| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120215050146.14099.8951.stgit@localhost.localdomain>
Date: Wed, 15 Feb 2012 14:01:46 +0900
From: Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
To: Ingo Molnar <mingo@...e.hu>, linux-kernel@...r.kernel.org
Cc: yrl.pp-manager.tt@...achi.com,
Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
Ananth N Mavinakayanahalli <ananth@...ibm.com>
Subject: [PATCH] [BUGFIX] x86/kprobes: Fix to recover instructions on
optimized path
Current probed-instruction recovery expects that only breakpoint
instruction modifies instruction. However, since kprobes jump
optimization can replace original instructions with a jump,
that expectation is not enough. And it may cause instruction
decoding failure on the function where an optimized probe
already exists.
This bug can reproduce easily as below.
1) find a target function address (any kprobe-able function is OK)
$ grep __secure_computing /proc/kallsyms
ffffffff810c19d0 T __secure_computing
2) decode the function
$ objdump -d vmlinux --start-address=0xffffffff810c19d0 --stop-address=0xffffffff810c19eb
vmlinux: file format elf64-x86-64
Disassembly of section .text:
ffffffff810c19d0 <__secure_computing>:
ffffffff810c19d0: 55 push %rbp
ffffffff810c19d1: 48 89 e5 mov %rsp,%rbp
ffffffff810c19d4: e8 67 8f 72 00 callq ffffffff817ea940 <mcount>
ffffffff810c19d9: 65 48 8b 04 25 40 b8 mov %gs:0xb840,%rax
ffffffff810c19e0: 00 00
ffffffff810c19e2: 83 b8 88 05 00 00 01 cmpl $0x1,0x588(%rax)
ffffffff810c19e9: 74 05 je ffffffff810c19f0 <__secure_computing+0x20>
3) put a kprobe-event at an optimize-able place, where no
call/jump places within the 5 bytes.
$ su -
# cd /sys/kernel/debug/tracing
# echo p __secure_computing+0x9 > kprobe_events
4) enable it and check it is optimized.
# echo 1 > events/kprobes/p___secure_computing_9/enable
# cat ../kprobes/list
ffffffff810c19d9 k __secure_computing+0x9 [OPTIMIZED]
5) put another kprobe on an instruction after previous probe in
the same function.
# echo p __secure_computing+0x12 >> kprobe_events
bash: echo: write error: Invalid argument
# dmesg | tail -n 1
[ 1666.500016] Probing address(0xffffffff810c19e2) is not an instruction boundary.
6) however, if the kprobes optimization is disabled, it works.
# echo 0 > /proc/sys/debug/kprobes-optimization
# cat ../kprobes/list
ffffffff810c19d9 k __secure_computing+0x9
# echo p __secure_computing+0x12 >> kprobe_events
(no error)
This is because kprobes doesn't recover the instruction
which is overwritten with a relative jump by another kprobe
when finding instruction boundary.
It only recovers the breakpoint instruction.
This patch fixes kprobes to recover such instructions.
With this fix:
# echo p __secure_computing+0x9 > kprobe_events
# echo 1 > events/kprobes/p___secure_computing_9/enable
# cat ../kprobes/list
ffffffff810c1aa9 k __secure_computing+0x9 [OPTIMIZED]
# echo p __secure_computing+0x12 >> kprobe_events
# cat ../kprobes/list
ffffffff810c1aa9 k __secure_computing+0x9 [OPTIMIZED]
ffffffff810c1ab2 k __secure_computing+0x12 [DISABLED]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...hat.com>
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: Ananth N Mavinakayanahalli <ananth@...ibm.com>
---
arch/x86/kernel/kprobes.c | 112 +++++++++++++++++++++++++++------------------
include/linux/kprobes.h | 6 ++
kernel/kprobes.c | 2 -
3 files changed, 75 insertions(+), 45 deletions(-)
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 7da647d..2fb77db 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -207,13 +207,29 @@ retry:
}
}
-/* Recover the probed instruction at addr for further analysis. */
-static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
+/*
+ * Recover the probed instruction at addr for further analysis.
+ * Caller must lock kprobes by kprobe_mutex, or disable preemption
+ * for preventing to release referencing kprobes.
+ */
+static unsigned long recover_probed_instruction(kprobe_opcode_t *buf,
+ unsigned long addr)
{
struct kprobe *kp;
- kp = get_kprobe((void *)addr);
- if (!kp)
- return -EINVAL;
+ int i;
+
+ for (i = 0; i < RELATIVEJUMP_SIZE; i++) {
+ kp = get_kprobe((void *)addr - i);
+ if (kp)
+ goto found;
+ }
+
+ /* There is no probes, return original address */
+ return addr;
+
+found:
+ if (i != 0 && !kprobe_optready(kp))
+ return addr; /* this probe doesn't affect the instruction */
/*
* Basically, kp->ainsn.insn has an original instruction.
@@ -229,15 +245,33 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
* from it and kp->opcode.
*/
memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
- buf[0] = kp->opcode;
- return 0;
+ if (i == 0)
+ buf[0] = kp->opcode;
+
+ if (kprobe_optready(kp)) {
+ /*
+ * If the kprobe can be optimized, original bytes which
+ * can be overwritten by jump destination address. In this
+ * case, original bytes must be recovered from
+ * op->optinsn.copied_insn buffer.
+ */
+ struct optimized_kprobe *op;
+ op = container_of(kp, struct optimized_kprobe, kp);
+ if (i == 0)
+ memcpy(buf + 1, op->optinsn.copied_insn,
+ RELATIVE_ADDR_SIZE);
+ else
+ memcpy(buf, op->optinsn.copied_insn + i - 1,
+ RELATIVE_ADDR_SIZE - i + 1);
+ }
+
+ return (unsigned long)buf;
}
/* Check if paddr is at an instruction boundary */
static int __kprobes can_probe(unsigned long paddr)
{
- int ret;
- unsigned long addr, offset = 0;
+ unsigned long addr, __addr, offset = 0;
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
@@ -247,26 +281,24 @@ static int __kprobes can_probe(unsigned long paddr)
/* Decode instructions */
addr = paddr - offset;
while (addr < paddr) {
- kernel_insn_init(&insn, (void *)addr);
- insn_get_opcode(&insn);
-
/*
* Check if the instruction has been modified by another
* kprobe, in which case we replace the breakpoint by the
* original instruction in our buffer.
+ * Also, jump optimization will change the breakpoint to
+ * relative-jump. Since the relative-jump itself is
+ * normally used, we just go through if there is no kprobe.
*/
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
- ret = recover_probed_instruction(buf, addr);
- if (ret)
- /*
- * Another debugging subsystem might insert
- * this breakpoint. In that case, we can't
- * recover it.
- */
- return 0;
- kernel_insn_init(&insn, buf);
- }
+ __addr = recover_probed_instruction(buf, addr);
+ kernel_insn_init(&insn, (void *)__addr);
insn_get_length(&insn);
+ if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ /*
+ * Another debugging subsystem might insert
+ * this breakpoint. In that case, we can't
+ * recover it.
+ */
+ return 0;
addr += insn.length;
}
@@ -302,21 +334,16 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
{
struct insn insn;
- int ret;
kprobe_opcode_t buf[MAX_INSN_SIZE];
+ if (recover)
+ src = (u8 *)recover_probed_instruction(buf, (unsigned long)src);
+
kernel_insn_init(&insn, src);
- if (recover) {
- insn_get_opcode(&insn);
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
- ret = recover_probed_instruction(buf,
- (unsigned long)src);
- if (ret)
- return 0;
- kernel_insn_init(&insn, buf);
- }
- }
insn_get_length(&insn);
+ /* Another subsystem puts a breakpoint, failed to recover */
+ if (recover && insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ return 0;
memcpy(dest, insn.kaddr, insn.length);
#ifdef CONFIG_X86_64
@@ -1271,8 +1298,7 @@ static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
/* Decode whole function to ensure any instructions don't jump into target */
static int __kprobes can_optimize(unsigned long paddr)
{
- int ret;
- unsigned long addr, size = 0, offset = 0;
+ unsigned long addr, __addr, size = 0, offset = 0;
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
@@ -1301,15 +1327,12 @@ static int __kprobes can_optimize(unsigned long paddr)
* we can't optimize kprobe in this function.
*/
return 0;
- kernel_insn_init(&insn, (void *)addr);
- insn_get_opcode(&insn);
- if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
- ret = recover_probed_instruction(buf, addr);
- if (ret)
- return 0;
- kernel_insn_init(&insn, buf);
- }
+ __addr = recover_probed_instruction(buf, addr);
+ kernel_insn_init(&insn, (void *)__addr);
insn_get_length(&insn);
+ /* Another subsystem puts a breakpoint */
+ if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+ return 0;
/* Recover address */
insn.kaddr = (void *)addr;
insn.next_byte = (void *)(addr + insn.length);
@@ -1366,6 +1389,7 @@ void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
/*
* Copy replacing target instructions
* Target instructions MUST be relocatable (checked inside)
+ * This is called when new aggr(opt)probe is allocated or reused.
*/
int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
{
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index dce6e4d..6abec49 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -293,6 +293,12 @@ extern int proc_kprobes_optimization_handler(struct ctl_table *table,
size_t *length, loff_t *ppos);
#endif
+extern int kprobe_optready(struct kprobe *p);
+#else /* CONFIG_OPTPROBES */
+static inline int kprobe_optready(struct kprobe *p)
+{
+ return 0;
+}
#endif /* CONFIG_OPTPROBES */
/* Get the kprobe at this addr (if any) - called with preemption disabled */
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 9788c0e..c52c68b 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -403,7 +403,7 @@ static __kprobes void free_aggr_kprobe(struct kprobe *p)
}
/* Return true(!0) if the kprobe is ready for optimization. */
-static inline int kprobe_optready(struct kprobe *p)
+int kprobe_optready(struct kprobe *p)
{
struct optimized_kprobe *op;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists