linux-kernel - Re: bsg_unregister_queue attempts to remove "bsg" sysfs link that doesn't exist

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4F347119.5070706@panasas.com>
Date:	Fri, 10 Feb 2012 03:21:29 +0200
From:	Boaz Harrosh <bharrosh@...asas.com>
To:	Andrew Morton <akpm@...ux-foundation.org>
CC:	Simon Arlott <simon@...e.lp0.eu>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	<linux-scsi@...r.kernel.org>, Jens Axboe <axboe@...nel.dk>,
	FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>
Subject: Re: bsg_unregister_queue attempts to remove "bsg" sysfs link that
 doesn't exist

On 02/10/2012 01:24 AM, Andrew Morton wrote:
> (cc's added)
> 
> Kernel version appears to be 3.3-rc2.  
> 
> On Wed, 08 Feb 2012 20:54:16 +0000
> Simon Arlott <simon@...e.lp0.eu> wrote:
> 
>> I unplugged two hard drives and this happened:
>> [168525.975223] mptbase: ioc0: LogInfo(0x31110d00): Originator={PL}, Code={Reset}, SubCode(0x0d00) cb_idx mptbase_reply
>> [168527.976303] mptbase: ioc0: LogInfo(0x31110d00): Originator={PL}, Code={Reset}, SubCode(0x0d00) cb_idx mptbase_reply
>> [168530.879028]  end_device-8:2: mptsas: ioc0: removing sata device: fw_channel 0, fw_id 13, phy 7,sas_addr 0xde5c3f3bbc9bae8f
>> [168530.879034]  phy-8:7: mptsas: ioc0: delete phy 7, phy-obj (0xffff88027582b800)
>> [168530.879045]  port-8:2: mptsas: ioc0: delete port 2, sas_addr (0xde5c3f3bbc9bae8f)
>> [168530.879525] sd 8:0:2:0: [sdh] Synchronizing SCSI cache
>> [168530.879581] sd 8:0:2:0: [sdh]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>> [168530.879651] scsi target8:0:2: mptsas: ioc0: delete device: fw_channel 0, fw_id 13, phy 7, sas_addr 0xde5c3f3bbc9bae8f
>> [168530.879706] ------------[ cut here ]------------
>> [168530.879715] WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0x9c/0xb0()
>> [168530.879717] Hardware name: empty
>> [168530.879719] sysfs: can not remove 'bsg', no directory
>> [168530.879721] Modules linked in: zaurus cdc_ether usbnet bnep rfcomm bridge stp fuse ext4 jbd2 nf_conntrack_ipv6 ipt_REJECT iptable_filter nf_defrag_ipv6 xt_state ip6t_REJECT iptable_mangle xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter xt_dscp xt_string xt_owner xt_NFQUEUE xt_multiport xt_mark xt_iprange xt_hashlimit xt_conntrack xt_connmark nf_conntrack ip6_tables ip_tables x_tables btusb bluetooth crc16
>> [168530.879757] Pid: 1578, comm: kworker/u:7 Tainted: G       A     3.3.0-rc2+ #00119-gd8e94fc-dirty
>> [168530.879761] Call Trace:
>> [168530.879770]  [<ffffffff8103a29a>] warn_slowpath_common+0x7a/0xb0
>> [168530.879774]  [<ffffffff8103a371>] warn_slowpath_fmt+0x41/0x50
>> [168530.879778]  [<ffffffff81154fbc>] sysfs_hash_and_remove+0x9c/0xb0
>> [168530.879782]  [<ffffffff81157a01>] sysfs_remove_link+0x21/0x30
>> [168530.879788]  [<ffffffff81274bb7>] bsg_unregister_queue+0x47/0xa0
>> [168530.879795]  [<ffffffff813fdc20>] sas_rphy_free+0xa0/0xd0
>> [168530.879798]  [<ffffffff813fe9e9>] sas_rphy_delete+0x19/0x20
>> [168530.879801]  [<ffffffff813fea15>] sas_port_delete+0x25/0x130
>> [168530.879806]  [<ffffffff814581c3>] mptsas_del_end_device+0x183/0x1c0
>> [168530.879810]  [<ffffffff8145aedc>] mptsas_hotplug_work+0x1ec/0x6a0
>> [168530.879816]  [<ffffffff810698e5>] ? idle_balance+0xf5/0x150
>> [168530.879820]  [<ffffffff81061779>] ? finish_task_switch+0x49/0xd0
>> [168530.879824]  [<ffffffff8145c183>] mptsas_firmware_event_work+0xa63/0xca0
>> [168530.879829]  [<ffffffff81046cf7>] ? lock_timer_base+0x37/0x70
>> [168530.879832]  [<ffffffff8145b720>] ? mptsas_send_ir2_event+0x110/0x110
>> [168530.879836]  [<ffffffff8104fd67>] process_one_work+0x117/0x3c0
>> [168530.879839]  [<ffffffff81050382>] worker_thread+0x172/0x3e0
>> [168530.879844]  [<ffffffff8105e651>] ? __wake_up_common+0x51/0x80
>> [168530.879847]  [<ffffffff81050210>] ? manage_workers+0x200/0x200
>> [168530.879852]  [<ffffffff81056796>] kthread+0x96/0xa0
>> [168530.879858]  [<ffffffff816d01d4>] kernel_thread_helper+0x4/0x10
>> [168530.879862]  [<ffffffff81056700>] ? kthread_freezable_should_stop+0x60/0x60
>> [168530.879866]  [<ffffffff816d01d0>] ? gs_change+0xb/0xb
>> [168530.879869] ---[ end trace b116d5a791652b31 ]---
>> [168532.879048]  end_device-8:1: mptsas: ioc0: removing sata device: fw_channel 0, fw_id 12, phy 6,sas_addr 0xde5c3f3cc395aa8e
>> [168532.879054]  phy-8:6: mptsas: ioc0: delete phy 6, phy-obj (0xffff88027582b000)
>> [168532.879065]  port-8:1: mptsas: ioc0: delete port 1, sas_addr (0xde5c3f3cc395aa8e)
>> [168532.879580] sd 8:0:1:0: [sdg] Synchronizing SCSI cache
>> [168532.879692] sd 8:0:1:0: [sdg]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
>> [168532.879877] scsi target8:0:1: mptsas: ioc0: delete device: fw_channel 0, fw_id 12, phy 6, sas_addr 0xde5c3f3cc395aa8e
>> [168532.879999] ------------[ cut here ]------------
>> [168532.880033] WARNING: at fs/sysfs/inode.c:323 sysfs_hash_and_remove+0x9c/0xb0()
>> [168532.880038] Hardware name: empty
>> [168532.880042] sysfs: can not remove 'bsg', no directory
>> [168532.880045] Modules linked in: zaurus cdc_ether usbnet bnep rfcomm bridge stp fuse ext4 jbd2 nf_conntrack_ipv6 ipt_REJECT iptable_filter nf_defrag_ipv6 xt_state ip6t_REJECT iptable_mangle xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter xt_dscp xt_string xt_owner xt_NFQUEUE xt_multiport xt_mark xt_iprange xt_hashlimit xt_conntrack xt_connmark nf_conntrack ip6_tables ip_tables x_tables btusb bluetooth crc16
>> [168532.880108] Pid: 1578, comm: kworker/u:7 Tainted: G       AW    3.3.0-rc2+ #00119-gd8e94fc-dirty
>> [168532.880115] Call Trace:
>> [168532.880128]  [<ffffffff8103a29a>] warn_slowpath_common+0x7a/0xb0
>> [168532.880136]  [<ffffffff8103a371>] warn_slowpath_fmt+0x41/0x50
>> [168532.880143]  [<ffffffff81154fbc>] sysfs_hash_and_remove+0x9c/0xb0
>> [168532.880152]  [<ffffffff81157a01>] sysfs_remove_link+0x21/0x30
>> [168532.880160]  [<ffffffff81274bb7>] bsg_unregister_queue+0x47/0xa0
>> [168532.880171]  [<ffffffff813fdc20>] sas_rphy_free+0xa0/0xd0
>> [168532.880177]  [<ffffffff813fe9e9>] sas_rphy_delete+0x19/0x20
>> [168532.880183]  [<ffffffff813fea15>] sas_port_delete+0x25/0x130
>> [168532.880192]  [<ffffffff814581c3>] mptsas_del_end_device+0x183/0x1c0
>> [168532.880218]  [<ffffffff8145aedc>] mptsas_hotplug_work+0x1ec/0x6a0
>> [168532.880227]  [<ffffffff810698e5>] ? idle_balance+0xf5/0x150
>> [168532.880234]  [<ffffffff81061779>] ? finish_task_switch+0x49/0xd0
>> [168532.880241]  [<ffffffff8145c183>] mptsas_firmware_event_work+0xa63/0xca0
>> [168532.880250]  [<ffffffff81046cf7>] ? lock_timer_base+0x37/0x70
>> [168532.880256]  [<ffffffff8145b720>] ? mptsas_send_ir2_event+0x110/0x110
>> [168532.880264]  [<ffffffff8104fd67>] process_one_work+0x117/0x3c0
>> [168532.880270]  [<ffffffff81050382>] worker_thread+0x172/0x3e0
>> [168532.880279]  [<ffffffff8105e651>] ? __wake_up_common+0x51/0x80
>> [168532.880285]  [<ffffffff81050210>] ? manage_workers+0x200/0x200
>> [168532.880293]  [<ffffffff81056796>] kthread+0x96/0xa0
>> [168532.880303]  [<ffffffff816d01d4>] kernel_thread_helper+0x4/0x10
>> [168532.880316]  [<ffffffff81056700>] ? kthread_freezable_should_stop+0x60/0x60
>> [168532.880329]  [<ffffffff816d01d0>] ? gs_change+0xb/0xb
>> [168532.880336] ---[ end trace b116d5a791652b32 ]---
> 

It might be the same as the other reports see a fix here:
https://lkml.org/lkml/2012/2/8/246

See thread: device removal causes "sysfs: can not remove 'bsg', no directory"

Cheers
Boaz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/