Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.3.0-rc4-wl+ (test@dhcp-27-55.brq.redhat.com) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Wed Feb 22 20:05:27 CET 2012 Command line: root=/dev/mapper/vg_dhcp2755-lv_root ro rd_LVM_LV=vg_dhcp2755/lv_root rd_LVM_LV=vg_dhcp2755/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=196M rhgb drm.debug=0x04 console=ttyS0,115200 console=tty0 audit=0 selinux=0 Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007c4a1000 (usable) BIOS-e820: 000000007c4a1000 - 000000007c4a7000 (reserved) BIOS-e820: 000000007c4a7000 - 000000007c5b7000 (usable) BIOS-e820: 000000007c5b7000 - 000000007c60f000 (reserved) BIOS-e820: 000000007c60f000 - 000000007c6c6000 (usable) BIOS-e820: 000000007c6c6000 - 000000007c6d1000 (ACPI NVS) BIOS-e820: 000000007c6d1000 - 000000007c6d4000 (ACPI data) BIOS-e820: 000000007c6d4000 - 000000007c6d8000 (reserved) BIOS-e820: 000000007c6d8000 - 000000007c6dc000 (ACPI NVS) BIOS-e820: 000000007c6dc000 - 000000007c6df000 (reserved) BIOS-e820: 000000007c6df000 - 000000007c706000 (ACPI NVS) BIOS-e820: 000000007c706000 - 000000007c708000 (ACPI data) BIOS-e820: 000000007c708000 - 000000007c90f000 (reserved) BIOS-e820: 000000007c90f000 - 000000007c99f000 (ACPI NVS) BIOS-e820: 000000007c99f000 - 000000007c9ff000 (ACPI data) BIOS-e820: 000000007c9ff000 - 000000007ca00000 (usable) BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) NX (Execute Disable) protection: active DMI present. DMI: LENOVO 2241B48/2241B48, BIOS 6FET66WW (2.16 ) 04/22/2009 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x7ca00 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 07D000000 mask FFF000000 uncachable 1 base 07E000000 mask FFE000000 uncachable 2 base 000000000 mask F80000000 write-back 3 base 07CE00000 mask FFFE00000 uncachable 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 2000MB, range: 16MB, type UC reg 1, base: 2016MB, range: 32MB, type UC reg 2, base: 0GB, range: 2GB, type WB reg 3, base: 1998MB, range: 2MB, type UC total RAM covered: 1998M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 1998MB, range: 2MB, type UC reg 2, base: 2000MB, range: 16MB, type UC reg 3, base: 2016MB, range: 32MB, type UC found SMP MP-table at [ffff8800000f6570] f6570 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000099000] 99000 size 20480 init_memory_mapping: 0000000000000000-000000007ca00000 0000000000 - 007ca00000 page 2M kernel direct mapping tables up to 7ca00000 @ 1fffd000-20000000 RAMDISK: 36c9b000 - 37ff0000 Reserving 196MB of memory at 656MB for crashkernel (System RAM: 1994MB) ACPI: RSDP 00000000000f6530 00024 (v02 LENOVO) ACPI: XSDT 000000007c96a3f1 00094 (v01 LENOVO TP-6F 00002160 LTP 00000000) ACPI: FACP 000000007c96a500 000F4 (v03 LENOVO TP-6F 00002160 LNVO 00000001) ACPI: DSDT 000000007c96a8db 0F3FB (v01 LENOVO TP-6F 00002160 MSFT 03000000) ACPI: FACS 000000007c98e000 00040 ACPI: SSDT 000000007c96a6b4 00227 (v01 LENOVO TP-6F 00002160 MSFT 03000000) ACPI: ECDT 000000007c979cd6 00052 (v01 LENOVO TP-6F 00002160 LNVO 00000001) ACPI: APIC 000000007c979d28 00078 (v01 LENOVO TP-6F 00002160 LNVO 00000001) ACPI: MCFG 000000007c979da0 0003C (v01 LENOVO TP-6F 00002160 LNVO 00000001) ACPI: HPET 000000007c979ddc 00038 (v01 LENOVO TP-6F 00002160 LNVO 00000001) ACPI: BOOT 000000007c979f38 00028 (v01 LENOVO TP-6F 00002160 LTP 00000001) ACPI: ASF! 000000007c979f60 000A0 (v16 LENOVO TP-6F 00002160 PTL 00000001) ACPI: SSDT 000000007c98d213 0054F (v01 LENOVO TP-6F 00002160 INTL 20050513) ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000) ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000) ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: DMI detected: Lenovo ThinkPad T500 ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007ca00000 Initmem setup node 0 0000000000000000-000000007ca00000 NODE_DATA [000000007c69f000 - 000000007c6c5fff] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal empty Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009e 0: 0x00000100 -> 0x0007c4a1 0: 0x0007c4a7 -> 0x0007c5b7 0: 0x0007c60f -> 0x0007c6c6 0: 0x0007c9ff -> 0x0007ca00 On node 0 totalpages: 509431 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3921 pages, LIFO batch:0 DMA32 zone: 6923 pages used for memmap DMA32 zone: 498526 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000 PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000 PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000 PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000 PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000 PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000 PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000 PM: Registered nosave memory: 000000007c6df000 - 000000007c706000 PM: Registered nosave memory: 000000007c706000 - 000000007c708000 PM: Registered nosave memory: 000000007c708000 - 000000007c90f000 PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000 PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000 Allocating PCI resources starting at 7f000000 (gap: 7f000000:61000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 476 pages/cpu @ffff88007bc00000 s1919360 r8192 d22144 u2097152 pcpu-alloc: s1919360 r8192 d22144 u2097152 alloc=1*2097152 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Node order, mobility grouping on. Total pages: 502447 Policy zone: DMA32 Kernel command line: root=/dev/mapper/vg_dhcp2755-lv_root ro rd_LVM_LV=vg_dhcp2755/lv_root rd_LVM_LV=vg_dhcp2755/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=196M rhgb drm.debug=0x04 console=ttyS0,115200 console=tty0 audit=0 selinux=0 audit: disabled (until reboot) PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 1754192k/2041856k available (5401k kernel code, 4132k absent, 283532k reserved, 3548k data, 3452k init) Hierarchical RCU implementation. NR_IRQS:262400 nr_irqs:712 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6367 kB per task-struct memory footprint: 2688 bytes allocated 8388608 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 14 of 14 active objects replaced hpet clockevent registered Fast TSC calibration using PIT Detected 2793.117 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.23 BogoMIPS (lpj=2793117) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20120111 ftrace: allocating 20841 entries in 82 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz stepping 06 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. lockdep: fixing up alternatives. Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 99000 Disabled fast string operations NMI watchdog enabled, takes one hw-pmu counter. Brought up 2 CPUs Total of 2 processors activated (11172.46 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at 7c6c6000 (45056 bytes) PM: Registering ACPI NVS region at 7c6d8000 (16384 bytes) PM: Registering ACPI NVS region at 7c6df000 (159744 bytes) PM: Registering ACPI NVS region at 7c90f000 (589824 bytes) print_constraints: dummy: NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux) ACPI: EC: EC description table is found, configuring boot EC [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: SSDT 000000007c6d6aa0 0030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [PUBS] (on) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 3 docks/bays found PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780 pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.2: [8086:2a46] type 0 class 0x000101 pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700 pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] pci 0000:00:03.3: reg 14: [mem 0xfc024000-0xfc024fff] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:03:00.0: [8086:4237] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00 pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff] pci 0000:15:00.1: supports D1 D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: [1180:0822] type 0 class 0x000805 pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.3: [1180:0843] type 0 class 0x000880 pci 0000:15:00.3: reg 10: [mem 0xf4801c00-0xf4801cff] pci 0000:15:00.3: supports D1 D2 pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.4: [1180:0592] type 0 class 0x000880 pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff] pci 0000:15:00.4: supports D1 D2 pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.5: [1180:0852] type 0 class 0x000880 pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff] pci 0000:15:00.5: supports D1 D2 pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC control (0x1d) granted ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009ec00 - 000000000009ffff reserve RAM buffer: 000000007c4a1000 - 000000007fffffff reserve RAM buffer: 000000007c5b7000 - 000000007fffffff reserve RAM buffer: 000000007c6c6000 - 000000007fffffff reserve RAM buffer: 000000007ca00000 - 000000007fffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000c0000-0x000c3fff] pnp 00:00: [mem 0x000c4000-0x000c7fff] pnp 00:00: [mem 0x000c8000-0x000cbfff] pnp 00:00: [mem 0x000cc000-0x000cffff] pnp 00:00: [mem 0x000d0000-0x000d3fff] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] pnp 00:00: [mem 0x000dc000-0x000dffff] pnp 00:00: [mem 0x000e0000-0x000e3fff] pnp 00:00: [mem 0x000e4000-0x000e7fff] pnp 00:00: [mem 0x000e8000-0x000ebfff] pnp 00:00: [mem 0x000ec000-0x000effff] pnp 00:00: [mem 0x000f0000-0x000fffff] pnp 00:00: [mem 0x00100000-0x7effffff] pnp 00:00: [mem 0xfec00000-0xfed3ffff] pnp 00:00: [mem 0xfed4c000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved system 00:00: [mem 0x000cc000-0x000cffff] has been reserved system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0x7effffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0x000c0000-0x000c3fff window] pnp 00:01: [mem 0x000c4000-0x000c7fff window] pnp 00:01: [mem 0x000c8000-0x000cbfff window] pnp 00:01: [mem 0x000cc000-0x000cffff window] pnp 00:01: [mem 0x000d0000-0x000d3fff window] pnp 00:01: [mem 0x000d4000-0x000d7fff window] pnp 00:01: [mem 0x000d8000-0x000dbfff window] pnp 00:01: [mem 0x000dc000-0x000dffff window] pnp 00:01: [mem 0x000e0000-0x000e3fff window] pnp 00:01: [mem 0x000e4000-0x000e7fff window] pnp 00:01: [mem 0x000e8000-0x000ebfff window] pnp 00:01: [mem 0x000ec000-0x000effff window] pnp 00:01: [mem 0x7f000000-0xfebfffff window] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: [io 0x0010-0x001f] pnp 00:02: [io 0x0090-0x009f] pnp 00:02: [io 0x0024-0x0025] pnp 00:02: [io 0x0028-0x0029] pnp 00:02: [io 0x002c-0x002d] pnp 00:02: [io 0x0030-0x0031] pnp 00:02: [io 0x0034-0x0035] pnp 00:02: [io 0x0038-0x0039] pnp 00:02: [io 0x003c-0x003d] pnp 00:02: [io 0x00a4-0x00a5] pnp 00:02: [io 0x00a8-0x00a9] pnp 00:02: [io 0x00ac-0x00ad] pnp 00:02: [io 0x00b0-0x00b5] pnp 00:02: [io 0x00b8-0x00b9] pnp 00:02: [io 0x00bc-0x00bd] pnp 00:02: [io 0x0050-0x0053] pnp 00:02: [io 0x0072-0x0077] pnp 00:02: [io 0x002e-0x002f] pnp 00:02: [io 0x1000-0x107f] pnp 00:02: [io 0x1180-0x11ff] pnp 00:02: [io 0x0800-0x080f] pnp 00:02: [io 0x15e0-0x15ef] pnp 00:02: [io 0x1600-0x167f] pnp 00:02: [io 0x1680-0x169f] pnp 00:02: [mem 0xe0000000-0xefffffff] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] pnp 00:02: [mem 0xfed10000-0xfed13fff] pnp 00:02: [mem 0xfed18000-0xfed18fff] pnp 00:02: [mem 0xfed19000-0xfed19fff] pnp 00:02: [mem 0xfed45000-0xfed4bfff] system 00:02: [io 0x1000-0x107f] has been reserved system 00:02: [io 0x1180-0x11ff] has been reserved system 00:02: [io 0x0800-0x080f] has been reserved system 00:02: [io 0x15e0-0x15ef] has been reserved system 00:02: [io 0x1600-0x167f] has been reserved system 00:02: [io 0x1680-0x169f] has been reserved system 00:02: [mem 0xe0000000-0xefffffff] has been reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0] pnp 00:06: [irq 13] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x0070-0x0071] pnp 00:07: [irq 8] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] pnp 00:08: [irq 1] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: [irq 12] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) pnp 00:0a: [mem 0xfed40000-0xfed44fff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f000000-0x7f1fffff 64bit pref] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f200000-0x7f3fffff] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff] pci 0000:00:1c.0: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] pci 0000:00:1c.1: bridge window [mem 0x7f000000-0x7f1fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] pci 0000:15:00.0: BAR 16: assigned [mem 0x80000000-0x83ffffff] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref] pci 0000:15:00.0: BAR 14: assigned [io 0x4000-0x40ff] pci 0000:15:00.0: BAR 13: assigned [io 0x4400-0x44ff] pci 0000:15:00.0: CardBus bridge to [bus 16-17] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] pci 0000:15:00.0: bridge window [mem 0x80000000-0x83ffffff] pci 0000:00:1e.0: PCI bridge to [bus 15-18] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] pci_bus 0000:02: resource 1 [mem 0x7f200000-0x7f3fffff] pci_bus 0000:02: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff] pci_bus 0000:03: resource 2 [mem 0x7f000000-0x7f1fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] pci_bus 0000:15: resource 9 [mem 0x7f000000-0xfebfffff] pci_bus 0000:16: resource 0 [io 0x4400-0x44ff] pci_bus 0000:16: resource 1 [io 0x4000-0x40ff] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] pci_bus 0000:16: resource 3 [mem 0x80000000-0x83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 5, 196608 bytes) UDP-Lite hash table entries: 1024 (order: 5, 196608 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 19796k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config Simple Boot Flag at 0x35 set to 0x1 HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3464 cryptomgr_test used greatest stack depth: 6536 bytes left cryptomgr_test used greatest stack depth: 6344 bytes left Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) start plist test end plist test pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt pci 0000:03:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 17aa ss_did 20f3 pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x3122220 intel_idle: does not run on family 6 model 23 ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: AC Adapter [AC] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (63 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (67 C) GHES: HEST is not enabled! Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel GM45 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6) tpm_tis 00:0a: Intel iTPM workaround enabled tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value tpm_tis 00:0a: TPM is disabled/deactivated (0x6) brd: module loaded loop: module loaded Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.3.0-rc4-wl+ ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 3.3.0-rc4-wl+ ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 3.3.0-rc4-wl+ uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value IMA: No TPM chip found, activating TPM-bypass! rtc_cmos 00:07: setting system clock to 2012-02-23 10:30:44 UTC (1329993044) Initializing network drop monitor service usb 1-6: new high-speed USB device number 2 using ehci_hcd usb 1-6: New USB device found, idVendor=17ef, idProduct=4807 usb 1-6: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared ACPI: Battery Slot [BAT0] (battery present) Freeing unused kernel memory: 3452k freed mknod used greatest stack depth: 5408 bytes left mount used greatest stack depth: 5232 bytes left dracut: dracut-004-252.el6 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com modprobe used greatest stack depth: 5056 bytes left psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000 udev: starting version 147 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 udevd (78): /proc/78/oom_adj is deprecated, please use /proc/78/oom_score_adj instead. input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 44 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm:init_vbt_defaults], Set default to SSC at 100MHz [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline], Modeline 0:"1680x1050" 0 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x8 0xa [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [drm:intel_dsm_pci_probe], no _DSM method for intel device [drm:intel_modeset_init], 2 display pipes available. [drm:intel_modeset_init], plane 0 init failed: -19 [drm:intel_modeset_init], plane 1 init failed: -19 vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_setup_outputs], probing SDVOB [drm:intel_sdvo_read_byte], i2c transfer returned -6 [drm:intel_sdvo_init], No SDVO device found on SDVOB [drm:intel_setup_outputs], probing HDMI on SDVOB [drm:intel_setup_outputs], probing DP_B [drm:intel_dp_i2c_init], i2c_init DPDDC-B [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_setup_outputs], probing SDVOC [drm:intel_sdvo_read_byte], i2c transfer returned -6 [drm:intel_sdvo_init], No SDVO device found on SDVOC [drm:intel_setup_outputs], probing HDMI on SDVOC [drm:intel_setup_outputs], probing DP_C [drm:intel_dp_i2c_init], i2c_init DPDDC-C [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_setup_outputs], probing DP_D [drm:intel_dp_i2c_init], i2c_init DPDDC-D [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [drm:intel_tv_init], Integrated TV is not present. [drm:i915_get_vblank_timestamp], crtc 0 is disabled [drm:intel_update_fbc], [drm:intel_update_fbc], no output, disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [drm:i915_get_vblank_timestamp], crtc 1 is disabled [drm:intel_update_fbc], [drm:intel_update_fbc], no output, disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000 [drm:i915_setup_compression], FBC base 0x7d000000, ll base 0x00000000, size 28M [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_setup_crtcs], [drm:drm_enable_connectors], connector 5 enabled? yes [drm:drm_enable_connectors], connector 12 enabled? no [drm:drm_enable_connectors], connector 15 enabled? no [drm:drm_enable_connectors], connector 18 enabled? no [drm:drm_enable_connectors], connector 21 enabled? no [drm:drm_enable_connectors], connector 22 enabled? no [drm:drm_enable_connectors], connector 24 enabled? no [drm:drm_target_preferred], looking for cmdline mode on connector 5 [drm:drm_target_preferred], looking for preferred mode on connector 5 [drm:drm_target_preferred], found mode 1680x1050 [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [drm:drm_setup_crtcs], desired mode 1680x1050 set on crtc 4 [drm:intelfb_create], allocated 1680x1050 fb: 0x00042000, bo ffff880037f788f8 fbcon: inteldrmfb (fb0) is primary device [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [drm:drm_crtc_helper_set_config], modes are different, full mode set [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_crtc_helper_set_mode], [CRTC:4] [drm:i9xx_crtc_mode_set], using SSC reference clock of 100 MHz [drm:i9xx_crtc_mode_set], Mode for pipe B: [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1680x1050] [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:intel_lvds_enable], applying panel-fitter: 0, 0 [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] Console: switching to colour frame buffer device 210x65 [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] fb0: inteldrmfb frame buffer device drm: registered panic notifier acpi device:02: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 modprobe used greatest stack depth: 2784 bytes left dracut: Starting plymouth daemon [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] ata_generic 0000:00:03.2: setting latency timer to 64 scsi0 : ata_generic scsi1 : ata_generic ata1: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 ata2: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: irq 45 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs ahci 0000:00:1f.2: setting latency timer to 64 scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata3: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 45 ata4: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 45 ata5: DUMMY ata6: DUMMY ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ATA-8: FUJITSU MHZ2160BJ G1, 00840022, max UDMA/100 ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0084 PQ: 0 ANSI: 5 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133 ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: configured for UDMA/133 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5 yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21) sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: no vmmc regulator found sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. Registered led device: mmc0:: sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA sdhci-pci 0000:15:00.3: SDHCI controller found [1180:0843] (rev 11) mmc1: no vmmc regulator found Registered led device: mmc1:: mmc1: SDHCI controller on PCI [0000:15:00.3] using DMA sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sda: sda1 sda2 sd 2:0:0:0: [sda] Attached SCSI disk sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. firewire_core: created device fw0: GUID 00061b032a3cb74a, S400 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 dracut: Scanning devices sda2 for LVM logical volumes vg_dhcp2755/lv_root vg_dhcp2755/lv_swap dracut: inactive '/dev/vg_dhcp2755/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/vg_dhcp2755/lv_home' [94.75 GiB] inherit dracut: inactive '/dev/vg_dhcp2755/lv_swap' [3.81 GiB] inherit EXT4-fs (dm-0): INFO: recovery required on readonly filesystem EXT4-fs (dm-0): write access will be enabled during recovery EXT4-fs (dm-0): orphan cleanup on readonly fs EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232069 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232068 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232067 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232066 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232065 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232064 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232062 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232052 EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 2232037 EXT4-fs (dm-0): 9 orphan inodes deleted EXT4-fs (dm-0): recovery complete EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) dracut: Mounted root filesystem /dev/mapper/vg_dhcp2755-lv_root dracut: Switching root udev: starting version 147 WARNING! power/level is deprecated; use power/control instead [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 46 for MSI/MSI-X e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:24:7e:16:ad:58 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X hda_codec: CX20561 (Hermosa): BIOS auto-probing. ALSA sound/pci/hda/hda_codec.c:4923 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker ALSA sound/pci/hda/hda_codec.c:4927 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4931 hp_outs=2 (0x19/0x16/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4932 mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4936 inputs: ALSA sound/pci/hda/hda_codec.c:4940 Dock Mic=0x17 ALSA sound/pci/hda/hda_codec.c:4940 Mic=0x18 ALSA sound/pci/hda/hda_codec.c:4940 Internal Mic=0x1d ALSA sound/pci/hda/hda_codec.c:4942 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 cfg80211: Calling CRDA to update world regulatory domain Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d Copyright(c) 2003-2012 Intel Corporation iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 iwlwifi 0000:03:00.0: pci_resource_base = ffffc90004e04000 iwlwifi 0000:03:00.0: HW Revision ID = 0x0 iwlwifi 0000:03:00.0: irq 48 for MSI/MSI-X iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4 iwlwifi 0000:03:00.0: Device SKU: 0xF0 iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 Registered led device: phy0-led iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' input: PC Speaker as /devices/platform/pcspkr/input/input11 microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c microcode: Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device (17ef:4807) input: UVC Camera (17ef:4807) as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 3:0:0:0: Attached scsi generic sg1 type 5 wmi: Mapper loaded thinkpad_acpi: ThinkPad ACPI Extras v0.24 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 6FET66WW (2.16 ), EC 7VHT12WW-1.01 thinkpad_acpi: Lenovo ThinkPad T500, model 2241B48 thinkpad_acpi: detected a 8-level brightness capable ThinkPad thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: Standard ACPI backlight interface available, not loading native one thinkpad_acpi: Console audio control enabled, mode: monitor (read only) input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13 r592: driver successfully loaded cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff usb 4-2: new full-speed USB device number 2 using uhci_hcd usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb EXT4-fs (dm-0): re-mounted. Opts: (null) EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) Adding 3997692k swap on /dev/mapper/vg_dhcp2755-lv_swap. Priority:-1 extents:1 across:3997692k NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team e1000e 0000:00:19.0: irq 46 for MSI/MSI-X e1000e 0000:00:19.0: irq 46 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 ADDRCONF(NETDEV_UP): wlan0: link is not ready RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_addfb], [FB:28] [drm:drm_mode_setcrtc], [CRTC:4] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:28] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 006FD000 00000000 0 0 7168 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:intel_crtc_cursor_set], [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected fuse init (API version 7.18) [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. wlan0: authenticate with 54:e6:fc:98:63:fe wlan0: send auth to 54:e6:fc:98:63:fe (try 1/3) wlan0: send auth to 54:e6:fc:98:63:fe (try 2/3) wlan0: authenticated wlan0: associate with 54:e6:fc:98:63:fe (try 1/3) wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Intel AES-NI instructions are not detected. [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 wlan0: no IPv6 routers present [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off usb 4-2: USB disconnect, device number 2 wlan0: deauthenticating from 54:e6:fc:98:63:fe by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 315136 pages) PM: Allocated 1260544 kbytes in 3.37 seconds (374.04 MB/s) Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY ACPI handle has no context! e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! sd 2:0:0:0: [sda] Synchronizing SCSI cache PM: freeze of devices complete after 237.282 msecs PM: late freeze of devices complete after 1.466 msecs Disabling non-boot CPUs ... Broke affinity for irq 9 Broke affinity for irq 12 Broke affinity for irq 21 Broke affinity for irq 23 CPU 1 is now offline lockdep: fixing up alternatives. Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 180084 pages Extended CMOS year: 2000 microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 Enabling non-boot CPUs ... lockdep: fixing up alternatives. Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 99000 Disabled fast string operations Calibrating delay loop (skipped) already calibrated this CPU NMI watchdog enabled, takes one hw-pmu counter. microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 CPU1 is up uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 PM: early restore of devices complete after 24.733 msecs i915 0000:00:02.0: setting latency timer to 64 ata_generic 0000:00:03.2: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: irq 46 for MSI/MSI-X uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1a.7: setting latency timer to 64 usb usb1: root hub lost power or was reset ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb8: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb2: root hub lost power or was reset ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000 [drm:drm_crtc_helper_set_mode], [CRTC:4] dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 PM: Device 00:0a failed to restore: error -19 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:i9xx_crtc_mode_set], using SSC reference clock of 100 MHz [drm:i9xx_crtc_mode_set], Mode for pipe B: [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:i9xx_crtc_mode_set], disabling CxSR downclocking firewire_core: skipped bus generations, destroying all nodes [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1680x1050] [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: configured for UDMA/100 sd 2:0:0:0: [sda] Starting disk ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: configured for UDMA/133 usb 1-6: reset high-speed USB device number 2 using ehci_hcd firewire_core: rediscovered device fw0 PM: restore of devices complete after 670.351 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [drm:drm_mode_setcrtc], [CRTC:4] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:28] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 006FD000 00000000 0 0 7168 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected e1000e 0000:00:19.0: irq 46 for MSI/MSI-X e1000e 0000:00:19.0: irq 46 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 ADDRCONF(NETDEV_UP): wlan0: link is not ready usb 4-2: new full-speed USB device number 3 using uhci_hcd usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 wlan0: authenticate with 54:e6:fc:98:63:fe wlan0: send auth to 54:e6:fc:98:63:fe (try 1/3) wlan0: send auth to 54:e6:fc:98:63:fe (try 2/3) wlan0: authenticated wlan0: associate with 54:e6:fc:98:63:fe (try 1/3) wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x31 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present usb 4-2: USB disconnect, device number 3 wlan0: deauthenticating from 54:e6:fc:98:63:fe by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.03 seconds) done. PM: Preallocating image memory... done (allocated 315118 pages) PM: Allocated 1260472 kbytes in 3.95 seconds (319.10 MB/s) Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY ACPI handle has no context! e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! sd 2:0:0:0: [sda] Synchronizing SCSI cache PM: freeze of devices complete after 201.946 msecs PM: late freeze of devices complete after 1.700 msecs Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 179648 pages Extended CMOS year: 2000 microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 Enabling non-boot CPUs ... lockdep: fixing up alternatives. Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 99000 Disabled fast string operations Calibrating delay loop (skipped) already calibrated this CPU NMI watchdog enabled, takes one hw-pmu counter. microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 CPU1 is up uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 PM: early restore of devices complete after 23.901 msecs i915 0000:00:02.0: setting latency timer to 64 ata_generic 0000:00:03.2: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: irq 46 for MSI/MSI-X uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1a.7: setting latency timer to 64 usb usb1: root hub lost power or was reset ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb8: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb2: root hub lost power or was reset ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 PM: Device 00:0a failed to restore: error -19 [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000 [drm:drm_crtc_helper_set_mode], [CRTC:4] firewire_core: skipped bus generations, destroying all nodes [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:i9xx_crtc_mode_set], using SSC reference clock of 100 MHz [drm:i9xx_crtc_mode_set], Mode for pipe B: [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1680x1050] [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: configured for UDMA/100 sd 2:0:0:0: [sda] Starting disk ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: configured for UDMA/133 usb 1-6: reset high-speed USB device number 2 using ehci_hcd firewire_core: rediscovered device fw0 PM: restore of devices complete after 662.503 msecs psmouse serio1: synaptics: device claims to have max coordinates query, but I'm not able to read it. Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [drm:drm_mode_setcrtc], [CRTC:4] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:28] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 006FD000 00000000 0 0 7168 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected e1000e 0000:00:19.0: irq 46 for MSI/MSI-X e1000e 0000:00:19.0: irq 46 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 ADDRCONF(NETDEV_UP): wlan0: link is not ready usb 4-2: new full-speed USB device number 4 using uhci_hcd usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp wlan0: authenticate with 54:e6:fc:98:63:fe wlan0: send auth to 54:e6:fc:98:63:fe (try 1/3) wlan0: authenticated wlan0: associate with 54:e6:fc:98:63:fe (try 1/3) wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 wlan0: no IPv6 routers present Slab corruption (Not tainted): dentry start=ffff8800715b28d0, len=264 Redzone: 0x9f911029d74e35b/0xaaaaaa00aaaaaa. Last user: [](__d_free+0x52/0x70) 0f0: aa aa aa 00 aa aa aa 00 aa aa aa 00 aa aa aa 00 ................ 100: aa aa aa 00 aa aa aa 00 ........ Prev obj: start=ffff8800715b27b0, len=264 Redzone: 0xd84156c5635688c0/0xd84156c5635688c0. Last user: [](__d_alloc+0x37/0x1a0) 000: c0 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 010: c0 76 1e 00 00 c9 ff ff 30 23 8a 76 00 88 ff ff .v......0#.v.... Next obj: start=ffff8800715b29f0, len=264 Redzone: 0xd84156c5635688c0/0xd84156c5635688c0. Last user: [](__d_alloc+0x37/0x1a0) 000: 8c 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 010: f8 01 1c 00 00 c9 ff ff 30 5c 5b 71 00 88 ff ff ........0\[q.... slab error in cache_alloc_debugcheck_after(): cache `dentry': double free, or memory outside object was overwritten Pid: 4369, comm: rhsmd Not tainted 3.3.0-rc4-wl+ #1 Call Trace: [] __slab_error+0x26/0x30 [] cache_alloc_debugcheck_after+0x75/0x230 [] ? __d_alloc+0x37/0x1a0 [] kmem_cache_alloc+0x149/0x260 [] __d_alloc+0x37/0x1a0 [] d_alloc+0x28/0x80 [] d_alloc_and_lookup+0x2d/0x90 [] ? d_lookup+0x35/0x60 [] do_lookup+0x28a/0x3b0 [] ? inode_permission+0x4c/0x110 [] do_last+0xe1/0x830 [] path_openat+0xd9/0x3e0 [] ? sched_clock_cpu+0xb8/0x110 [] ? trace_hardirqs_off+0xd/0x10 [] ? local_clock+0x6f/0x80 [] do_filp_open+0x49/0xa0 [] ? _raw_spin_unlock+0x2b/0x40 [] ? alloc_fd+0xab/0x160 [] do_sys_open+0x108/0x1e0 [] sys_open+0x21/0x30 [] system_call_fastpath+0x16/0x1b ffff8800715b28c8: redzone 1:0x9f911029d74e35b, redzone 2:0xaaaaaa00aaaaaa EXT4-fs (dm-0): error count: 29 EXT4-fs (dm-0): initial error at 1324291853: ext4_mb_generate_buddy:739 EXT4-fs (dm-0): last error at 1328623521: ext4_new_inode:941: block 2277397 usb 4-2: USB disconnect, device number 4 wlan0: deauthenticating from 54:e6:fc:98:63:fe by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: Calling CRDA for country: CZ cfg80211: Regulatory domain changed to country: CZ cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2301 mBm) cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:9] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. PM: Preallocating image memory... done (allocated 315128 pages) PM: Allocated 1260512 kbytes in 6.49 seconds (194.22 MB/s) Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 2:0:0:0: [sda] Synchronizing SCSI cache pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY e1000e 0000:00:19.0: wake-up capability enabled by ACPI ACPI handle has no context! ACPI handle has no context! PM: freeze of devices complete after 173.327 msecs PM: late freeze of devices complete after 1.700 msecs Disabling non-boot CPUs ... CPU 1 is now offline lockdep: fixing up alternatives. Extended CMOS year: 2000 PM: Creating hibernation image: PM: Need to copy 179791 pages Extended CMOS year: 2000 microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 Enabling non-boot CPUs ... lockdep: fixing up alternatives. Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 99000 Disabled fast string operations Calibrating delay loop (skipped) already calibrated this CPU NMI watchdog enabled, takes one hw-pmu counter. microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 CPU1 is up uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 PM: early restore of devices complete after 24.743 msecs i915 0000:00:02.0: setting latency timer to 64 ata_generic 0000:00:03.2: setting latency timer to 64 e1000e 0000:00:19.0: wake-up capability disabled by ACPI e1000e 0000:00:19.0: irq 46 for MSI/MSI-X uhci_hcd 0000:00:1a.0: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1a.1: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1a.2: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1a.7: setting latency timer to 64 usb usb1: root hub lost power or was reset ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb6: root hub lost power or was reset uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb7: root hub lost power or was reset uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb8: root hub lost power or was reset ehci_hcd 0000:00:1d.7: setting latency timer to 64 usb usb2: root hub lost power or was reset ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported pci 0000:00:1e.0: setting latency timer to 64 ahci 0000:00:1f.2: setting latency timer to 64 dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19 PM: Device 00:0a failed to restore: error -19 [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000 [drm:drm_crtc_helper_set_mode], [CRTC:4] Extended CMOS year: 2000 firewire_core: skipped bus generations, destroying all nodes [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:i9xx_crtc_mode_set], using SSC reference clock of 100 MHz [drm:i9xx_crtc_mode_set], Mode for pipe B: [drm:drm_mode_debug_printmodeline], Modeline 8:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 6720 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1680x1050] [drm:g4x_check_srwm], SR watermark: display plane 94, cursor 6 [drm:g4x_check_srwm], display watermark is too large(94/63), disabling [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=41, cursor=6, SR: plane=94, cursor=6 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata3.00: configured for UDMA/100 sd 2:0:0:0: [sda] Starting disk ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded ata4.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded ata4.00: configured for UDMA/133 usb 1-6: reset high-speed USB device number 2 using ehci_hcd firewire_core: rediscovered device fw0 PM: restore of devices complete after 661.493 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [drm:drm_mode_setcrtc], [CRTC:4] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [drm:drm_crtc_helper_set_config], [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:28] #connectors=1 (x y) (0 0) [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:i9xx_update_plane], Writing base 006FD000 00000000 0 0 7168 [drm:intel_update_fbc], [drm:intel_update_fbc], fbc set to per-chip default [drm:intel_update_fbc], fbc disabled per module param [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 122000 1680 1712 1776 1904 1050 1051 1054 1066 0x48 0xa [drm:drm_mode_debug_printmodeline], Modeline 27:"1680x1050" 50 101670 1680 1712 1776 1904 1050 1051 1054 1066 0x40 0xa [drm:drm_mode_getconnector], [CONNECTOR:5:?] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:12:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [drm:intel_crt_detect], CRT not detected via hotplug [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:15:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:18:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:21:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:22:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:drm_mode_getconnector], [CONNECTOR:24:?] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [drm:intel_crt_detect], CRT not detected via hotplug [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [drm:intel_dp_detect], DPCD: 0000000000000000 [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 e1000e 0000:00:19.0: irq 46 for MSI/MSI-X e1000e 0000:00:19.0: irq 46 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 ADDRCONF(NETDEV_UP): wlan0: link is not ready usb 4-2: new full-speed USB device number 5 using uhci_hcd usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp wlan0: authenticate with 54:e6:fc:98:63:fe wlan0: send auth to 54:e6:fc:98:63:fe (try 1/3) wlan0: send auth to 54:e6:fc:98:63:fe (try 2/3) wlan0: authenticated wlan0: associate with 54:e6:fc:98:63:fe (try 1/3) wlan0: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: no IPv6 routers present [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], [drm:intel_crtc_cursor_set], cursor off