lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAObL_7G7CvCVgjR-JYjNDi_Sy65UHXaqas4-sQCVej-4bX2PJA@mail.gmail.com>
Date:	Thu, 16 Feb 2012 16:51:31 -0800
From:	Andrew Lutomirski <luto@....edu>
To:	Indan Zupancic <indan@....nu>
Cc:	"H. Peter Anvin" <hpa@...or.com>, Will Drewry <wad@...omium.org>,
	linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org,
	linux-doc@...r.kernel.org, kernel-hardening@...ts.openwall.com,
	netdev@...r.kernel.org, x86@...nel.org, arnd@...db.de,
	davem@...emloft.net, mingo@...hat.com, oleg@...hat.com,
	peterz@...radead.org, rdunlap@...otime.net, mcgrathr@...omium.org,
	tglx@...utronix.de, eparis@...hat.com, serge.hallyn@...onical.com,
	djm@...drot.org, scarybeasts@...il.com, pmoore@...hat.com,
	akpm@...ux-foundation.org, corbet@....net, eric.dumazet@...il.com,
	markus@...omium.org, keescook@...omium.org
Subject: Re: [PATCH v8 3/8] seccomp: add system call filtering using BPF

On Thu, Feb 16, 2012 at 4:48 PM, Indan Zupancic <indan@....nu> wrote:
> On Thu, February 16, 2012 22:17, H. Peter Anvin wrote:
>> On 02/16/2012 12:25 PM, Will Drewry wrote:
>>>
>>> I agree :)  BPF being a 32-bit creature introduced some edge cases.  I
>>> has started with a
>>>      union { u32 args32[6]; u64 args64[6]; }
>>>
>>> This was somewhat derailed by CONFIG_COMPAT behavior where
>>> syscall_get_arguments always writes to argument of register width --
>>> not bad, just irritating (since a copy isn't strictly necessary nor
>>> actually done in the patch).  Also, Indan pointed out that while BPF
>>> programs expect constants in the machine-local endian layout, any
>>> consumers would need to change how they accessed the arguments across
>>> big/little endian machines since a load of the low-order bits would
>>> vary.
>>>
>>> In a second pass, I attempted to resolve this like aio_abi.h:
>>>     union {
>>>       struct {
>>>          u32 ENDIAN_SWAP(lo32, hi32);
>>>        };
>>>        u64 arg64;
>>>      } args[6];
>>> It wasn't clear that this actually made matters better (though it did
>>> mean syscall_get_arguments() could write directly to arg64).  Usings
>>> offsetof() in the user program would be fine, but any offsets set
>>> another way would be invalid.  At that point, I moved to Indan's
>>> proposal to stabilize low order and high order offsets -- what is in
>>> the patch series.  Now a BPF program can reliably index into the low
>>> bits of an argument and into the high bits without endianness changing
>>> the filter program structure.
>>>
>>> I don't feel strongly about any given data layout, and this one seems
>>> to balance the 32-bit-ness of BPF and the impact that has on
>>> endianness.  I'm happy to hear alternatives that might be more
>>> aesthetically pleasing :)
>>>
>>
>> I would have to say I think native endian is probably the sane thing
>> still, out of several bad alternatives.  Certainly splitting the high
>> and low halves of arguments is insane.
>
> Yes it is. But it can't be avoided because BPF programs are always 32-bit.
> So they have to access the high and low halves separately, one way or the
> other, even on 64-bit machines. With that in mind splitting up the halves
> explicitly seems the best way.
>
> I would go for something like:
>
> struct seccomp_data {
>        int nr;
>        __u32 arg_low[6];
>        __u32 arg_high[6];
>        __u32 instruction_pointer_low;
>        __u32 instruction_pointer_high;
>        __u32 __reserved[3];
> };
>
> (Not sure what use the IP is because that doesn't tell anything about how
> the system call instruction was reached.)
>
> The only way to avoid splitting args is to add 64-bit support to BPF.
> That is probably the best way forwards, but would require breaking the
> BPF ABI by either adding a 64-bit version directly or adding extra
> instructions.
>
> This mismatch between 32-bit BPF programs and 64-bit machines is the main
> reason why I'm not perfectly happy with BPF for syscall filtering. It gets
> the job done, but it's not great.
>
>> The other thing that you really need in addition to system call number
>> is ABI identifier, since a syscall number may mean different things for
>> different entry points.  For example, on x86-64 system call number 4 is
>> write() if called via int $0x80 but stat() if called via syscall64.
>> This is a local property of the system call, not a global per process.
>
> The problem of doing this is that you then force every filter to check for
> the path and do something path specific. The filters that don't do this
> check will be buggy. So the best way is really to install filters per mode
> and call the right filter. If filters are installed but not for the current
> path, the task should be killed.
>
> prctl() should take one more argument which says for which mode the filter
> will be installed for, with 0 for the current mode.
>
> But pushing that info into the filters themselves is not a good idea.

IMO the best solution is to have the One True Seccomp Filter Compiler
(tm).  It would handle multiple namespaces, cross-arch differences,
and such, and it would do it correctly.  It could live in the kernel
tree.

Without something like that or an incredible amount of special care,
actual portability is probably a pipe dream.

--Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ