linux-kernel - Re: Pinmux bindings proposal V2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20120130172042.GE9339@atomide.com>
Date:	Mon, 30 Jan 2012 09:20:42 -0800
From:	Tony Lindgren <tony@...mide.com>
To:	Shawn Guo <shawn.guo@...aro.org>
Cc:	Stephen Warren <swarren@...dia.com>,
	Dong Aisheng <dongas86@...il.com>,
	"devicetree-discuss@...ts.ozlabs.org" 
	<devicetree-discuss@...ts.ozlabs.org>,
	"Linus Walleij (linus.walleij@...aro.org)" <linus.walleij@...aro.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
	"Grant Likely (grant.likely@...retlab.ca)" 
	<grant.likely@...retlab.ca>,
	Thomas Abraham <thomas.abraham@...aro.org>,
	"kernel@...gutronix.de" <kernel@...gutronix.de>,
	"Simon Glass (sjg@...omium.org)" <sjg@...omium.org>,
	"cjb@...top.org" <cjb@...top.org>,
	Dong Aisheng-B29396 <B29396@...escale.com>,
	"Sascha Hauer (s.hauer@...gutronix.de)" <s.hauer@...gutronix.de>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: Pinmux bindings proposal V2

* Shawn Guo <shawn.guo@...aro.org> [120129 17:13]:
> On Fri, Jan 27, 2012 at 09:05:45AM -0800, Tony Lindgren wrote:
> > Hi,
> > 
> > * Shawn Guo <shawn.guo@...aro.org> [120126 22:15]:
> > > On Thu, Jan 26, 2012 at 06:08:33PM -0800, Tony Lindgren wrote:
> > > > * Stephen Warren <swarren@...dia.com> [120126 11:03]:
> > > ...
> > > > > Second, as I mentioned before, while some of the states are certainly
> > > > > PM-related, I don't think all will be, e.g. the case of running an SD
> > > > > controller at different clock rates to the SD card, and needing to
> > > > > set different pin parameters based on the clock rate. Is runtime PM
> > > > > intended cover that kind of thing? The idea here is that the common
> > > > > pinctrl binding can allow the driver to require different named states
> > > > > for those different clock rate cases.
> > > > 
> > > > For the PM related states, those should be Linux generic. For rate
> > > > setting sounds like that's really something you should set up as clocks
> > > > in the Tegra wrapper driver for SDHCI?
> > > > 
> > > That's right.
> > > 
> > > > Ideally the SDHCI driver would be completely arch independent, and
> > > > then the SoC specific wrapper driver would know how to communicate to
> > > > the pinmux/pinconf framwork or clock framework what it needs using
> > > > Linux generic APIs.
> > > 
> > > But that wrapper driver should not be bothered to call pinmux/pinconf
> > > APIs on pin basis to change the pinctrl configuration.  The elegant
> > > way would be something like the following in case that it switches
> > > the bus frequency from 50 MHz to 100 MHz.
> > > 
> > > 	pmx = pinmux_get(dev, "esdhc_50mhz");
> > > 	...
> > > 	pinmux_put(pmx);
> > > 	pmx = pinmux_get(dev, "esdhc_100mhz");
> > > 	...
> > > 
> > > The specific mux and config settings of states esdhc_50mhz and
> > > esdhc_100mhz would be retrieved from device tree.
> > 
> > Yes whatever mux names can be used, same as with clock framework
> > for clock names. But that means you'll have to constantly get/put
> > the mux which is not efficient.
> > 
> The most important reason that we want to move to pinctrl subsystem
> is we need its run-time configuration feature for cases like esdhc
> here.  I do not think the switch here is so constant to be inefficient.
> 
> > Wouldn't it be cleaner to just clk_get esdhc_clk during init, then
> > do clk_set_rate on it to toggle the rates?
> >  
> It's not an init-time switch but run-time one.  That said,
> sdhci_ops.set_clock will be called during run-time.

Right, basically you don't want to do clk_get or pinmux_get during
runtime, you do that once one during init. Then do clk_set_rate or
whaterver during runtime.

Is there anything stopping from implementing sdhci_ops.set_rate
using clock framework and clk_set_rate in this case BTW?
 
> > > > So I'd rather stay out of random named states for
> > > > the pins coming from device tree; If we still need them, they should
> > > > be common bindings rather than things like "xyz_clock_hack".
> > > > 
> > > The binding defines the syntax, and I do not see the necessity to
> > > force the particular state name, which is really pinctrl client
> > > device specific.
> > 
> > Do you have some other custom pin state example other than the
> > clock rate change example above?
> > 
> I have another case PM related.  To aggressively save power, the pins
> configured for particular function during active mode need to be
> muxed on gpio mode and output 0 in low-power mode.

OK, but basically only a small subset of pins of the total pins?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/