| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1328734286-30091-2-git-send-email-paul.liu@linaro.org>
Date: Thu, 9 Feb 2012 04:51:26 +0800
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
To: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linaro-dev@...ts.linaro.org
Cc: patches@...aro.org, eric.miao@...aro.org, shawn.guo@...aro.org,
"Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>,
Nancy Chen <Nancy.Chen@...escale.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>
Subject: [PATCH v4 2/2] Regulator: Add Anatop regulator driver
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
Anatop is an integrated regulator inside i.MX6 SoC.
There are 3 digital regulators which controls PU, CORE (ARM), and SOC.
And 3 analog regulators which controls 1P1, 2P5, 3P0 (USB).
This patch adds the Anatop regulator driver.
Signed-off-by: Nancy Chen <Nancy.Chen@...escale.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@...com>
---
drivers/regulator/Kconfig | 6 +
drivers/regulator/Makefile | 1 +
drivers/regulator/anatop-regulator.c | 204 ++++++++++++++++++++++++++++
include/linux/regulator/anatop-regulator.h | 49 +++++++
4 files changed, 260 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/anatop-regulator.c
create mode 100644 include/linux/regulator/anatop-regulator.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7a61b17..5fbcda2 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -335,5 +335,11 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
+config REGULATOR_ANATOP
+ tristate "ANATOP LDO regulators"
+ depends on MFD_ANATOP
+ help
+ Say y here to support ANATOP LDOs regulators.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 503bac8..8440871 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -48,5 +48,6 @@ obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
+obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
new file mode 100644
index 0000000..d800c88
--- /dev/null
+++ b/drivers/regulator/anatop-regulator.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/anatop-regulator.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regulator/of_regulator.h>
+
+static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
+ int max_uV, unsigned *selector)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ u32 val, sel;
+ int uv;
+
+ uv = min_uV;
+ pr_debug("%s: uv %d, min %d, max %d\n", __func__,
+ uv, anatop_reg->rdata->min_voltage,
+ anatop_reg->rdata->max_voltage);
+
+ if (uv < anatop_reg->rdata->min_voltage
+ || uv > anatop_reg->rdata->max_voltage) {
+ if (max_uV > anatop_reg->rdata->min_voltage)
+ uv = anatop_reg->rdata->min_voltage;
+ else
+ return -EINVAL;
+ }
+
+ if (anatop_reg->rdata->control_reg) {
+ sel = (uv - anatop_reg->rdata->min_voltage) / 25000;
+ val = anatop_reg->rdata->min_bit_val + sel;
+ *selector = sel;
+ pr_debug("%s: calculated val %d\n", __func__, val);
+ anatop_reg->rdata->mfd->write(anatop_reg->rdata->mfd,
+ anatop_reg->rdata->control_reg,
+ anatop_reg->rdata->vol_bit_shift,
+ anatop_reg->rdata->vol_bit_size,
+ val);
+ return 0;
+ } else {
+ return -ENOTSUPP;
+ }
+}
+
+static int anatop_get_voltage_sel(struct regulator_dev *reg)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+ int selector;
+ struct anatop_regulator_data *rdata = anatop_reg->rdata;
+
+ if (rdata->control_reg) {
+ u32 val = rdata->mfd->read(rdata->mfd,
+ rdata->control_reg,
+ rdata->vol_bit_shift,
+ rdata->vol_bit_size);
+ selector = val - rdata->min_bit_val;
+ return selector;
+ } else {
+ return -ENOTSUPP;
+ }
+}
+
+static int anatop_list_voltage(struct regulator_dev *dev, unsigned selector)
+{
+ struct anatop_regulator *anatop_reg = rdev_get_drvdata(dev);
+ int uv;
+ struct anatop_regulator_data *rdata = anatop_reg->rdata;
+
+ uv = rdata->min_voltage + selector * 25000;
+ pr_debug("vddio = %d, selector = %u\n", uv, selector);
+ return uv;
+}
+
+static struct regulator_ops anatop_rops = {
+ .set_voltage = anatop_set_voltage,
+ .get_voltage_sel = anatop_get_voltage_sel,
+ .list_voltage = anatop_list_voltage,
+};
+
+int anatop_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct anatop_regulator *sreg;
+ struct regulator_init_data *initdata;
+ struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent);
+ const __be32 *rval;
+ u64 ofsize;
+
+ initdata = of_get_regulator_init_data(dev, dev->of_node);
+ sreg = devm_kzalloc(dev, sizeof(struct anatop_regulator), GFP_KERNEL);
+ if (!sreg)
+ return -EINVAL;
+ rdesc = devm_kzalloc(dev, sizeof(struct regulator_desc), GFP_KERNEL);
+ if (!rdesc)
+ return -EINVAL;
+ sreg->initdata = initdata;
+ sreg->regulator = rdesc;
+ memset(rdesc, 0, sizeof(struct regulator_desc));
+ rdesc->name = kstrdup(of_get_property(np, "regulator-name", NULL),
+ GFP_KERNEL);
+ rdesc->ops = &anatop_rops;
+ rdesc->type = REGULATOR_VOLTAGE;
+ rdesc->owner = THIS_MODULE;
+ sreg->rdata = devm_kzalloc(dev,
+ sizeof(struct anatop_regulator_data),
+ GFP_KERNEL);
+ sreg->rdata->name = kstrdup(rdesc->name, GFP_KERNEL);
+ rval = of_get_address(np, 0, &ofsize, NULL);
+ if (rval) {
+ sreg->rdata->control_reg = be32_to_cpu(rval[0]);
+ sreg->rdata->vol_bit_shift = be32_to_cpu(rval[1]);
+ }
+ sreg->rdata->mfd = anatopmfd;
+ sreg->rdata->vol_bit_size = (int)ofsize;
+ rval = of_get_property(np, "min-bit-val", NULL);
+ if (rval)
+ sreg->rdata->min_bit_val = be32_to_cpu(*rval);
+ rval = of_get_property(np, "min-voltage", NULL);
+ if (rval)
+ sreg->rdata->min_voltage = be32_to_cpu(*rval);
+ rval = of_get_property(np, "max-voltage", NULL);
+ if (rval)
+ sreg->rdata->max_voltage = be32_to_cpu(*rval);
+
+ /* register regulator */
+ rdev = regulator_register(rdesc, &pdev->dev,
+ initdata, sreg, pdev->dev.of_node);
+ platform_set_drvdata(pdev, rdev);
+
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ rdesc->name);
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+int anatop_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ regulator_unregister(rdev);
+ return 0;
+}
+
+struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = {
+ { .compatible = "fsl,anatop-regulator", },
+ { /* end */ }
+};
+
+
+struct platform_driver anatop_regulator = {
+ .driver = {
+ .name = "anatop_regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_anatop_regulator_match_tbl,
+ },
+ .probe = anatop_regulator_probe,
+ .remove = anatop_regulator_remove,
+};
+
+int anatop_regulator_init(void)
+{
+ return platform_driver_register(&anatop_regulator);
+}
+
+void anatop_regulator_exit(void)
+{
+ platform_driver_unregister(&anatop_regulator);
+}
+
+postcore_initcall(anatop_regulator_init);
+module_exit(anatop_regulator_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("ANATOP Regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/anatop-regulator.h b/include/linux/regulator/anatop-regulator.h
new file mode 100644
index 0000000..089d519
--- /dev/null
+++ b/include/linux/regulator/anatop-regulator.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __ANATOP_REGULATOR_H
+#define __ANATOP_REGULATOR_H
+#include <linux/regulator/driver.h>
+#include <linux/mfd/anatop.h>
+
+struct anatop_regulator {
+ struct regulator_desc *regulator;
+ struct regulator_init_data *initdata;
+ struct anatop_regulator_data *rdata;
+};
+
+
+struct anatop_regulator_data {
+ const char *name;
+
+ u32 control_reg;
+ struct anatop *mfd;
+ int vol_bit_shift;
+ int vol_bit_size;
+ int min_bit_val;
+ int min_voltage;
+ int max_voltage;
+};
+
+int anatop_register_regulator(
+ struct anatop_regulator *reg_data, int reg,
+ struct regulator_init_data *initdata);
+
+#endif /* __ANATOP_REGULATOR_H */
--
1.7.8.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists