[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <963d5aaac84ad075c4cfbd2babc5d264e2157502.1330315545.git.viresh.kumar@st.com>
Date: Mon, 27 Feb 2012 09:41:39 +0530
From: Viresh Kumar <viresh.kumar@...com>
To: <akpm@...ux-foundation.org>, <rui.zhang@...el.com>
Cc: <armando.visconti@...com>, <shiraz.hashim@...com>,
<vipin.kumar@...com>, <rajeev-dlh.kumar@...com>,
<deepak.sikri@...com>, <vipulkumar.samar@...com>,
<amit.virdi@...com>, <viresh.kumar@...com>,
<pratyush.anand@...com>, <bhupesh.sharma@...com>,
<viresh.linux@...il.com>, <bhavna.yadav@...com>,
<vincenzo.frascino@...com>, <mirko.gardi@...com>,
<salvatore.dedominicis@...com>, <linux-kernel@...r.kernel.org>,
<len.brown@...el.com>
Subject: [PATCH 1/2] thermal/spear_thermal: Replace readl/writel with lighter _relaxed variants
readl/writel versions for ARM contain memory barrier instruction for
synchronizing DMA buffers. These are not required atleast on this module. So use
lighter _relaxed variants.
Signed-off-by: Viresh Kumar <viresh.kumar@...com>
---
Hi Andrew,
These patches are rebased over all three patches you have applied on your tree.
drivers/thermal/spear_thermal.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index 880bf28..be94413 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -46,7 +46,7 @@ static inline int thermal_get_temp(struct thermal_zone_device *thermal,
* Data are ready to be read after 628 usec from POWERDOWN signal
* (PDN) = 1
*/
- *temp = (readl(stdev->thermal_base) & 0x7F) * MD_FACTOR;
+ *temp = (readl_relaxed(stdev->thermal_base) & 0x7F) * MD_FACTOR;
return 0;
}
@@ -63,8 +63,8 @@ static int spear_thermal_suspend(struct device *dev)
unsigned int actual_mask = 0;
/* Disable SPEAr Thermal Sensor */
- actual_mask = readl(stdev->thermal_base);
- writel(actual_mask & ~stdev->flags, stdev->thermal_base);
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
clk_disable(stdev->clk);
dev_info(dev, "Suspended.\n");
@@ -87,8 +87,8 @@ static int spear_thermal_resume(struct device *dev)
}
/* Enable SPEAr Thermal Sensor */
- actual_mask = readl(stdev->thermal_base);
- writel(actual_mask | stdev->flags, stdev->thermal_base);
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask | stdev->flags, stdev->thermal_base);
dev_info(dev, "Resumed.\n");
@@ -145,7 +145,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
}
stdev->flags = pdata->thermal_flags;
- writel(stdev->flags, stdev->thermal_base);
+ writel_relaxed(stdev->flags, stdev->thermal_base);
spear_thermal = thermal_zone_device_register("spear_thermal", 0,
stdev, &ops, 0, 0, 0, 0);
@@ -180,8 +180,8 @@ static int spear_thermal_exit(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
/* Disable SPEAr Thermal Sensor */
- actual_mask = readl(stdev->thermal_base);
- writel(actual_mask & ~stdev->flags, stdev->thermal_base);
+ actual_mask = readl_relaxed(stdev->thermal_base);
+ writel_relaxed(actual_mask & ~stdev->flags, stdev->thermal_base);
clk_disable(stdev->clk);
clk_put(stdev->clk);
--
1.7.8.110.g4cb5d
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists