| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <B567DBAB974C0544994013492B949F8E3812CD3808@EXMAIL03.scwf.nsc.com>
Date: Sat, 21 Jan 2012 10:09:36 -0800
From: "Kim, Milo" <Milo.Kim@...com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"rpurdie@...ys.net" <rpurdie@...ys.net>
Subject: [PATCH 3/4] leds-lp5521: support led pattern data
The lp5521 has autonomous operation mode without external control.
Using lp5521_platform_data, various led patterns can be configurable.
For supporting this feature, new functions and device attribute are added.
Structure of lp5521_led_pattern: 3 channels are supported - red, green and blue.
Pattern(s) of each channel and numbers of pattern(s) are defined in the platform data.
Pattern data are hexa codes which include pattern commands such like
set pwm, wait, ramp up/down, branch and so on.
Pattern mode functions:
* lp5521_clear_program_memory
Before running new led pattern, program memory should be cleared.
* lp5521_write_program_memory
Pattern data updated in the program memory via the i2c.
* lp5521_get_pattern
Get pattern from predefined in the platform data.
* lp5521_run_led_pattern
Stop current pattern or run new pattern.
Transition time is required between different operation mode.
Device attribute - 'led_pattern':
To load specific led pattern, new device attribute is added.
When the lp5521 driver is unloaded, stop current led pattern mode.
Documentation updated : description about how to define the led patterns and example.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@...com>
---
Documentation/leds/leds-lp5521.txt | 38 ++++++++++++++
drivers/leds/leds-lp5521.c | 100 ++++++++++++++++++++++++++++++++++++
include/linux/leds-lp5521.h | 11 ++++
3 files changed, 149 insertions(+), 0 deletions(-)
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
index e3c66c6..0e542ab 100644
--- a/Documentation/leds/leds-lp5521.txt
+++ b/Documentation/leds/leds-lp5521.txt
@@ -111,3 +111,41 @@ static struct lp5521_platform_data lp5521_pdata = {
.clock_mode = LP5521_CLOCK_INT,
.update_config = LP5521_CONFIGS,
};
+
+LED patterns : LP5521 has autonomous operation without external control.
+Pattern data can be defined in the platform data.
+
+example of led pattern data :
+
+/* RGB(50,5,0) 500ms on, 500ms off, infinite loop */
+static u8 pattern_red[] = {
+ 0x40, 0x32, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
+ };
+
+static u8 pattern_green[] = {
+ 0x40, 0x05, 0x60, 0x00, 0x40, 0x00, 0x60, 0x00,
+ };
+
+static struct lp5521_led_pattern board_led_patterns[] = {
+ {
+ .r = pattern_red,
+ .g = pattern_green,
+ .size_r = ARRAY_SIZE(pattern_red),
+ .size_g = ARRAY_SIZE(pattern_green),
+ },
+};
+
+static struct lp5521_platform_data lp5521_platform_data = {
+ .led_config = lp5521_led_config,
+ .num_channels = ARRAY_SIZE(lp5521_led_config),
+ .clock_mode = LP5521_CLOCK_EXT,
+ .patterns = board_led_patterns,
+ .num_patterns = ARRAY_SIZE(board_led_patterns),
+};
+
+Then predefined led pattern(s) can be executed via the sysfs.
+To start the pattern #1,
+# echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern
+(xxxx : i2c bus & slave address)
+To end the pattern,
+# echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 4fa792d..471cef1 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -85,6 +85,9 @@
/* Status */
#define LP5521_EXT_CLK_USED 0x08
+/* Pattern Mode */
+#define PATTERN_OFF 0
+
struct lp5521_engine {
int id;
u8 mode;
@@ -522,6 +525,100 @@ static ssize_t lp5521_selftest(struct device *dev,
return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
}
+static void lp5521_clear_program_memory(struct i2c_client *cl)
+{
+ int i;
+ u8 rgb_mem[] = {
+ LP5521_REG_R_PROG_MEM,
+ LP5521_REG_G_PROG_MEM,
+ LP5521_REG_B_PROG_MEM,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
+ lp5521_write(cl, rgb_mem[i], 0);
+ lp5521_write(cl, rgb_mem[i] + 1, 0);
+ }
+}
+
+static void lp5521_write_program_memory(struct i2c_client *cl,
+ u8 base, u8 *rgb, int size)
+{
+ int i;
+
+ if (!rgb || size <= 0)
+ return;
+
+ for (i = 0; i < size; i++)
+ lp5521_write(cl, base + i, *(rgb + i));
+
+ lp5521_write(cl, base + i, 0);
+ lp5521_write(cl, base + i + 1, 0);
+}
+
+static inline struct lp5521_led_pattern *lp5521_get_pattern
+ (struct lp5521_chip *chip, u8 offset)
+{
+ struct lp5521_led_pattern *ptn;
+ ptn = chip->pdata->patterns + (offset - 1);
+ return ptn;
+}
+
+static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
+{
+ struct lp5521_led_pattern *ptn;
+ struct i2c_client *cl = chip->client;
+ int num_patterns = chip->pdata->num_patterns;
+
+ if (mode > num_patterns || !(chip->pdata->patterns))
+ return;
+
+ if (mode == PATTERN_OFF) {
+ lp5521_write(cl, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ } else {
+ ptn = lp5521_get_pattern(chip, mode);
+ if (!ptn)
+ return;
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+ usleep_range(1000, 2000);
+
+ lp5521_clear_program_memory(cl);
+
+ lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
+ ptn->r, ptn->size_r);
+ lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
+ ptn->g, ptn->size_g);
+ lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
+ ptn->b, ptn->size_b);
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+ LP5521_EXEC_RUN);
+ }
+}
+
+static ssize_t store_led_pattern(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 16, &val);
+ if (ret)
+ return ret;
+
+ lp5521_run_led_pattern(val, chip);
+
+ return len;
+}
+
/* led class device attributes */
static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
@@ -547,6 +644,7 @@ static DEVICE_ATTR(engine1_load, S_IWUSR, NULL, store_engine1_load);
static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
static struct attribute *lp5521_attributes[] = {
&dev_attr_engine1_mode.attr,
@@ -556,6 +654,7 @@ static struct attribute *lp5521_attributes[] = {
&dev_attr_engine1_load.attr,
&dev_attr_engine2_load.attr,
&dev_attr_engine3_load.attr,
+ &dev_attr_led_pattern.attr,
NULL
};
@@ -743,6 +842,7 @@ static int lp5521_remove(struct i2c_client *client)
struct lp5521_chip *chip = i2c_get_clientdata(client);
int i;
+ lp5521_run_led_pattern(PATTERN_OFF, chip);
lp5521_unregister_sysfs(client);
for (i = 0; i < chip->num_leds; i++) {
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
index e9ab583..3f071ec 100644
--- a/include/linux/leds-lp5521.h
+++ b/include/linux/leds-lp5521.h
@@ -32,6 +32,15 @@ struct lp5521_led_config {
u8 max_current;
};
+struct lp5521_led_pattern {
+ u8 *r;
+ u8 *g;
+ u8 *b;
+ u8 size_r;
+ u8 size_g;
+ u8 size_b;
+};
+
#define LP5521_CLOCK_AUTO 0
#define LP5521_CLOCK_INT 1
#define LP5521_CLOCK_EXT 2
@@ -57,6 +66,8 @@ struct lp5521_platform_data {
void (*enable)(bool state);
const char *label;
u8 update_config;
+ struct lp5521_led_pattern *patterns;
+ int num_patterns;
};
#endif /* __LINUX_LP5521_H */
--
1.7.4.1
Best Regards,
Milo (Woogyom) Kim
Texas Instruments Incorporated
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists