| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120130175738.GA4002@phenom.dumpdata.com> Date: Mon, 30 Jan 2012 12:57:38 -0500 From: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com> To: Stephen Hemminger <shemminger@...tta.com> Cc: netdev@...r.kernel.org, davem@...emloft.net, linux-kernel@...r.kernel.org Subject: Re: Regression in skge that started around acb42a3 (so past v3.3-rc1) On Mon, Jan 30, 2012 at 08:38:43AM -0800, Stephen Hemminger wrote: > On Mon, 30 Jan 2012 10:58:16 -0500 > Konrad Rzeszutek Wilk <konrad.wilk@...cle.com> wrote: > > > I hadn't done any git bisection yet, but with acb42a3 I started getting this: > > > > (and only on i686 - x86_64 does not show these): > > > > (This is with Xen, the other one is without) > > [ 28.602121] eth2: no IPv6 routers present > > [ 70.457712] eth2: hw csum failure. > > [ 70.458695] Pid: 0, comm: swapper/0 Not tainted 3.3.0-rc1-00287-gacb42a3 #1 > > [ 70. > > [ 70.458695] [<c140942b>] __skb_checksum_complete+0xb/0x10 > > [ 70.458695] [<c148e3b0>] nf_ip_checksum+0x60/0x120 > > [ 70.458695] [<c143ee6b>] udp_error+0xbb/0x1f0 > > [ 70.458695] [<c103c1e4>] ? check_events+0x8/0xc > > [ 70.458695] [<c103c1db>] ? xen_restore_fl_direct_reloc+0x4/0x4 > > [ 70.458695] [<c11497ee>] ? put_cpu_partial+0x9e/0xb0 > > [ 70.458695] [<c143edb0>] ? udp_pkt_to_tuple+0x60/0x60 > > [ 70.458695] [<c143a2b6>] nf_conntrack_in+0xc6/0x5c0 > > [ 70.458695] [<c14751f8>] ? __udp4_lib_rcv+0x428/0x630 > > [ 70.458695] [<c1149dd0>] ? kfree+0xf0/0x120 > > [ 70.458695] [<c1405b60>] ? skb_release_data+0x90/0xb0 > > [ 70.458695] [<c1405b60>] ? skb_release_data+0x90/0xb0 > > [ 70.458695] [<c14057d8>] ? __kfree_skb+0x38/0x90 > > [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 > > [ 70.458695] [<c148f41e>] ipv4_conntrack_in+0x1e/0x30 > > [ 70.458695] [<c14360d3>] nf_iterate+0x63/0x90 > > [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 > > [ 70.458695] [<c1436292>] nf_hook_slow+0x62/0x140 > > [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 > > [ 70.458695] [<c144dbb5>] ip_rcv+0x235/0x310 > > [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 > > [ 70.458695] [<c1412c36>] __netif_receive_skb+0x1d6/0x550 > > [ 70.458695] [<c147c6a9>] ? inet_gro_receive+0x59/0x1f0 > > [ 70.458695] [<c1413312>] netif_receive_skb+0x22/0x90 > > [ 70.458695] [<c1413487>] napi_skb_finish+0x37/0x50 > > [ 70.458695] [<c14139e3>] napi_gro_receive+0xe3/0xf0 > > [ 70.458695] [<c12ff4c0>] ? xen_swiotlb_map_sg+0x20/0x20 > > [ 70.458695] [<c12ff4d9>] ? xen_swiotlb_unmap_page+0x19/0x20 > > [ 70.458695] [<f7983d6c>] skge_poll+0x34c/0x6f4 [skge] > > [ 70.458695] [<c141431a>] net_rx_action+0xfa/0x2a0 > > [ 70.458695] [<c107cecf>] __do_softirq+0x9f/0x210 > > [ 70.458695] [<c107ce30>] ? irq_exit+0xd0/0xd0 > > [ 70.458695] <IRQ> [<c107ce15>] ? irq_exit+0xb5/0xd0 > > The skge driver uses hardware receive checksum where it computes the sum > of the packet (but does not check it). This kind of problem happens when some > part of the call chain above it updates the packet but does not update the checksum. > A fix like the following is presumably needed for some part of this path. Ah, so you are saying that the problem above is already fixed in 3.3-rc1. OK, so what about the other one that I mentioned in the email: [ 288.735236] IP: [<c127b1aa>] memcpy+0x1a/0x0a4f001 *pde = 0000000000000000 [ 288.735236] Oops: 0000 [#1] PREEMPT SMP [ 288.751724] Modules linked in: dm_multipath dm_mod iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c sg sd_mod ata_generic sata_nv nouveau fbcon tileblit font bitblit e1000 softcursor ttm libata skge drm_kms_helper mxm_wmi video wmi scsi_mod [last unloaded: dump_dma] [ 288.751724] [ 288.751724] Pid: 0, comm: swapper/0 Tainted: G O 3.3.0-rc1-00383-g0a96265 #1 BIOSTAR Group N61PB-M2S/N61PB-M2S [ 288.751724] EIP: 0060:[<c127b1aa>] EFLAGS: 00010217 CPU: 0 [ 288.751724] EIP is at memcpy+0x1a/0x40 [ 288.751724] EAX: f0a11040 EBX: 00000062 ECX: 00000018 EDX: 00000000 [ 288.751724] ESI: 00000000 EDI: f0a11040 EBP: f100bf2c ESP: f100bf20 [ 288.751724] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 288.751724] Process swapper/0 (pid: 0, ti=f100a000 task=c16b1020 task.ti=c16aa000) [ 288.751724] Stack: [ 288.751724] f1297c00 f1086144 f762dd80 f100bf88 f8449ccb 39e70110 00000043 39e70110 [ 288.751724] 00000043 00000000 c176b140 00000002 f100bf98 f0991d80 f1297c00 f11c4060 [ 288.751724] ffff0000 00000040 f1297c08 f1297800 00000000 00000000 00000062 f1297c08 [ 288.751724] Call Trace: [ 288.751724] [<f8449ccb>] skge_poll+0x2ab/0x6f4 [skge] [ 288.751724] [<c1413dba>] net_rx_action+0xfa/0x2a0 [ 288.751724] [<c107cecf>] __do_softirq+0x9f/0x210 [ 288.751724] [<c107ce30>] ? irq_exit+0xd0/0xd0 [ 288.751724] <IRQ> [ 288.751724] [<c107ce15>] ? irq_exit+0xb5/0xd0 [ 288.751724] [<c1045e06>] ? do_IRQ+0x46/0xb0 [ 288.751724] [<c107cdc1>] ? irq_exit+0x61/0xd0 [ 288.751724] [<c105fb23>] ? smp_apic_timer_interrupt+0x53/0x90 [ 288.751724] [<c153abb0>] ? common_interrupt+0x30/0x38 [ 288.751724] [<c10685f5>] ? native_safe_halt+0x5/0x10 [ 288.751724] [<c104c53d>] ? default_idle+0xfd/0x200 [ 288.751724] [<c104c68c>] ? amd_e400_idle+0x4c/0x100 [ 288.751724] [<c1043fd8>] ? cpu_idle+0xa8/0xf0 [ 288.751724] [<c151602b>] ? rest_init+0x7b/0x80 [ 288.751724] [<c16f686d>] ? start_kernel+0x348/0x34e [ 288.751724] [<c16f634f>] ? kernel_init+0x149/0x149 [ 288.751724] [<c16f60ba>] ? i386_start_kernel+0xa9/0xb0 [ 288.751724] Code: c6 43 4c 04 88 43 4d 8b 1c 24 89 ec 5d c3 90 90 90 55 89 e5 83 ec 0c 89 1c 24 89 cb 89 74 24 04 c1 e9 02 89 d6 89 7c 24 08 89 c7 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 8b 1c 24 8b 74 24 04 8b 7c 24 [ 288.751724] EIP: [<c127b1aa>] memcpy+0x1a/0x40 SS:ESP 0068:f100bf20 [ 288.751724] CR2: 0000000000000000 [ 288.972094] ---[ end trace dca3e5f32515fe5d ]--- [ 288.976724] Kernel panic - not syncing: Fatal exception in interrupt [ 288.983094] panic occurred, switching back to text console > > commit fa2da8cdae1dd64f78fc915ca1d1a4a93c71e7cb > Author: stephen hemminger <shemminger@...tta.com> > Date: Tue Nov 15 08:09:14 2011 +0000 > > bridge: correct IPv6 checksum after pull > > Bridge multicast snooping of ICMPv6 would incorrectly report a checksum prob > when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. > When bytes are removed from skb, the computed checksum needs to be adjusted. > > Signed-off-by: Stephen Hemminger <shemminger@...tta.com> > Tested-by: Martin Volf <martin.volf.42@...il.com> > Signed-off-by: David S. Miller <davem@...emloft.net> > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists