linux-kernel - [PATCH v2 3/5] ptrace: make PTRACE_SEIZE set ptrace options specified in 'data' parameter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 10 Feb 2012 17:36:49 +0100
From:	Denys Vlasenko <vda.linux@...glemail.com>
To:	Andrew Morton <akpm@...ux-foundation.org>,
	Oleg Nesterov <oleg@...hat.com>, Tejun Heo <tj@...nel.org>,
	Pedro Alves <palves@...hat.com>,
	Jan Kratochvil <jan.kratochvil@...hat.com>,
	linux-kernel@...r.kernel.org
Cc:	Denys Vlasenko <vda.linux@...glemail.com>
Subject: [PATCH v2 3/5] ptrace: make PTRACE_SEIZE set ptrace options specified in 'data' parameter

This can be used to close a few corner cases in strace where we get
unwanted racy behavior after attach, but before we have a chance
to set options (the notorious post-execve SIGTRAP comes to mind),
and removes the need to track "did we set opts for this task" state
in strace internals.

While we are at it:

Make it possible to extend SEIZE in the future with more functionality
by passing non-zero 'addr' parameter.
To that end, error out if 'addr' is non-zero.
PTRACE_ATTACH did not (and still does not) have such check,
and users (strace) do pass garbage there... let's avoid repeating
this mistake with SEIZE.

Set all task->ptrace bits in one operation - before this change,
we were adding PT_SEIZED and PT_PTRACE_CAP with task->ptrace |= BIT ops.
This was probably ok (not a bug), but let's be on a safer side.

Changes in v2: update ptrace_attach() call in compat_sys_ptrace() too.

Signed-off-by: Denys Vlasenko <vda.linux@...glemail.com>
Acked-by: Tejun Heo <tj@...nel.org>
---
 kernel/ptrace.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 9acd07a..4661c5b 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -231,6 +231,7 @@ bool ptrace_may_access(struct task_struct *task, unsigned int mode)
 }
 
 static int ptrace_attach(struct task_struct *task, long request,
+			 unsigned long addr,
 			 unsigned long flags)
 {
 	bool seize = (request == PTRACE_SEIZE);
@@ -238,19 +239,29 @@ static int ptrace_attach(struct task_struct *task, long request,
 
 	/*
 	 * SEIZE will enable new ptrace behaviors which will be implemented
-	 * gradually.  SEIZE_DEVEL is used to prevent applications
+	 * gradually.  SEIZE_DEVEL bit is used to prevent applications
 	 * expecting full SEIZE behaviors trapping on kernel commits which
 	 * are still in the process of implementing them.
 	 *
 	 * Only test programs for new ptrace behaviors being implemented
 	 * should set SEIZE_DEVEL.  If unset, SEIZE will fail with -EIO.
 	 *
-	 * Once SEIZE behaviors are completely implemented, this flag and
-	 * the following test will be removed.
+	 * Once SEIZE behaviors are completely implemented, this flag
+	 * will be removed.
 	 */
 	retval = -EIO;
-	if (seize && !(flags & PTRACE_SEIZE_DEVEL))
-		goto out;
+	if (seize) {
+		if (addr != 0)
+			goto out;
+		if (!(flags & PTRACE_SEIZE_DEVEL))
+			goto out;
+		flags &= ~(unsigned long)PTRACE_SEIZE_DEVEL;
+		if (flags & ~(unsigned long)PTRACE_O_MASK)
+			goto out;
+		flags = PT_PTRACED | PT_SEIZED | (flags << PT_OPT_FLAG_SHIFT);
+	} else {
+		flags = PT_PTRACED;
+	}
 
 	audit_ptrace(task);
 
@@ -282,11 +293,11 @@ static int ptrace_attach(struct task_struct *task, long request,
 	if (task->ptrace)
 		goto unlock_tasklist;
 
-	task->ptrace = PT_PTRACED;
 	if (seize)
-		task->ptrace |= PT_SEIZED;
+		flags |= PT_SEIZED;
 	if (ns_capable(task_user_ns(task), CAP_SYS_PTRACE))
-		task->ptrace |= PT_PTRACE_CAP;
+		flags |= PT_PTRACE_CAP;
+	task->ptrace = flags;
 
 	__ptrace_link(task, current);
 
@@ -879,7 +890,7 @@ SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr,
 	}
 
 	if (request == PTRACE_ATTACH || request == PTRACE_SEIZE) {
-		ret = ptrace_attach(child, request, data);
+		ret = ptrace_attach(child, request, addr, data);
 		/*
 		 * Some architectures need to do book-keeping after
 		 * a ptrace attach.
@@ -1022,7 +1033,7 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 	}
 
 	if (request == PTRACE_ATTACH || request == PTRACE_SEIZE) {
-		ret = ptrace_attach(child, request, data);
+		ret = ptrace_attach(child, request, addr, data);
 		/*
 		 * Some architectures need to do book-keeping after
 		 * a ptrace attach.
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/