linux-kernel - Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAAJw_Zu7TitPqM3Oqo0ySci_VQ8xm9YMghiQ1HLY7nwCrcYnVg@mail.gmail.com>
Date:	Mon, 13 Feb 2012 13:20:21 +0800
From:	Jeff Chua <jeff.chua.linux@...il.com>
To:	Philip Rakity <prakity@...vell.com>
Cc:	Jaehoon Chung <jh80.chung@...sung.com>,
	Chris Ball <cjb@...top.org>, Pierre Ossman <pierre@...man.eu>,
	lkml <linux-kernel@...r.kernel.org>,
	"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
	"arindam.nath@....com" <arindam.nath@....com>,
	"zhangfei.gao@...il.com" <zhangfei.gao@...il.com>
Subject: Re: mmc sdhci mmcblk0: error -110 sending status command, retrying

On Mon, Feb 13, 2012 at 1:16 PM, Jeff Chua <jeff.chua.linux@...il.com> wrote:
> On Mon, Feb 13, 2012 at 12:41 PM, Jeff Chua <jeff.chua.linux@...il.com> wrote:
>> I ran tests for frequency that works dd out 1G of data from 8MHz to
>> 16MHz, and it seems frequency less than 8.4MHz can only transfer at
>> rate of 14.3MB/s and above 8.4MHz, speed goes up to 18.3 MB/s. Above
>> 17MHz, errors encounters.
>>
>> hz1  8000000  73.5029 s  14.3 MB/s
>> hz2  8000000  73.4740 s  14.3 MB/s
>> hz3  8000000  73.3982 s  14.3 MB/s
>> hz1  8200000  71.9677 s  14.6 MB/s
>> hz2  8200000  73.4936 s  14.3 MB/s
>> hz3  8200000  73.3462 s  14.3 MB/s
>> hz1  8400000  56.6296 s  18.5 MB/s
>> hz2  8400000  56.7616 s  18.5 MB/s
>> hz3  8400000  56.7926 s  18.5 MB/s
>> hz1  8600000  56.6622 s  18.5 MB/s
>> hz2  8600000  56.7201 s  18.5 MB/s
>> hz3  8600000  56.6476 s  18.5 MB/s
>> hz1  8800000  56.8846 s  18.4 MB/s
>> hz2  8800000  56.8226 s  18.5 MB/s
>> hz3  8800000  56.7070 s  18.5 MB/s
>
> I've turned on write, and there's no error writing. But speed is
> slower than accessing it via USB2 SD card reader. Same SD.
>

Via SD PCI
18.779 sec  4.04 %cpu

Via USB2.0 Card Reader
12.205 sec  2.04 %cpu

Via USB3.0 Card Reader
11.427 sec  2.01 %cpu


Shouldn't PCI SD be faster? Same SD used for all tests.

THanks,
Jeff


Thanks,
Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/