linux-kernel - Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAJw_Zv4Hk_kfc33xsVcdi-0_C6tsf_FD3sUx1JPDX_fZZMzeQ@mail.gmail.com>
Date:	Tue, 7 Feb 2012 12:37:08 +0800
From:	Jeff Chua <jeff.chua.linux@...il.com>
To:	Chris Ball <cjb@...top.org>
Cc:	adrian.hunter@...el.com, Pierre Ossman <pierre@...man.eu>,
	lkml <linux-kernel@...r.kernel.org>, linux-mmc@...r.kernel.org
Subject: Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

On Tue, Feb 7, 2012 at 11:38 AM, Chris Ball <cjb@...top.org> wrote:
> Hi, adding linux-mmc@ to the thread,
>
> On Mon, Feb 06 2012, Jeff Chua wrote:
>> The SD slot on the Lenovo X220 is doesn't seems to work on
>> Linux-3.3.0-rc2. I haven't use SD for a while, so don't know which
>> linux version will work on the X220.
>>
>>
>> # cat .config
>> CONFIG_MMC=m
>> CONFIG_MMC_DEBUG=y
>> CONFIG_MMC_CLKGATE=y
>> CONFIG_MMC_BLOCK=m
>> CONFIG_MMC_BLOCK_MINORS=8
>> CONFIG_MMC_BLOCK_BOUNCE=y
>> CONFIG_MMC_SDHCI=m
>> CONFIG_MMC_SDHCI_PCI=m
>> CONFIG_MMC_RICOH_MMC=y
>>
>>
>> # lspcpi -v
>>
>> 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04) (prog-if 01)
>>         Subsystem: Lenovo Device 21da
>>         Flags: bus master, fast devsel, latency 0, IRQ 16
>>         Memory at f1500000 (32-bit, non-prefetchable) [size=256]
>>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>>         Capabilities: [78] Power Management version 3
>>         Capabilities: [80] Express Endpoint, MSI 00
>>         Kernel driver in use: sdhci-pci
>>         Kernel modules: sdhci-pci
>>
>>
>> # dmesg
>> sdhci: Secure Digital Host Controller Interface driver
>> sdhci: Copyright(c) Pierre Ossman
>> sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
>> sdhci-pci 0000:0d:00.0: found 1 slot(s)
>> sdhci [sdhci_add_host()]: mmc0: Auto-CMD23 unavailable
>> sdhci: =========== REGISTER DUMP (mmc0)===========
>> sdhci: Sys addr: 0x00000000 | Version:  0x00000502
>> sdhci: Blk size: 0x00000000 | Blk cnt:  0x00000000
>> sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
>> sdhci: Present:  0x01f70000 | Host ctl: 0x00000000
>> sdhci: Power:    0x00000000 | Blk gap:  0x00000000
>> sdhci: Wake-up:  0x00000000 | Clock:    0x00000000
>> sdhci: Timeout:  0x00000000 | Int stat: 0x00000000
>> sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
>> sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
>> sdhci: Caps:     0x21e832b2 | Caps_1:   0x00008073
>> sdhci: Cmd:      0x00000000 | Max curr: 0x00000040
>> sdhci: Host ctl2: 0x00000000
>> sdhci: ===========================================
>>
>> mmc0: req done (CMD18): 0: 00000900 00000000 00000000 00000000
>> mmc0:     0 bytes transferred: -84
>> mmc0:     (CMD12): -110: 00000000 00000000 00000000 00000000
>> mmc0: starting CMD13 arg b3680000 flags 00000195
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000
>> mmc0: req done (CMD13): -110: 00000000 00000000 00000000 00000000
>> mmcblk0: error -110 sending status command, retrying
>> mmc0: starting CMD13 arg b3680000 flags 00000195
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000
>> mmc0: req done (CMD13): -110: 00000000 00000000 00000000 00000000
>> mmcblk0: error -110 sending status command, retrying
>> mmc0: starting CMD13 arg b3680000 flags 00000195
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
>> mmc0: req done (CMD13): 0: 00800b00 00000000 00000000 00000000
>> mmc0: starting CMD12 arg 00000000 flags 0000049d
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003
>> mmc0: req done (CMD12): 0: 00000b00 00000000 00000000 00000000
>> mmcblk0: error -110 sending stop command, original cmd response 0x900,
>> card status 0x800b00
>> mmcblk0: error -84 transferring data, sector 0, nr 32, cmd response
>> 0x900, card status 0xb00
>> mmcblk0: retrying using single block read
>> mmc0: starting CMD17 arg 00000000 flags 000000b5
>> mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
>> mmc0: req done (CMD17): 0: 00000900 00000000 00000000 00000000
>> mmc0:     512 bytes transferred: 0
>> mmc0: starting CMD17 arg 00000001 flags 000000b5
>> mmc0:     blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001
>> sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002
>>
>>
>> Any help will be very much appreciated.
>
> Could you try another SD card to confirm that it's the controller?
> If it is, a bisect (at least between kernel versions) is probably
> a good idea.

I've tried another SD but still facing the same problem on the SD
slot. The same SD works when plugged in a USB card reader on the X220.

I'll try to bisect later, but don't know which version would work for
X220. The X201s has a SD slot, but it's actually a USB card reader and
that works, so I will have to find a working version before I can
bisect.

Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/