| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4F482E0C.2000604@panasas.com>
Date: Fri, 24 Feb 2012 16:40:44 -0800
From: Boaz Harrosh <bharrosh@...asas.com>
To: James Bottomley <James.Bottomley@...senPartnership.com>
CC: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: [GIT PULL] SCSI fixes for 3.3-rc4
On 02/24/2012 03:29 PM, James Bottomley wrote:
> This is a set of assorted bug fixes for power management, mpt2sas, ipr,
> the rdac device handler and quite a big chunk for qla2xxx (plus a use
> after free of scsi_host in scsi_scan.c).
>
James? what's up?
I sent you, what is for me a very important fix, also targeted for stable
which is a one liner. I don't see it below. Do you plan on another scsi-fixes
batch?
If not than please send me your ack and I can push it through the exofs tree
since the most affected systems by this is any objects cluster like exofs+pnfs
type systems.
Thanks
Boaz
> The patch is available here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git scsi-fixes
>
> The short changelog is
>
> Alan Stern (1):
> scsi_pm: Fix bug in the SCSI power management handler
>
> Alexey Khoroshilov (1):
> mpt2sas: Fix mismatch in mpt2sas_base_hard_reset_handler() mutex lock-unlock
>
> Andrew Vasquez (4):
> qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.
> qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
> qla2xxx: Clear options-flags while issuing stop-firmware mbx command.
> qla2xxx: Add an "is reset active" helper.
>
> Arun Easi (1):
> qla2xxx: Propagate up abort failures.
>
> Chad Dupuis (2):
> qla2xxx: Update version number to 8.03.07.13-k.
> qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.
>
> Dave Jiang (1):
> isci: Fix NULL ptr dereference when no firmware is being loaded
>
> Giridhar Malavali (2):
> qla2xxx: Proper detection of firmware abort error code for ISP82xx.
> qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle.
>
> Huajun Li (1):
> scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost'
>
> Kleber Sacilotto de Souza (1):
> ipr: fix eeh recovery for 64-bit adapters
>
> Michael Christie (1):
> qla2xxx: Remove check for null fcport from host reset handler.
>
> Moger, Babu (1):
> scsi_dh_rdac: Fix for unbalanced reference count
>
> Shyam Sundar (1):
> qla2xxx: Remove resetting memory during device initialization for ISP82xx.
>
> The diffstat is:
>
> drivers/scsi/device_handler/scsi_dh_rdac.c | 25 ++++++++------
> drivers/scsi/ipr.c | 24 ++++++++++---
> drivers/scsi/isci/host.c | 4 ++-
> drivers/scsi/mpt2sas/mpt2sas_base.c | 3 +-
> drivers/scsi/qla2xxx/qla_attr.c | 13 ++-----
> drivers/scsi/qla2xxx/qla_bsg.c | 50 +++++-----------------------
> drivers/scsi/qla2xxx/qla_dbg.c | 3 +-
> drivers/scsi/qla2xxx/qla_def.h | 1 +
> drivers/scsi/qla2xxx/qla_inline.h | 13 +++++++
> drivers/scsi/qla2xxx/qla_isr.c | 1 -
> drivers/scsi/qla2xxx/qla_mbx.c | 7 +++-
> drivers/scsi/qla2xxx/qla_nx.c | 15 +--------
> drivers/scsi/qla2xxx/qla_os.c | 19 ++++------
> drivers/scsi/qla2xxx/qla_version.h | 2 +-
> drivers/scsi/scsi_pm.c | 16 +++++++++
> drivers/scsi/scsi_priv.h | 1 +
> drivers/scsi/scsi_scan.c | 4 +-
> 17 files changed, 101 insertions(+), 100 deletions(-)
>
> And the full diff is attached below.
>
> James
>
> ---
>
> diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
> index 53a31c7..20c4557 100644
> --- a/drivers/scsi/device_handler/scsi_dh_rdac.c
> +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
> @@ -364,10 +364,7 @@ static void release_controller(struct kref *kref)
> struct rdac_controller *ctlr;
> ctlr = container_of(kref, struct rdac_controller, kref);
>
> - flush_workqueue(kmpath_rdacd);
> - spin_lock(&list_lock);
> list_del(&ctlr->node);
> - spin_unlock(&list_lock);
> kfree(ctlr);
> }
>
> @@ -376,20 +373,17 @@ static struct rdac_controller *get_controller(int index, char *array_name,
> {
> struct rdac_controller *ctlr, *tmp;
>
> - spin_lock(&list_lock);
> -
> list_for_each_entry(tmp, &ctlr_list, node) {
> if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
> (tmp->index == index) &&
> (tmp->host == sdev->host)) {
> kref_get(&tmp->kref);
> - spin_unlock(&list_lock);
> return tmp;
> }
> }
> ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
> if (!ctlr)
> - goto done;
> + return NULL;
>
> /* initialize fields of controller */
> memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
> @@ -405,8 +399,7 @@ static struct rdac_controller *get_controller(int index, char *array_name,
> INIT_WORK(&ctlr->ms_work, send_mode_select);
> INIT_LIST_HEAD(&ctlr->ms_head);
> list_add(&ctlr->node, &ctlr_list);
> -done:
> - spin_unlock(&list_lock);
> +
> return ctlr;
> }
>
> @@ -517,9 +510,12 @@ static int initialize_controller(struct scsi_device *sdev,
> index = 0;
> else
> index = 1;
> +
> + spin_lock(&list_lock);
> h->ctlr = get_controller(index, array_name, array_id, sdev);
> if (!h->ctlr)
> err = SCSI_DH_RES_TEMP_UNAVAIL;
> + spin_unlock(&list_lock);
> }
> return err;
> }
> @@ -906,7 +902,9 @@ static int rdac_bus_attach(struct scsi_device *sdev)
> return 0;
>
> clean_ctlr:
> + spin_lock(&list_lock);
> kref_put(&h->ctlr->kref, release_controller);
> + spin_unlock(&list_lock);
>
> failed:
> kfree(scsi_dh_data);
> @@ -921,14 +919,19 @@ static void rdac_bus_detach( struct scsi_device *sdev )
> struct rdac_dh_data *h;
> unsigned long flags;
>
> - spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
> scsi_dh_data = sdev->scsi_dh_data;
> + h = (struct rdac_dh_data *) scsi_dh_data->buf;
> + if (h->ctlr && h->ctlr->ms_queued)
> + flush_workqueue(kmpath_rdacd);
> +
> + spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
> sdev->scsi_dh_data = NULL;
> spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
>
> - h = (struct rdac_dh_data *) scsi_dh_data->buf;
> + spin_lock(&list_lock);
> if (h->ctlr)
> kref_put(&h->ctlr->kref, release_controller);
> + spin_unlock(&list_lock);
> kfree(scsi_dh_data);
> module_put(THIS_MODULE);
> sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
> diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
> index 67b169b..b538f08 100644
> --- a/drivers/scsi/ipr.c
> +++ b/drivers/scsi/ipr.c
> @@ -4613,11 +4613,13 @@ static int __ipr_eh_host_reset(struct scsi_cmnd * scsi_cmd)
> ENTER;
> ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
>
> - dev_err(&ioa_cfg->pdev->dev,
> - "Adapter being reset as a result of error recovery.\n");
> + if (!ioa_cfg->in_reset_reload) {
> + dev_err(&ioa_cfg->pdev->dev,
> + "Adapter being reset as a result of error recovery.\n");
>
> - if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
> - ioa_cfg->sdt_state = GET_DUMP;
> + if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
> + ioa_cfg->sdt_state = GET_DUMP;
> + }
>
> rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
>
> @@ -4907,7 +4909,7 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
> struct ipr_ioa_cfg *ioa_cfg;
> struct ipr_resource_entry *res;
> struct ipr_cmd_pkt *cmd_pkt;
> - u32 ioasc;
> + u32 ioasc, int_reg;
> int op_found = 0;
>
> ENTER;
> @@ -4920,7 +4922,17 @@ static int ipr_cancel_op(struct scsi_cmnd * scsi_cmd)
> */
> if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
> return FAILED;
> - if (!res || !ipr_is_gscsi(res))
> + if (!res)
> + return FAILED;
> +
> + /*
> + * If we are aborting a timed out op, chances are that the timeout was caused
> + * by a still not detected EEH error. In such cases, reading a register will
> + * trigger the EEH recovery infrastructure.
> + */
> + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
> +
> + if (!ipr_is_gscsi(res))
> return FAILED;
>
> list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
> diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
> index 1a65d65..418391b 100644
> --- a/drivers/scsi/isci/host.c
> +++ b/drivers/scsi/isci/host.c
> @@ -1848,9 +1848,11 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
> if (state == SCIC_RESET ||
> state == SCIC_INITIALIZING ||
> state == SCIC_INITIALIZED) {
> + u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version :
> + ISCI_ROM_VER_1_0;
>
> if (sci_oem_parameters_validate(&ihost->oem_parameters,
> - pci_info->orom->hdr.version))
> + oem_version))
> return SCI_FAILURE_INVALID_PARAMETER_VALUE;
>
> return SCI_SUCCESS;
> diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
> index 0b2c955..a78036f 100644
> --- a/drivers/scsi/mpt2sas/mpt2sas_base.c
> +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
> @@ -4548,7 +4548,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
> printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
> ioc->name, __func__);
> r = 0;
> - goto out;
> + goto out_unlocked;
> }
>
> if (mpt2sas_fwfault_debug)
> @@ -4604,6 +4604,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
> spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
> mutex_unlock(&ioc->reset_in_progress_mutex);
>
> + out_unlocked:
> dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
> __func__));
> return r;
> diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
> index a2f1b30..9f41b3b 100644
> --- a/drivers/scsi/qla2xxx/qla_attr.c
> +++ b/drivers/scsi/qla2xxx/qla_attr.c
> @@ -1036,8 +1036,7 @@ qla2x00_link_state_show(struct device *dev, struct device_attribute *attr,
> vha->device_flags & DFLG_NO_CABLE)
> len = snprintf(buf, PAGE_SIZE, "Link Down\n");
> else if (atomic_read(&vha->loop_state) != LOOP_READY ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
> + qla2x00_reset_active(vha))
> len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
> else {
> len = snprintf(buf, PAGE_SIZE, "Link Up - ");
> @@ -1359,8 +1358,7 @@ qla2x00_thermal_temp_show(struct device *dev,
> return snprintf(buf, PAGE_SIZE, "\n");
>
> temp = frac = 0;
> - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
> + if (qla2x00_reset_active(vha))
> ql_log(ql_log_warn, vha, 0x707b,
> "ISP reset active.\n");
> else if (!vha->hw->flags.eeh_busy)
> @@ -1379,8 +1377,7 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
> int rval = QLA_FUNCTION_FAILED;
> uint16_t state[5];
>
> - if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
> + if (qla2x00_reset_active(vha))
> ql_log(ql_log_warn, vha, 0x707c,
> "ISP reset active.\n");
> else if (!vha->hw->flags.eeh_busy)
> @@ -1693,9 +1690,7 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
> if (IS_FWI2_CAPABLE(ha)) {
> rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
> } else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
> - !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
> - !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
> - !ha->dpc_active) {
> + !qla2x00_reset_active(vha) && !ha->dpc_active) {
> /* Must be in a 'READY' state for statistics retrieval. */
> rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
> stats, stats_dma);
> diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
> index b1d0f93..1682e2e 100644
> --- a/drivers/scsi/qla2xxx/qla_bsg.c
> +++ b/drivers/scsi/qla2xxx/qla_bsg.c
> @@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
> goto exit_fcp_prio_cfg;
> }
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
> - ret = -EBUSY;
> - goto exit_fcp_prio_cfg;
> - }
> -
> /* Get the sub command */
> oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
>
> @@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
> dma_addr_t rsp_data_dma;
> uint32_t rsp_data_len;
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
> - ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
> - return -EBUSY;
> - }
> -
> if (!vha->flags.online) {
> ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
> return -EIO;
> @@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job)
> int rval = 0;
> uint32_t flag;
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
> - ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
> - return -EBUSY;
> - }
> -
> if (!IS_QLA84XX(ha)) {
> ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
> return -EINVAL;
> @@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
> uint32_t flag;
> uint32_t fw_ver;
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
> - return -EBUSY;
> -
> if (!IS_QLA84XX(ha)) {
> ql_dbg(ql_dbg_user, vha, 0x7032,
> "Not 84xx, exiting.\n");
> @@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
> uint32_t data_len = 0;
> uint32_t dma_direction = DMA_NONE;
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
> - ql_log(ql_log_warn, vha, 0x7039,
> - "Abort active or needed.\n");
> - return -EBUSY;
> - }
> -
> if (!IS_QLA84XX(ha)) {
> ql_log(ql_log_warn, vha, 0x703a,
> "Not 84xx, exiting.\n");
> @@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
>
> bsg_job->reply->reply_payload_rcv_len = 0;
>
> - if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> - test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
> - test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
> - ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
> - return -EBUSY;
> - }
> -
> if (!IS_IIDMA_CAPABLE(vha->hw)) {
> ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
> return -EINVAL;
> @@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
> vha = shost_priv(host);
> }
>
> + if (qla2x00_reset_active(vha)) {
> + ql_dbg(ql_dbg_user, vha, 0x709f,
> + "BSG: ISP abort active/needed -- cmd=%d.\n",
> + bsg_job->request->msgcode);
> + bsg_job->reply->result = (DID_ERROR << 16);
> + bsg_job->job_done(bsg_job);
> + return -EBUSY;
> + }
> +
> ql_dbg(ql_dbg_user, vha, 0x7000,
> "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
>
> diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
> index 7c54624..45cbf0b 100644
> --- a/drivers/scsi/qla2xxx/qla_dbg.c
> +++ b/drivers/scsi/qla2xxx/qla_dbg.c
> @@ -19,7 +19,8 @@
> * | DPC Thread | 0x401c | |
> * | Async Events | 0x5057 | 0x5052 |
> * | Timer Routines | 0x6011 | 0x600e,0x600f |
> - * | User Space Interactions | 0x709e | |
> + * | User Space Interactions | 0x709e | 0x7018,0x702e |
> + * | | | 0x7039,0x7045 |
> * | Task Management | 0x803c | 0x8025-0x8026 |
> * | | | 0x800b,0x8039 |
> * | AER/EEH | 0x900f | |
> diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
> index a6a4eeb..af1003f 100644
> --- a/drivers/scsi/qla2xxx/qla_def.h
> +++ b/drivers/scsi/qla2xxx/qla_def.h
> @@ -44,6 +44,7 @@
> * ISP2100 HBAs.
> */
> #define MAILBOX_REGISTER_COUNT_2100 8
> +#define MAILBOX_REGISTER_COUNT_2200 24
> #define MAILBOX_REGISTER_COUNT 32
>
> #define QLA2200A_RISC_ROM_VER 4
> diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
> index 9902834..7cc4f36 100644
> --- a/drivers/scsi/qla2xxx/qla_inline.h
> +++ b/drivers/scsi/qla2xxx/qla_inline.h
> @@ -131,3 +131,16 @@ qla2x00_hba_err_chk_enabled(srb_t *sp)
> }
> return 0;
> }
> +
> +static inline int
> +qla2x00_reset_active(scsi_qla_host_t *vha)
> +{
> + scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
> +
> + /* Test appropriate base-vha and vha flags. */
> + return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
> + test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
> + test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
> + test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
> + test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
> +}
> diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
> index e804585..349843e 100644
> --- a/drivers/scsi/qla2xxx/qla_isr.c
> +++ b/drivers/scsi/qla2xxx/qla_isr.c
> @@ -2090,7 +2090,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
> break;
> case CT_IOCB_TYPE:
> qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
> - clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
> break;
> case ELS_IOCB_TYPE:
> qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
> diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
> index 34344d3..08f1d01 100644
> --- a/drivers/scsi/qla2xxx/qla_mbx.c
> +++ b/drivers/scsi/qla2xxx/qla_mbx.c
> @@ -342,6 +342,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
>
> set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
> clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
> + /* Allow next mbx cmd to come in. */
> + complete(&ha->mbx_cmd_comp);
> if (ha->isp_ops->abort_isp(vha)) {
> /* Failed. retry later. */
> set_bit(ISP_ABORT_NEEDED,
> @@ -350,6 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
> clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
> ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
> "Finished abort_isp.\n");
> + goto mbx_done;
> }
> }
> }
> @@ -358,6 +361,7 @@ premature_exit:
> /* Allow next mbx cmd to come in. */
> complete(&ha->mbx_cmd_comp);
>
> +mbx_done:
> if (rval) {
> ql_dbg(ql_dbg_mbx, base_vha, 0x1020,
> "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n",
> @@ -2581,7 +2585,8 @@ qla2x00_stop_firmware(scsi_qla_host_t *vha)
> ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__);
>
> mcp->mb[0] = MBC_STOP_FIRMWARE;
> - mcp->out_mb = MBX_0;
> + mcp->mb[1] = 0;
> + mcp->out_mb = MBX_1|MBX_0;
> mcp->in_mb = MBX_0;
> mcp->tov = 5;
> mcp->flags = 0;
> diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
> index 1cd46cd..270ba31 100644
> --- a/drivers/scsi/qla2xxx/qla_nx.c
> +++ b/drivers/scsi/qla2xxx/qla_nx.c
> @@ -1165,19 +1165,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
> qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
> else
> qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
> -
> - /* reset ms */
> - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
> - val |= (1 << 1);
> - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
> - msleep(20);
> -
> - /* unreset ms */
> - val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
> - val &= ~(1 << 1);
> - qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
> - msleep(20);
> -
> qla82xx_rom_unlock(ha);
>
> /* Read the signature value from the flash.
> @@ -3392,7 +3379,7 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
> QLA82XX_CRB_PEG_NET_3 + 0x3c),
> qla82xx_rd_32(ha,
> QLA82XX_CRB_PEG_NET_4 + 0x3c));
> - if (LSW(MSB(halt_status)) == 0x67)
> + if (((halt_status & 0x1fffff00) >> 8) == 0x67)
> ql_log(ql_log_warn, vha, 0xb052,
> "Firmware aborted with "
> "error code 0x00006700. Device is "
> diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
> index 4ed1e4a..036030c 100644
> --- a/drivers/scsi/qla2xxx/qla_os.c
> +++ b/drivers/scsi/qla2xxx/qla_os.c
> @@ -625,6 +625,12 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
> cmd->result = DID_NO_CONNECT << 16;
> goto qc24_fail_command;
> }
> +
> + if (!fcport) {
> + cmd->result = DID_NO_CONNECT << 16;
> + goto qc24_fail_command;
> + }
> +
> if (atomic_read(&fcport->state) != FCS_ONLINE) {
> if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
> atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
> @@ -877,6 +883,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
>
> spin_unlock_irqrestore(&ha->hardware_lock, flags);
> if (ha->isp_ops->abort_command(sp)) {
> + ret = FAILED;
> ql_dbg(ql_dbg_taskm, vha, 0x8003,
> "Abort command mbx failed cmd=%p.\n", cmd);
> } else {
> @@ -1124,7 +1131,6 @@ static int
> qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
> {
> scsi_qla_host_t *vha = shost_priv(cmd->device->host);
> - fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
> struct qla_hw_data *ha = vha->hw;
> int ret = FAILED;
> unsigned int id, lun;
> @@ -1133,15 +1139,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
> id = cmd->device->id;
> lun = cmd->device->lun;
>
> - if (!fcport) {
> - return ret;
> - }
> -
> - ret = fc_block_scsi_eh(cmd);
> - if (ret != 0)
> - return ret;
> - ret = FAILED;
> -
> ql_log(ql_log_info, vha, 0x8018,
> "ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun);
>
> @@ -2047,7 +2044,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
> ha->nvram_data_off = ~0;
> ha->isp_ops = &qla2100_isp_ops;
> } else if (IS_QLA2200(ha)) {
> - ha->mbx_count = MAILBOX_REGISTER_COUNT;
> + ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
> req_length = REQUEST_ENTRY_CNT_2200;
> rsp_length = RESPONSE_ENTRY_CNT_2100;
> ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
> diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
> index 23f33a6..29d780c 100644
> --- a/drivers/scsi/qla2xxx/qla_version.h
> +++ b/drivers/scsi/qla2xxx/qla_version.h
> @@ -7,7 +7,7 @@
> /*
> * Driver version
> */
> -#define QLA2XXX_VERSION "8.03.07.12-k"
> +#define QLA2XXX_VERSION "8.03.07.13-k"
>
> #define QLA_DRIVER_MAJOR_VER 8
> #define QLA_DRIVER_MINOR_VER 3
> diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
> index bf8bf79..c467064 100644
> --- a/drivers/scsi/scsi_pm.c
> +++ b/drivers/scsi/scsi_pm.c
> @@ -7,6 +7,7 @@
>
> #include <linux/pm_runtime.h>
> #include <linux/export.h>
> +#include <linux/async.h>
>
> #include <scsi/scsi.h>
> #include <scsi/scsi_device.h>
> @@ -92,6 +93,19 @@ static int scsi_bus_resume_common(struct device *dev)
> return err;
> }
>
> +static int scsi_bus_prepare(struct device *dev)
> +{
> + if (scsi_is_sdev_device(dev)) {
> + /* sd probing uses async_schedule. Wait until it finishes. */
> + async_synchronize_full();
> +
> + } else if (scsi_is_host_device(dev)) {
> + /* Wait until async scanning is finished */
> + scsi_complete_async_scans();
> + }
> + return 0;
> +}
> +
> static int scsi_bus_suspend(struct device *dev)
> {
> return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
> @@ -110,6 +124,7 @@ static int scsi_bus_poweroff(struct device *dev)
> #else /* CONFIG_PM_SLEEP */
>
> #define scsi_bus_resume_common NULL
> +#define scsi_bus_prepare NULL
> #define scsi_bus_suspend NULL
> #define scsi_bus_freeze NULL
> #define scsi_bus_poweroff NULL
> @@ -218,6 +233,7 @@ void scsi_autopm_put_host(struct Scsi_Host *shost)
> #endif /* CONFIG_PM_RUNTIME */
>
> const struct dev_pm_ops scsi_bus_pm_ops = {
> + .prepare = scsi_bus_prepare,
> .suspend = scsi_bus_suspend,
> .resume = scsi_bus_resume_common,
> .freeze = scsi_bus_freeze,
> diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
> index 68eadd1..be4fa6d 100644
> --- a/drivers/scsi/scsi_priv.h
> +++ b/drivers/scsi/scsi_priv.h
> @@ -109,6 +109,7 @@ extern void scsi_exit_procfs(void);
> #endif /* CONFIG_PROC_FS */
>
> /* scsi_scan.c */
> +extern int scsi_complete_async_scans(void);
> extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
> unsigned int, unsigned int, int);
> extern void scsi_forget_host(struct Scsi_Host *);
> diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
> index 89da43f..29c4c04 100644
> --- a/drivers/scsi/scsi_scan.c
> +++ b/drivers/scsi/scsi_scan.c
> @@ -1815,6 +1815,7 @@ static void scsi_finish_async_scan(struct async_scan_data *data)
> }
> spin_unlock(&async_scan_lock);
>
> + scsi_autopm_put_host(shost);
> scsi_host_put(shost);
> kfree(data);
> }
> @@ -1841,7 +1842,6 @@ static int do_scan_async(void *_data)
>
> do_scsi_scan_host(shost);
> scsi_finish_async_scan(data);
> - scsi_autopm_put_host(shost);
> return 0;
> }
>
> @@ -1869,7 +1869,7 @@ void scsi_scan_host(struct Scsi_Host *shost)
> p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
> if (IS_ERR(p))
> do_scan_async(data);
> - /* scsi_autopm_put_host(shost) is called in do_scan_async() */
> + /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
> }
> EXPORT_SYMBOL(scsi_scan_host);
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists