| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1329383368-12122-25-git-send-email-grant.likely@secretlab.ca>
Date: Thu, 16 Feb 2012 02:09:25 -0700
From: Grant Likely <grant.likely@...retlab.ca>
To: linux-kernel@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
devicetree-discuss@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Thomas Gleixner <tglx@...utronix.de>,
Milton Miller <miltonm@....com>,
Rob Herring <rob.herring@...xeda.com>
Cc: Grant Likely <grant.likely@...retlab.ca>,
Michal Simek <monstr@...str.eu>,
John Williams <john.williams@...alogix.com>,
John Linn <john.linn@...inx.com>
Subject: [PATCH v5 24/27] irq_domain/microblaze: Convert microblaze to use irq_domains
This patch converts Microblaze to use the irq_domain remapper and get
away from hard coding the offset between hwirq number and the linux irq
number space. This also paves the way for multiple interrupt controllers.
v2: Don't enable SPARSE_IRQ and keep NR_IRQS set to 33
Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
Signed-off-by: Michal Simek <monstr@...str.eu>
Cc: Rob Herring <rob.herring@...xeda.com>
Cc: John Williams <john.williams@...alogix.com>
Cc: John Linn <john.linn@...inx.com>
---
arch/microblaze/Kconfig | 1 +
arch/microblaze/include/asm/hardirq.h | 16 ---------
arch/microblaze/include/asm/irq.h | 42 ++---------------------
arch/microblaze/kernel/intc.c | 61 ++++++++++++++++++++-------------
arch/microblaze/kernel/irq.c | 24 ++-----------
5 files changed, 45 insertions(+), 99 deletions(-)
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index c8d6efb..11060fa 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -14,6 +14,7 @@ config MICROBLAZE
select TRACING_SUPPORT
select OF
select OF_EARLY_FLATTREE
+ select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index cd1ac9a..fb3c05a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_HARDIRQ_H
-#define _ASM_MICROBLAZE_HARDIRQ_H
-
-/* should be defined in each interrupt controller driver */
-extern unsigned int get_irq(struct pt_regs *regs);
-
#include <asm-generic/hardirq.h>
-
-#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 7798ad1..bab3b13 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -9,49 +9,13 @@
#ifndef _ASM_MICROBLAZE_IRQ_H
#define _ASM_MICROBLAZE_IRQ_H
-
-/*
- * Linux IRQ# is currently offset by one to map to the hardware
- * irq number. So hardware IRQ0 maps to Linux irq 1.
- */
-#define NO_IRQ_OFFSET 1
-#define IRQ_OFFSET NO_IRQ_OFFSET
-#define NR_IRQS (32 + IRQ_OFFSET)
+#define NR_IRQS (32 + 1)
#include <asm-generic/irq.h>
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
-extern unsigned int nr_irq;
-
struct pt_regs;
extern void do_IRQ(struct pt_regs *regs);
-/** FIXME - not implement
- * irq_dispose_mapping - Unmap an interrupt
- * @virq: linux virq number of the interrupt to unmap
- */
-static inline void irq_dispose_mapping(unsigned int virq)
-{
- return;
-}
-
-struct irq_domain;
-
-/**
- * irq_create_mapping - Map a hardware interrupt into linux virq space
- * @host: host owning this hardware interrupt or NULL for default host
- * @hwirq: hardware irq number in that host space
- *
- * Only one mapping per hardware interrupt is permitted. Returns a linux
- * virq number.
- * If the sense/trigger is to be specified, set_irq_type() should be called
- * on the number returned from that call.
- */
-extern unsigned int irq_create_mapping(struct irq_domain *host,
- irq_hw_number_t hwirq);
+/* should be defined in each interrupt controller driver */
+extern unsigned int get_irq(void);
#endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 44b177e..ad12067 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
+#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <asm/page.h>
#include <linux/io.h>
@@ -25,8 +26,6 @@ static unsigned int intc_baseaddr;
#define INTC_BASE intc_baseaddr
#endif
-unsigned int nr_irq;
-
/* No one else should require these constants, so define them locally here. */
#define ISR 0x00 /* Interrupt Status Register */
#define IPR 0x04 /* Interrupt Pending Register */
@@ -84,24 +83,45 @@ static struct irq_chip intc_dev = {
.irq_mask_ack = intc_mask_ack,
};
-unsigned int get_irq(struct pt_regs *regs)
+static struct irq_domain *root_domain;
+
+unsigned int get_irq(void)
{
- int irq;
+ unsigned int hwirq, irq = -1;
- /*
- * NOTE: This function is the one that needs to be improved in
- * order to handle multiple interrupt controllers. It currently
- * is hardcoded to check for interrupts only on the first INTC.
- */
- irq = in_be32(INTC_BASE + IVR) + NO_IRQ_OFFSET;
- pr_debug("get_irq: %d\n", irq);
+ hwirq = in_be32(INTC_BASE + IVR);
+ if (hwirq != -1U)
+ irq = irq_find_mapping(root_domain, hwirq);
+
+ pr_debug("get_irq: hwirq=%d, irq=%d\n", hwirq, irq);
return irq;
}
+int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+ u32 intr_mask = (u32)d->host_data;
+
+ if (intr_mask & (1 << hw)) {
+ irq_set_chip_and_handler_name(irq, &intc_dev,
+ handle_edge_irq, "edge");
+ irq_clear_status_flags(irq, IRQ_LEVEL);
+ } else {
+ irq_set_chip_and_handler_name(irq, &intc_dev,
+ handle_level_irq, "level");
+ irq_set_status_flags(irq, IRQ_LEVEL);
+ }
+ return 0;
+}
+
+static const struct irq_domain_ops xintc_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+ .map = xintc_map,
+};
+
void __init init_IRQ(void)
{
- u32 i, intr_mask;
+ u32 nr_irq, intr_mask;
struct device_node *intc = NULL;
#ifdef CONFIG_SELFMOD_INTC
unsigned int intc_baseaddr = 0;
@@ -146,16 +166,9 @@ void __init init_IRQ(void)
/* Turn on the Master Enable. */
out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
- for (i = IRQ_OFFSET; i < (nr_irq + IRQ_OFFSET); ++i) {
- if (intr_mask & (0x00000001 << (i - IRQ_OFFSET))) {
- irq_set_chip_and_handler_name(i, &intc_dev,
- handle_edge_irq, "edge");
- irq_clear_status_flags(i, IRQ_LEVEL);
- } else {
- irq_set_chip_and_handler_name(i, &intc_dev,
- handle_level_irq, "level");
- irq_set_status_flags(i, IRQ_LEVEL);
- }
- irq_get_irq_data(i)->hwirq = i - IRQ_OFFSET;
- }
+ /* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
+ * lazy and Michal can clean it up to something nicer when he tests
+ * and commits this patch. ~~gcl */
+ root_domain = irq_domain_add_linear(intc, nr_irq, &xintc_irq_domain_ops,
+ (void *)intr_mask);
}
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 3f613df..ace700a 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -31,14 +31,13 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
trace_hardirqs_off();
irq_enter();
- irq = get_irq(regs);
+ irq = get_irq();
next_irq:
BUG_ON(!irq);
- /* Substract 1 because of get_irq */
- generic_handle_irq(irq + IRQ_OFFSET - NO_IRQ_OFFSET);
+ generic_handle_irq(irq);
- irq = get_irq(regs);
- if (irq) {
+ irq = get_irq();
+ if (irq != -1U) {
pr_debug("next irq: %d\n", irq);
++concurrent_irq;
goto next_irq;
@@ -48,18 +47,3 @@ next_irq:
set_irq_regs(old_regs);
trace_hardirqs_on();
}
-
-/* MS: There is no any advance mapping mechanism. We are using simple 32bit
- intc without any cascades or any connection that's why mapping is 1:1 */
-unsigned int irq_create_mapping(struct irq_domain *host, irq_hw_number_t hwirq)
-{
- return hwirq + IRQ_OFFSET;
-}
-EXPORT_SYMBOL_GPL(irq_create_mapping);
-
-unsigned int irq_create_of_mapping(struct device_node *controller,
- const u32 *intspec, unsigned int intsize)
-{
- return intspec[0] + IRQ_OFFSET;
-}
-EXPORT_SYMBOL_GPL(irq_create_of_mapping);
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists