lp5521_led {
struct led_classdev cdev;
struct work_struct brightness_work;
u8 brightness;
+ int delay_on;
+ int delay_off;
};
struct lp5521_chip {
@@ -237,6 +239,7 @@ static void lp5521_init_engine(struct lp5521_chip *chip)
static int lp5521_configure(struct i2c_client *client)
{
struct lp5521_chip *chip = i2c_get_clientdata(client);
+ u8 cfg = chip->pdata->update_config;
int ret;
lp5521_init_engine(chip);
@@ -244,9 +247,12 @@ static int lp5521_configure(struct i2c_client *client)
/* Set all PWMs to direct control mode */
ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
- /* Enable auto-powersave, set charge pump to auto, red to battery */
- ret |= lp5521_write(client, LP5521_REG_CONFIG,
- LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+ if (cfg)
+ ret |= lp5521_write(client, LP5521_REG_CONFIG, cfg);
+ else
+ ret |= lp5521_write(client, LP5521_REG_CONFIG,
+ LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO |
+ LP5521_R_TO_BATT);
/* Initialize all channels PWM to zero -> leds off */
ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
@@ -533,13 +539,184 @@ static ssize_t lp5521_selftest(struct device *dev,
return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
}
+static void lp5521_clear_program_memory(struct i2c_client *cl)
+{
+ int i;
+ u8 rgb_mem[] = {
+ LP5521_REG_R_PROG_MEM,
+ LP5521_REG_G_PROG_MEM,
+ LP5521_REG_B_PROG_MEM,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
+ lp5521_write(cl, rgb_mem[i], 0);
+ lp5521_write(cl, rgb_mem[i] + 1, 0);
+ }
+}
+
+static void lp5521_write_program_memory(struct i2c_client *cl,
+ u8 base, u8 *rgb, int size)
+{
+ int i;
+
+ if (!rgb || size <= 0)
+ return;
+
+ for (i = 0; i < size; i++)
+ lp5521_write(cl, base + i, *(rgb + i));
+
+ lp5521_write(cl, base + i, 0);
+ lp5521_write(cl, base + i + 1, 0);
+}
+
+static inline struct lp5521_led_pattern *lp5521_get_pattern
+ (struct lp5521_chip *chip, u8 offset)
+{
+ struct lp5521_led_pattern *pattern;
+ pattern = chip->pdata->patterns + (offset - 1);
+ return pattern;
+}
+
+static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
+{
+ struct lp5521_led_pattern *ptn;
+ struct i2c_client *cl = chip->client;
+ u8 num_patterns = chip->pdata->num_patterns;
+
+ if (mode > num_patterns || !(chip->pdata->patterns))
+ return;
+
+ if (mode == PATTERN_OFF) {
+ lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_DEFAULT);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ } else {
+ ptn = lp5521_get_pattern(chip, mode);
+ if (!ptn)
+ return;
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+ usleep_range(1000, 2000);
+
+ lp5521_clear_program_memory(cl);
+
+ lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
+ ptn->r, ptn->size_r);
+ lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
+ ptn->g, ptn->size_g);
+ lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
+ ptn->b, ptn->size_b);
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_ENABLE, LP5521_ENABLE_RUN_PROGRAM);
+ }
+}
+
+static ssize_t store_led_pattern(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 16, &val);
+ if (ret)
+ return ret;
+
+ lp5521_run_led_pattern(val, chip);
+
+ return len;
+}
+
+static ssize_t show_delay_on(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->delay_on);
+}
+
+static ssize_t store_delay_on(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ led->delay_on = (int)curr;
+
+ return len;
+}
+
+static ssize_t show_delay_off(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+
+ return sprintf(buf, "%d\n", led->delay_off);
+}
+
+static ssize_t store_delay_off(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+ unsigned long curr;
+
+ if (strict_strtoul(buf, 0, &curr))
+ return -EINVAL;
+
+ led->delay_off = (int)curr;
+
+ return len;
+}
+
+static ssize_t store_blink(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct lp5521_led *led = cdev_to_led(led_cdev);
+ unsigned long is_blink_set;
+ unsigned long on = led->delay_on;
+ unsigned long off = led->delay_off;
+
+ if (strict_strtoul(buf, 0, &is_blink_set))
+ return -EINVAL;
+
+ if (!is_blink_set)
+ on = ALWAYS_OFF;
+
+ led_blink_set(led_cdev, &on, &off);
+
+ return len;
+}
+
/* led class device attributes */
static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+static DEVICE_ATTR(delay_on, S_IRUGO | S_IWUSR, show_delay_on, store_delay_on);
+static DEVICE_ATTR(delay_off, S_IRUGO | S_IWUSR, show_delay_off,
+ store_delay_off);
+static DEVICE_ATTR(blink, S_IWUSR, NULL, store_blink);
static struct attribute *lp5521_led_attributes[] = {
&dev_attr_led_current.attr,
&dev_attr_max_current.attr,
+ &dev_attr_delay_on.attr,
+ &dev_attr_delay_off.attr,
+ &dev_attr_blink.attr,
NULL,
};
@@ -558,6 +735,7 @@ static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
static struct attribute *lp5521_attributes[] = {
&dev_attr_engine1_mode.attr,
@@ -567,6 +745,7 @@ static struct attribute *lp5521_attributes[] = {
&dev_attr_engine1_load.attr,
&dev_attr_engine2_load.attr,
&dev_attr_engine3_load.attr,
+ &dev_attr_led_pattern.attr,
NULL
};
@@ -617,10 +796,16 @@ static int __devinit lp5521_init_led(struct lp5521_led *led,
return -EINVAL;
}
- snprintf(name, sizeof(name), "%s:channel%d",
- pdata->label ?: client->name, chan);
led->cdev.brightness_set = lp5521_set_brightness;
- led->cdev.name = name;
+
+ if (pdata->led_config[chan].name) {
+ led->cdev.name = pdata->led_config[chan].name;
+ } else {
+ snprintf(name, sizeof(name), "%s:channel%d",
+ pdata->label ?: client->name, chan);
+ led->cdev.name = name;
+ }
+
res = led_classdev_register(dev, &led->cdev);
if (res < 0) {
dev_err(dev, "couldn't register led on channel %d\n", chan);
@@ -749,6 +934,7 @@ static int lp5521_remove(struct i2c_client *client)
struct lp5521_chip *chip = i2c_get_clientdata(client);
int i;
+ lp5521_run_led_pattern(PATTERN_OFF, chip);
lp5521_unregister_sysfs(client);
for (i = 0; i < chip->num_leds; i++) {
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
index fd548d2..c842527 100644
--- a/include/linux/leds-lp5521.h
+++ b/include/linux/leds-lp5521.h
@@ -26,23 +26,48 @@
/* See Documentation/leds/leds-lp5521.txt */
struct lp5521_led_config {
+ char *name;
u8 chan_nr;
u8 led_current; /* mA x10, 0 if led is not connected */
u8 max_current;
};
+struct lp5521_led_pattern {
+ u8 *r;
+ u8 *g;
+ u8 *b;
+ u8 size_r;
+ u8 size_g;
+ u8 size_b;
+};
+
#define LP5521_CLOCK_AUTO 0
#define LP5521_CLOCK_INT 1
#define LP5521_CLOCK_EXT 2
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF 0x40 /* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN 0x20 /* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF 0 /* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS 8 /* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5 0x10 /* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO 0x18 /* Automatic mode selection */
+#define LP5521_R_TO_BATT 4 /* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT 0 /* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT 1 /* Internal clock */
+#define LP5521_CLK_AUTO 2 /* Automatic clock selection */
+
struct lp5521_platform_data {
struct lp5521_led_config *led_config;
u8 num_channels;
u8 clock_mode;
+ u8 update_config;
int (*setup_resources)(void);
void (*release_resources)(void);
void (*enable)(bool state);
const char *label;
+ struct lp5521_led_pattern *patterns;
+ u8 num_patterns;
};
#endif /* __LINUX_LP5521_H */
--
1.7.4.1
Best Regards
Milo (Woogyom) Kim
Texas Instruments Incorporated
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists