groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: disassociating by local choice (reason=3) wlan0: direct probe to AP 54:e6:fc:98:63:fe try 1 wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\done (42574 pages freed) PM: Freed 170296 kbytes in 5.93 seconds (28.71 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125990 pages PM: Normal pages needed: 125990 + 1024 + 38, available pages: 383456 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.04 BogoMIPS (lpj=2793022) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 02:24:8c:7f:51:0a try 1 wlan0: direct probe to AP 02:24:8c:7f:51:0a try 2 wlan0 direct probe responded wlan0: authenticate with AP 02:24:8c:7f:51:0a wlan0: authenticated wlan0: associate with AP 02:24:8c:7f:51:0a wlan0: associate with AP 02:24:8c:7f:51:0a wlan0: RX AssocResp from 02:24:8c:7f:51:0a (capab=0x401 status=0 aid=1) wlan0: associated CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: disassociating by local choice (reason=3) wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: direct probe to AP 54:e6:fc:98:63:fe try 1 wlan0 direct probe responded wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated wlan0: deauthenticating by local choice (reason=3) wlan0: No STA entry for own AP 54:e6:fc:98:63:fe PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\done (75567 pages freed) PM: Freed 302268 kbytes in 11.38 seconds (26.56 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 126288 pages PM: Normal pages needed: 126288 + 1024 + 38, available pages: 383154 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.02 BogoMIPS (lpj=2793011) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 02:24:8c:7f:51:0a try 1 wlan0: direct probe to AP 02:24:8c:7f:51:0a try 1 wlan0 direct probe responded wlan0: authenticate with AP 02:24:8c:7f:51:0a wlan0: authenticated wlan0: associate with AP 02:24:8c:7f:51:0a wlan0: RX AssocResp from 02:24:8c:7f:51:0a (capab=0x401 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: direct probe to AP 54:e6:fc:98:63:fe try 1 wlan0: direct probe to AP 54:e6:fc:98:63:fe try 1 wlan0 direct probe responded wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\done (105268 pages freed) PM: Freed 421072 kbytes in 14.56 seconds (28.91 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 126129 pages PM: Normal pages needed: 126129 + 1024 + 38, available pages: 383314 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.09 BogoMIPS (lpj=2793045) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 1 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 1 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 2 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 3 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 timed out wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 1 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/done (140671 pages freed) PM: Freed 562684 kbytes in 17.17 seconds (32.77 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125929 pages PM: Normal pages needed: 125929 + 1024 + 38, available pages: 383507 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5585.97 BogoMIPS (lpj=2792985) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... <5>firewire_core: rediscovered device fw0 done. PM: Basic memory bitmaps freed ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: disassociating by local choice (reason=3) wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/-\|done (169560 pages freed) PM: Freed 678240 kbytes in 25.43 seconds (26.67 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125839 pages PM: Normal pages needed: 125839 + 1024 + 38, available pages: 383604 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.01 BogoMIPS (lpj=2793008) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: disassociating by local choice (reason=3) wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/-\|/-\done (205017 pages freed) PM: Freed 820068 kbytes in 31.90 seconds (25.70 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 126130 pages PM: Normal pages needed: 126130 + 1024 + 38, available pages: 383311 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.06 BogoMIPS (lpj=2793033) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/-\|/-\|/-done (234403 pages freed) PM: Freed 937612 kbytes in 29.57 seconds (31.70 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125947 pages PM: Normal pages needed: 125947 + 1024 + 38, available pages: 383489 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5164.33 BogoMIPS (lpj=2582166) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 02:24:8c:7f:51:0a try 1 wlan0 direct probe responded wlan0: authenticate with AP 02:24:8c:7f:51:0a wlan0: authenticated wlan0: associate with AP 02:24:8c:7f:51:0a wlan0: RX AssocResp from 02:24:8c:7f:51:0a (capab=0x401 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: no IPv6 routers present wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: disassociating by local choice (reason=3) wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: deauthenticating by local choice (reason=3) wlan0: direct probe to AP 00:00:00:00:00:00 try 1 PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\done (44042 pages freed) PM: Freed 176168 kbytes in 7.30 seconds (24.13 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 126254 pages PM: Normal pages needed: 126254 + 1024 + 38, available pages: 383184 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.05 BogoMIPS (lpj=2793026) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-done (74193 pages freed) PM: Freed 296772 kbytes in 9.22 seconds (32.18 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125862 pages PM: Normal pages needed: 125862 + 1024 + 38, available pages: 383583 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.01 BogoMIPS (lpj=2793005) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/done (108485 pages freed) PM: Freed 433940 kbytes in 12.78 seconds (33.95 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125855 pages PM: Normal pages needed: 125855 + 1024 + 38, available pages: 383591 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4839.78 BogoMIPS (lpj=2419893) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/done (137790 pages freed) PM: Freed 551160 kbytes in 19.65 seconds (28.04 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125948 pages PM: Normal pages needed: 125948 + 1024 + 38, available pages: 383498 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.02 BogoMIPS (lpj=2793012) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/-\|/done (172227 pages freed) PM: Freed 688908 kbytes in 30.31 seconds (22.72 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 126287 pages PM: Normal pages needed: 126287 + 1024 + 38, available pages: 383151 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6396.11 BogoMIPS (lpj=3198057) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... done. PM: Basic memory bitmaps freed firewire_core: rediscovered device fw0 ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 1 wlan0: direct probe to AP 00:15:f2:88:fa:36 try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 00:15:f2:88:fa:36 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authentication with AP 00:15:f2:88:fa:36 timed out wlan0: authenticate with AP 00:15:f2:88:fa:36 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: deauthenticating by local choice (reason=3) PM: Hibernation mode set to 'reboot' PM: Marking nosave pages: 000000000009e000 - 0000000000100000 PM: Marking nosave pages: 000000007c4a1000 - 000000007c4a7000 PM: Marking nosave pages: 000000007c5b7000 - 000000007c60f000 PM: Marking nosave pages: 000000007c6c6000 - 000000007c9ff000 PM: Basic memory bitmaps created PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Shrinking memory... -\|/-\|/-\|/-\|/-\|/-\done (202233 pages freed) PM: Freed 808932 kbytes in 31.48 seconds (25.69 MB/s) Suspending console(s) (use no_console_suspend to debug) sd 0:0:0:0: [sda] Synchronizing SCSI cache ACPI handle has no context! sdhci-pci 0000:15:00.2: PME# disabled sdhci-pci 0000:15:00.2: PCI INT C disabled ACPI handle has no context! ACPI handle has no context! ehci_hcd 0000:00:1d.7: PCI INT D disabled ehci_hcd 0000:00:1d.7: PME# disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY HDA Intel 0000:00:1b.0: PCI INT B disabled ehci_hcd 0000:00:1a.7: PCI INT D disabled ehci_hcd 0000:00:1a.7: PME# disabled uhci_hcd 0000:00:1a.2: PCI INT C disabled uhci_hcd 0000:00:1a.1: PCI INT B disabled uhci_hcd 0000:00:1a.0: PCI INT A disabled e1000e 0000:00:19.0: PCI INT A disabled e1000e 0000:00:19.0: PME# enabled e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! [drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 ricoh-mmc: Suspending. ricoh-mmc: Controller is now re-enabled. Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. SMP alternatives: switching to UP code CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching NULL sched-domain. CPU1 is down Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 125990 pages PM: Normal pages needed: 125990 + 1024 + 38, available pages: 383453 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 CPU0: Thermal monitoring handled by SMI Extended CMOS year: 2000 Enabling non-boot CPUs ... lockdep: fixing up alternatives. SMP alternatives: switching to SMP code Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.02 BogoMIPS (lpj=2793014) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 CPU0 attaching NULL sched-domain. Switched to high resolution mode on CPU 1 CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 CPU1 is up pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001) uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010b, writing 0x580010b) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x822010, writing 0x82a810) yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100107, writing 0x2100007) ricoh-mmc: Resuming. ricoh-mmc: Controller is now disabled. i915 0000:00:02.0: setting latency timer to 64 [drm] LVDS-8: set mode 1680x1050 11 ============================================================================= BUG kmalloc-192 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff880079198340-0xffff88007919835f. First byte 0x0 instead of 0x6b INFO: Allocated in fib_create_info+0x331/0xbaf age=89259 cpu=0 pid=1715 INFO: Freed in free_fib_info+0x59/0x5b age=32977 cpu=1 pid=1715 INFO: Slab 0xffffe200031325c0 objects=31 used=27 fp=0xffff880079198318 flags=0x200000000040c3 INFO: Object 0xffff880079198318 @offset=792 fp=0xffff880079198108 Bytes b4 0xffff880079198308: e8 4c 21 00 01 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a čL!.....ZZZZZZZZ Object 0xffff880079198318: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880079198328: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880079198338: 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 00 00 00 00 kkkkkkkk........ Object 0xffff880079198348: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object 0xffff880079198358: 00 00 00 00 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk Object 0xffff880079198368: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880079198378: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880079198388: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff880079198398: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff8800791983a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff8800791983b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff8800791983c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkkĄ Redzone 0xffff8800791983d8: bb bb bb bb bb bb bb bb »»»»»»»» Padding 0xffff880079198418: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 12350, comm: pm-hibernate Not tainted 2.6.30.10-105.2.23.fc11.x86_64.debug #1 Call Trace: [] print_trailer+0x140/0x149 [] check_bytes_and_report+0xba/0xeb [] check_object+0xca/0x1ae [] __slab_alloc+0x2f9/0x3a3 [] ? kcalloc.clone.0+0x2f/0x31 [i915] [] __kmalloc+0x116/0x196 [] ? kcalloc.clone.0+0x2f/0x31 [i915] [] kcalloc.clone.0+0x2f/0x31 [i915] [] i915_gem_init_object+0x20/0x64 [i915] [] drm_gem_object_alloc+0xb0/0xeb [drm] [] i915_gem_init_ringbuffer+0x1cd/0x47e [i915] [] i915_resume+0x9d/0xc7 [i915] [] i915_pci_resume+0x15/0x17 [i915] [] pci_legacy_resume+0x38/0x47 [] pci_pm_restore+0x54/0x87 [] pm_op+0xbd/0xea [] device_resume+0xec/0x469 [] hibernation_snapshot+0x1e8/0x22c [] hibernate+0xe5/0x1a9 [] state_store+0x5c/0xd3 [] kobj_attr_store+0x17/0x19 [] sysfs_write_file+0xfb/0x137 [] vfs_write+0xae/0x10b [] sys_write+0x4a/0x6e [] system_call_fastpath+0x16/0x1b FIX kmalloc-192: Restoring 0xffff880079198340-0xffff88007919835f=0x6b FIX kmalloc-192: Marking all objects used pci 0000:00:02.1: PME# disabled pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: PME# disabled e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: PME# disabled e1000e 0000:00:19.0: irq 30 for MSI/MSI-X uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: PME# disabled HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 firewire_core: skipped bus generations, destroying all nodes sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: PME# disabled sd 0:0:0:0: [sda] Starting disk ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata1: irq_stat 0x00400040, connection status changed ata1.00: configured for UDMA/100 ata1: EH complete PM: Image restored successfully. ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 Restarting tasks ... <5>firewire_core: rediscovered device fw0 done. PM: Basic memory bitmaps freed ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 ata2: irq_stat 0x40000001 ata2.00: configured for UDMA/133 ata2: EH complete e1000e 0000:00:19.0: irq 30 for MSI/MSI-X e1000e 0000:00:19.0: irq 30 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 1 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 2 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 try 3 wlan0: direct probe to AP 00:60:b3:c5:c3:d3 timed out wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: authenticate with AP 54:e6:fc:98:63:fe wlan0: authenticated wlan0: associate with AP 54:e6:fc:98:63:fe wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=2) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present