lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120221083621.11350.4716.stgit@localhost.localdomain>
Date:	Tue, 21 Feb 2012 17:36:21 +0900
From:	Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
To:	Ingo Molnar <mingo@...e.hu>, linux-kernel@...r.kernel.org
Cc:	yrl.pp-manager.tt@...achi.com,
	Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>,
	Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...e.hu>, "H. Peter Anvin" <hpa@...or.com>,
	Ananth N Mavinakayanahalli <ananth@...ibm.com>
Subject: [PATCH v2 -tip] [BUGFIX] x86/kprobes: Fix to recover instructions on
 optimized path

Current probed-instruction recovery expects that only breakpoint
instruction modifies instruction. However, since kprobes jump
optimization can replace original instructions with a jump,
that expectation is not enough. And it may cause instruction
decoding failure on the function where an optimized probe
already exists.

This bug can reproduce easily as below.

1) find a target function address (any kprobe-able function is OK)
 $ grep __secure_computing /proc/kallsyms
ffffffff810c19d0 T __secure_computing

2) decode the function
 $ objdump -d vmlinux --start-address=0xffffffff810c19d0 --stop-address=0xffffffff810c19eb

vmlinux:     file format elf64-x86-64


Disassembly of section .text:

ffffffff810c19d0 <__secure_computing>:
ffffffff810c19d0:       55                      push   %rbp
ffffffff810c19d1:       48 89 e5                mov    %rsp,%rbp
ffffffff810c19d4:       e8 67 8f 72 00          callq  ffffffff817ea940 <mcount>
ffffffff810c19d9:       65 48 8b 04 25 40 b8    mov    %gs:0xb840,%rax
ffffffff810c19e0:       00 00
ffffffff810c19e2:       83 b8 88 05 00 00 01    cmpl   $0x1,0x588(%rax)
ffffffff810c19e9:       74 05                   je     ffffffff810c19f0 <__secure_computing+0x20>

3) put a kprobe-event at an optimize-able place, where no
 call/jump places within the 5 bytes.
 $ su -
 # cd /sys/kernel/debug/tracing
 # echo p __secure_computing+0x9 > kprobe_events

4) enable it and check it is optimized.
 # echo 1 > events/kprobes/p___secure_computing_9/enable
 # cat ../kprobes/list
ffffffff810c19d9  k  __secure_computing+0x9    [OPTIMIZED]

5) put another kprobe on an instruction after previous probe in
  the same function.
 # echo p __secure_computing+0x12 >> kprobe_events
bash: echo: write error: Invalid argument
 # dmesg | tail -n 1
[ 1666.500016] Probing address(0xffffffff810c19e2) is not an instruction boundary.

6) however, if the kprobes optimization is disabled, it works.
 # echo 0 > /proc/sys/debug/kprobes-optimization
 # cat ../kprobes/list
ffffffff810c19d9  k  __secure_computing+0x9
 # echo p __secure_computing+0x12 >> kprobe_events
(no error)

This is because kprobes doesn't recover the instruction
which is overwritten with a relative jump by another kprobe
when finding instruction boundary.
It only recovers the breakpoint instruction.

This patch fixes kprobes to recover such instructions.

With this fix:

 # echo p __secure_computing+0x9 > kprobe_events
 # echo 1 > events/kprobes/p___secure_computing_9/enable
 # cat ../kprobes/list
ffffffff810c1aa9  k  __secure_computing+0x9    [OPTIMIZED]
 # echo p __secure_computing+0x12 >> kprobe_events
 # cat ../kprobes/list
ffffffff810c1aa9  k  __secure_computing+0x9    [OPTIMIZED]
ffffffff810c1ab2  k  __secure_computing+0x12    [DISABLED]


Changes in v2:
 - Fix a bug to recover original instruction address in
   RIP-relative instruction fixup.
 - Moved on tip/master.


Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@...achi.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...e.hu>
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: Ananth N Mavinakayanahalli <ananth@...ibm.com>
---

 arch/x86/kernel/kprobes.c |  115 +++++++++++++++++++++++++++------------------
 include/linux/kprobes.h   |    6 ++
 kernel/kprobes.c          |    2 -
 3 files changed, 77 insertions(+), 46 deletions(-)

diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 7da647d..e91aa75 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -207,13 +207,29 @@ retry:
 	}
 }
 
-/* Recover the probed instruction at addr for further analysis. */
-static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
+/*
+ * Recover the probed instruction at addr for further analysis.
+ * Caller must lock kprobes by kprobe_mutex, or disable preemption
+ * for preventing to release referencing kprobes.
+ */
+static unsigned long recover_probed_instruction(kprobe_opcode_t *buf,
+						unsigned long addr)
 {
 	struct kprobe *kp;
-	kp = get_kprobe((void *)addr);
-	if (!kp)
-		return -EINVAL;
+	int i;
+
+	for (i = 0; i < RELATIVEJUMP_SIZE; i++) {
+		kp = get_kprobe((void *)addr - i);
+		if (kp)
+			goto found;
+	}
+
+	/* There is no probes, return original address */
+	return addr;
+
+found:
+	if (i != 0 && !kprobe_optready(kp))
+		return addr;	/* this probe doesn't affect the instruction */
 
 	/*
 	 *  Basically, kp->ainsn.insn has an original instruction.
@@ -229,15 +245,33 @@ static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
 	 *  from it and kp->opcode.
 	 */
 	memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
-	buf[0] = kp->opcode;
-	return 0;
+	if (i == 0)
+		buf[0] = kp->opcode;
+
+	if (kprobe_optready(kp)) {
+		/*
+		 * If the kprobe can be optimized, original bytes which
+		 * can be overwritten by jump destination address. In this
+		 * case, original bytes must be recovered from
+		 * op->optinsn.copied_insn buffer.
+		 */
+		struct optimized_kprobe *op;
+		op = container_of(kp, struct optimized_kprobe, kp);
+		if (i == 0)
+			memcpy(buf + 1, op->optinsn.copied_insn,
+			       RELATIVE_ADDR_SIZE);
+		else
+			memcpy(buf, op->optinsn.copied_insn + i - 1,
+			       RELATIVE_ADDR_SIZE - i + 1);
+	}
+
+	return (unsigned long)buf;
 }
 
 /* Check if paddr is at an instruction boundary */
 static int __kprobes can_probe(unsigned long paddr)
 {
-	int ret;
-	unsigned long addr, offset = 0;
+	unsigned long addr, __addr, offset = 0;
 	struct insn insn;
 	kprobe_opcode_t buf[MAX_INSN_SIZE];
 
@@ -247,26 +281,24 @@ static int __kprobes can_probe(unsigned long paddr)
 	/* Decode instructions */
 	addr = paddr - offset;
 	while (addr < paddr) {
-		kernel_insn_init(&insn, (void *)addr);
-		insn_get_opcode(&insn);
-
 		/*
 		 * Check if the instruction has been modified by another
 		 * kprobe, in which case we replace the breakpoint by the
 		 * original instruction in our buffer.
+		 * Also, jump optimization will change the breakpoint to
+		 * relative-jump. Since the relative-jump itself is
+		 * normally used, we just go through if there is no kprobe.
 		 */
-		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
-			ret = recover_probed_instruction(buf, addr);
-			if (ret)
-				/*
-				 * Another debugging subsystem might insert
-				 * this breakpoint. In that case, we can't
-				 * recover it.
-				 */
-				return 0;
-			kernel_insn_init(&insn, buf);
-		}
+		__addr = recover_probed_instruction(buf, addr);
+		kernel_insn_init(&insn, (void *)__addr);
 		insn_get_length(&insn);
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+			/*
+			 * Another debugging subsystem might insert
+			 * this breakpoint. In that case, we can't
+			 * recover it.
+			 */
+			return 0;
 		addr += insn.length;
 	}
 
@@ -302,21 +334,17 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
 static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
 {
 	struct insn insn;
-	int ret;
 	kprobe_opcode_t buf[MAX_INSN_SIZE];
+	u8 *orig_src = src;	/* Backup original src for RIP calculation */
+
+	if (recover)
+		src = (u8 *)recover_probed_instruction(buf, (unsigned long)src);
 
 	kernel_insn_init(&insn, src);
-	if (recover) {
-		insn_get_opcode(&insn);
-		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
-			ret = recover_probed_instruction(buf,
-							 (unsigned long)src);
-			if (ret)
-				return 0;
-			kernel_insn_init(&insn, buf);
-		}
-	}
 	insn_get_length(&insn);
+	/* Another subsystem puts a breakpoint, failed to recover */
+	if (recover && insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+		return 0;
 	memcpy(dest, insn.kaddr, insn.length);
 
 #ifdef CONFIG_X86_64
@@ -337,7 +365,7 @@ static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
 		 * extension of the original signed 32-bit displacement would
 		 * have given.
 		 */
-		newdisp = (u8 *) src + (s64) insn.displacement.value -
+		newdisp = (u8 *) orig_src + (s64) insn.displacement.value -
 			  (u8 *) dest;
 		BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check.  */
 		disp = (u8 *) dest + insn_offset_displacement(&insn);
@@ -1271,8 +1299,7 @@ static int insn_jump_into_range(struct insn *insn, unsigned long start, int len)
 /* Decode whole function to ensure any instructions don't jump into target */
 static int __kprobes can_optimize(unsigned long paddr)
 {
-	int ret;
-	unsigned long addr, size = 0, offset = 0;
+	unsigned long addr, __addr, size = 0, offset = 0;
 	struct insn insn;
 	kprobe_opcode_t buf[MAX_INSN_SIZE];
 
@@ -1301,15 +1328,12 @@ static int __kprobes can_optimize(unsigned long paddr)
 			 * we can't optimize kprobe in this function.
 			 */
 			return 0;
-		kernel_insn_init(&insn, (void *)addr);
-		insn_get_opcode(&insn);
-		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
-			ret = recover_probed_instruction(buf, addr);
-			if (ret)
-				return 0;
-			kernel_insn_init(&insn, buf);
-		}
+		__addr = recover_probed_instruction(buf, addr);
+		kernel_insn_init(&insn, (void *)__addr);
 		insn_get_length(&insn);
+		/* Another subsystem puts a breakpoint */
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
+			return 0;
 		/* Recover address */
 		insn.kaddr = (void *)addr;
 		insn.next_byte = (void *)(addr + insn.length);
@@ -1366,6 +1390,7 @@ void __kprobes arch_remove_optimized_kprobe(struct optimized_kprobe *op)
 /*
  * Copy replacing target instructions
  * Target instructions MUST be relocatable (checked inside)
+ * This is called when new aggr(opt)probe is allocated or reused.
  */
 int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
 {
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index dce6e4d..6abec49 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -293,6 +293,12 @@ extern int proc_kprobes_optimization_handler(struct ctl_table *table,
 					     size_t *length, loff_t *ppos);
 #endif
 
+extern int kprobe_optready(struct kprobe *p);
+#else /* CONFIG_OPTPROBES */
+static inline int kprobe_optready(struct kprobe *p)
+{
+	return 0;
+}
 #endif /* CONFIG_OPTPROBES */
 
 /* Get the kprobe at this addr (if any) - called with preemption disabled */
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 9788c0e..c52c68b 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -403,7 +403,7 @@ static __kprobes void free_aggr_kprobe(struct kprobe *p)
 }
 
 /* Return true(!0) if the kprobe is ready for optimization. */
-static inline int kprobe_optready(struct kprobe *p)
+int kprobe_optready(struct kprobe *p)
 {
 	struct optimized_kprobe *op;
 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ