[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-id: <1328858374-22339-1-git-send-email-myungjoo.ham@samsung.com>
Date: Fri, 10 Feb 2012 16:19:34 +0900
From: MyungJoo Ham <myungjoo.ham@...sung.com>
To: linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org
Cc: Kyungmin Park <kyungmin.park@...sung.com>,
"Rafael J. Wysocki" <rjw@...k.pl>, Kevin Hilman <khilman@...com>,
Mike Turquette <mturquette@...com>, myungjoo.ham@...il.com
Subject: [PATCH] PM / devfreq: add PM QoS support
Even if the performance of a device is controlled properly with devfreq,
sometimes, we still need to get PM-QoS inputs in order to meet the
required performance.
In our testbed of Exynos4412, which has on-chip various DMA devices, the
memory interface and system bus are controlled according to their
utilization by devfreq. However, in some multimedia applications
including video-playing with MFC (multi-function codec) H/W and
photo/video-capturing with FIMC H/W, we have observed issues due to
insufficient DMA throughput or latency.
In such applications, there are deadlines: less than 16.6ms with 60Hz.
With shorter polling intervals (5 ~ 15ms), the frequencies fluctuate
within a frame and we get missing frames and distorted pictures.
With longer polling intervals (20 ~ 100ms), the response time is not
sufficient and we get distorted or broken images. In other words,
regardless of polling interval, we get poor results with hard-deadline
H/Ws. They, in fact, have a preset requirement on DMA throughput.
Thus, we need PM-QoS capabilities in devfreq. (Note that for general
user applications, devfreq for bus/memory works fine. They are not so
sensitive to tens of ms in performance increasing responses in general.
In order to express how to handle QoS requests in devfreq devices,
the devfreq device drivers only need to express the mappings of
QoS value and frequency pairs with QoS class along with
devfreq_add_device() call.
As a side effect of the implementation, which happens to be positive,
min/max freq is now enforced regardless of governor implementation.
Tested on Exynos4412 machines with memory/bus frequencies and multimedia
H/W blocks. (camera, video decoding, and video encoding) Also tested on
display-related block's frequencies. (but, this driver is not yet
upstreamed.:) )
Signed-off-by: MyungJoo Ham <myungjoo.ham@...sung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
---
drivers/devfreq/devfreq.c | 162 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/devfreq.h | 37 ++++++++++
2 files changed, 196 insertions(+), 3 deletions(-)
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index a129a7b..a33fc6c 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -25,6 +25,7 @@
#include <linux/list.h>
#include <linux/printk.h>
#include <linux/hrtimer.h>
+#include <linux/pm_qos.h>
#include "governor.h"
struct class *devfreq_class;
@@ -94,6 +95,26 @@ int update_devfreq(struct devfreq *devfreq)
if (err)
return err;
+ /*
+ * Adjust the freuqency with user freq and QoS.
+ *
+ * List from the highest proiority
+ * min_freq
+ * max_freq
+ * qos_min_freq
+ */
+
+ if (devfreq->qos_min_freq && freq < devfreq->qos_min_freq)
+ freq = devfreq->qos_min_freq;
+ if (devfreq->max_freq && freq > devfreq->max_freq)
+ freq = devfreq->max_freq;
+ if (devfreq->min_freq && freq < devfreq->min_freq)
+ freq = devfreq->min_freq;
+
+ /*
+ * TODO in the devfreq-next:
+ * add relation or use rance (freq_min, freq_max)
+ */
err = devfreq->profile->target(devfreq->dev.parent, &freq);
if (err)
return err;
@@ -106,12 +127,12 @@ int update_devfreq(struct devfreq *devfreq)
* devfreq_notifier_call() - Notify that the device frequency requirements
* has been changed out of devfreq framework.
* @nb the notifier_block (supposed to be devfreq->nb)
- * @type not used
+ * @val not used.
* @devp not used
*
* Called by a notifier that uses devfreq->nb.
*/
-static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type,
+static int devfreq_notifier_call(struct notifier_block *nb, unsigned long val,
void *devp)
{
struct devfreq *devfreq = container_of(nb, struct devfreq, nb);
@@ -125,6 +146,49 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type,
}
/**
+ * devfreq_qos_notifier_call() -
+ */
+static int devfreq_qos_notifier_call(struct notifier_block *nb,
+ unsigned long value, void *devp)
+{
+ struct devfreq *devfreq = container_of(nb, struct devfreq, qos_nb);
+ int ret;
+ int i;
+ s32 default_value = PM_QOS_DEFAULT_VALUE;
+ struct devfreq_pm_qos_table *qos_list = devfreq->profile->qos_list;
+ bool qos_use_max = devfreq->profile->qos_use_max;
+
+ if (!qos_list)
+ return NOTIFY_DONE;
+
+ mutex_lock(&devfreq->lock);
+
+ if (value == default_value) {
+ devfreq->qos_min_freq = 0;
+ goto update;
+ }
+
+ for (i = 0; qos_list[i].freq; i++) {
+ /* QoS Met */
+ if ((qos_use_max && qos_list[i].qos_value >= value) ||
+ (!qos_use_max && qos_list[i].qos_value <= value)) {
+ devfreq->qos_min_freq = qos_list[i].freq;
+ goto update;
+ }
+ }
+
+ /* Use the highest QoS freq */
+ if (i > 0)
+ devfreq->qos_min_freq = qos_list[i - 1].freq;
+
+update:
+ ret = update_devfreq(devfreq);
+ mutex_unlock(&devfreq->lock);
+
+ return ret;
+}
+
+/**
* _remove_devfreq() - Remove devfreq from the device.
* @devfreq: the devfreq struct
* @skip: skip calling device_unregister().
@@ -371,12 +435,78 @@ struct devfreq *devfreq_add_device(struct device *dev,
devfreq->next_polling = devfreq->polling_jiffies
= msecs_to_jiffies(devfreq->profile->polling_ms);
devfreq->nb.notifier_call = devfreq_notifier_call;
+ devfreq->qos_nb.notifier_call = devfreq_qos_notifier_call;
+
+ /* Check the sanity of qos_list/qos_type */
+ if (profile->qos_type || profile->qos_list) {
+ int i;
+ bool positive_corelation = false;
+
+ if (profile->qos_type == PM_QOS_CPU_DMA_LATENCY ||
+ profile->qos_type == PM_QOS_NETWORK_LATENCY) {
+ if (profile->qos_use_max) {
+ dev_err(dev, "qos_use_max value inconsistent\n");
+ err = -EINVAL;
+ }
+ } else {
+ if (!profile->qos_use_max) {
+ dev_err(dev, "qos_use_max value inconsistent\n");
+ err = -EINVAL;
+ }
+ }
+ if (err)
+ goto err_dev;
+
+ if (!profile->qos_type || !profile->qos_list) {
+ dev_err(dev, "QoS requirement partially omitted.\n");
+ err = -EINVAL;
+ goto err_dev;
+ }
+
+ if (!profile->qos_list[0].freq) {
+ dev_err(dev, "The first QoS requirement is the end of list.\n");
+ err = -EINVAL;
+ goto err_dev;
+ }
+
+ for (i = 1; profile->qos_list[i].freq; i++) {
+ if (profile->qos_list[i].freq <=
+ profile->qos_list[i - 1].freq) {
+ dev_err(dev, "qos_list[].freq not sorted in the ascending order. ([%d]=%lu, [%d]=%lu)\n",
+ i - 1, profile->qos_list[i - 1].freq,
+ i, profile->qos_list[i].freq);
+ err = -EINVAL;
+ goto err_dev;
+ }
+
+ if (i == 1) {
+ if (profile->qos_list[0].qos_value <
+ profile->qos_list[1].qos_value)
+ positive_corelation = true;
+ continue;
+ }
+
+ if (((profile->qos_list[i - 1].qos_value <=
+ profile->qos_list[i].qos_value) &&
+ !positive_corelation)
+ ||
+ ((profile->qos_list[i - 1].qos_value >=
+ profile->qos_list[i].qos_value) &&
+ positive_corelation)) {
+ dev_err(dev, "qos_list[].qos_value not sorted.\n");
+ err = -EINVAL;
+ goto err_dev;
+ }
+ }
+
+ pm_qos_add_notifier(profile->qos_type, &devfreq->qos_nb);
+ }
dev_set_name(&devfreq->dev, dev_name(dev));
err = device_register(&devfreq->dev);
if (err) {
put_device(&devfreq->dev);
- goto err_dev;
+ goto err_qos_add;
}
if (governor->init)
@@ -404,6 +534,9 @@ out:
err_init:
device_unregister(&devfreq->dev);
+err_qos_add:
+ if (profile->qos_type || profile->qos_list)
+ pm_qos_remove_notifier(profile->qos_type, &devfreq->qos_nb);
err_dev:
mutex_unlock(&devfreq->lock);
kfree(devfreq);
@@ -434,6 +567,11 @@ int devfreq_remove_device(struct devfreq *devfreq)
}
mutex_lock(&devfreq->lock);
+
+ if (devfreq->profile->qos_type)
+ pm_qos_remove_notifier(devfreq->profile->qos_type,
+ &devfreq->qos_nb);
+
_remove_devfreq(devfreq, false); /* it unlocks devfreq->lock */
if (central_polling)
@@ -501,6 +639,13 @@ static ssize_t show_central_polling(struct device *dev,
!to_devfreq(dev)->governor->no_central_polling);
}
+static ssize_t show_qos_min_freq(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%lu\n", to_devfreq(dev)->qos_min_freq);
+}
+
static ssize_t store_min_freq(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -577,6 +722,7 @@ static struct device_attribute devfreq_attrs[] = {
store_polling_interval),
__ATTR(min_freq, S_IRUGO | S_IWUSR, show_min_freq, store_min_freq),
__ATTR(max_freq, S_IRUGO | S_IWUSR, show_max_freq, store_max_freq),
+ __ATTR(qos_min_freq, S_IRUGO, show_qos_min_freq, NULL),
{ },
};
@@ -671,6 +817,16 @@ int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq)
return srcu_notifier_chain_unregister(nh, &devfreq->nb);
}
+/**
+ * In progress (prototyping)
+ */
+int devfreq_simple_ondemand_flexrate_do(struct devfreq *devfreq,
+ unsigned long interval,
+ unsigned long number)
+{
+ return 0;
+}
+
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@...sung.com>");
MODULE_DESCRIPTION("devfreq class support");
MODULE_LICENSE("GPL");
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 5862475..b853379 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -45,10 +45,32 @@ struct devfreq_dev_status {
};
/**
+ * struct devfreq_pm_qos_table - An PM QoS requiement entry for devfreq dev.
+ * @freq Lowest frequency to meet the QoS requirement
+ * represented by qos_value. If freq=0, it means that
+ * this element is the last in the array.
+ * @qos_value The qos value defined in pm_qos_params.h
+ *
+ * Note that the array of devfreq_pm_qos_table should be sorted by freq
+ * in the ascending order except for the last element, which should be 0.
+ */
+struct devfreq_pm_qos_table {
+ unsigned long freq; /* 0 if this is the last element */
+ s32 qos_value;
+};
+
+/**
* struct devfreq_dev_profile - Devfreq's user device profile
* @initial_freq The operating frequency when devfreq_add_device() is
* called.
* @polling_ms The polling interval in ms. 0 disables polling.
+ * @qos_type QoS Type (defined in pm_qos_params.h)
+ * 0 (PM_QOS_RESERVED) if not used.
+ * @qos_use_max true: throughput (larger is faster)
+ * false: latency (smaller is faster)
+ * @qos_list Array of QoS requirements ending with .freq = 0
+ * NULL if not used. It should be either NULL or
+ * have a length > 1 with a first element effective.
* @target The device should set its operating frequency at
* freq or lowest-upper-than-freq value. If freq is
* higher than any operable frequency, set maximum.
@@ -61,11 +83,18 @@ struct devfreq_dev_status {
* from devfreq_remove_device() call. If the user
* has registered devfreq->nb at a notifier-head,
* this is the time to unregister it.
+ *
+ * Note that the array of qos_list should be sorted by freq
+ * in the ascending order.
*/
struct devfreq_dev_profile {
unsigned long initial_freq;
unsigned int polling_ms;
+ int qos_type;
+ bool qos_use_max;
+ struct devfreq_pm_qos_table *qos_list;
+
int (*target)(struct device *dev, unsigned long *freq);
int (*get_dev_status)(struct device *dev,
struct devfreq_dev_status *stat);
@@ -126,6 +155,8 @@ struct devfreq_governor {
* order to prevent trying to remove the object multiple times.
* @min_freq Limit minimum frequency requested by user (0: none)
* @max_freq Limit maximum frequency requested by user (0: none)
+ * @qos_nb notifier block used to notify pm qos requests
+ * @qos_min_freq Limit minimum frequency requested by QoS
*
* This structure stores the devfreq information for a give device.
*
@@ -154,6 +185,8 @@ struct devfreq {
unsigned long min_freq;
unsigned long max_freq;
+ struct notifier_block qos_nb;
+ unsigned long qos_min_freq;
};
#if defined(CONFIG_PM_DEVFREQ)
@@ -199,6 +232,10 @@ struct devfreq_simple_ondemand_data {
unsigned int upthreshold;
unsigned int downdifferential;
};
+
+int devfreq_simple_ondemand_flexrate_do(struct devfreq *devfreq,
+ unsigned long interval,
+ unsigned long number);
#endif
#else /* !CONFIG_PM_DEVFREQ */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists