| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1330386909-17723-2-git-send-email-swarren@nvidia.com>
Date: Mon, 27 Feb 2012 16:55:09 -0700
From: Stephen Warren <swarren@...dia.com>
To: Linus Walleij <linus.walleij@...ricsson.com>
CC: Linus Walleij <linus.walleij@...aro.org>, <B29396@...escale.com>,
<s.hauer@...gutronix.de>, <dongas86@...il.com>,
<shawn.guo@...aro.org>, <thomas.abraham@...aro.org>,
<tony@...mide.com>, <linux-kernel@...r.kernel.org>,
Stephen Warren <swarren@...dia.com>
Subject: [PATCH V2 2/2] pinctrl: Assume map table entries can't have a NULL name field
pinctrl_register_mappings() already requires that every mapping table
entry have a non-NULL name field.
Logically, this makes sense too; drivers should always request a specific
named state so they know what they're getting. Relying on getting the
first mentioned state in the mapping table is error-prone, and a nasty
special case to implement, given that a given the mapping table may define
multiple states for a device.
Remove a small part of the documentation that talked about optionally
requesting a specific state; it's mandatory now.
Signed-off-by: Stephen Warren <swarren@...dia.com>
---
v2: Update mach-u300/core.c and sirfsoc_uart.c not to request NULL state
names. Use PINCTRL_STATE_DEFAULT from previous patch.
This is now conceptually ack'd by Dong Aisheng, although I didn't actually
include the ack above since I've reworked the patch a little since I last
posted it (per the v2 changelog above).
---
Documentation/pinctrl.txt | 7 +++----
arch/arm/mach-u300/core.c | 8 ++++----
drivers/pinctrl/core.c | 17 +++++------------
drivers/tty/serial/sirfsoc_uart.c | 2 +-
4 files changed, 13 insertions(+), 21 deletions(-)
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 6fe3232..558aac5 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -782,16 +782,19 @@ spi on the second function mapping:
static const struct pinctrl_map __initdata mapping[] = {
{
.dev_name = "foo-spi.0",
+ .name = PINCTRL_STATE_DEFAULT,
.ctrl_dev_name = "pinctrl-foo",
.function = "spi0",
},
{
.dev_name = "foo-i2c.0",
+ .name = PINCTRL_STATE_DEFAULT,
.ctrl_dev_name = "pinctrl-foo",
.function = "i2c0",
},
{
.dev_name = "foo-mmc.0",
+ .name = PINCTRL_STATE_DEFAULT,
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
},
@@ -944,10 +947,6 @@ foo_remove()
pinctrl_put(state->p);
}
-If you want to grab a specific control mapping and not just the first one
-found for this device you can specify a specific mapping name, for example in
-the above example the second i2c0 setting: pinctrl_get(&device, "spi0-pos-B");
-
This get/enable/disable/put sequence can just as well be handled by bus drivers
if you don't want each and every driver to handle it and you know the
arrangement on your bus.
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index c9050dd..5b37d84 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1573,9 +1573,9 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
PIN_MAP_SYS_HOG("pinctrl-u300", "emif0"),
PIN_MAP_SYS_HOG("pinctrl-u300", "emif1"),
/* per-device maps for MMC/SD, SPI and UART */
- PIN_MAP("MMCSD", "pinctrl-u300", "mmc0", "mmci"),
- PIN_MAP("SPI", "pinctrl-u300", "spi0", "pl022"),
- PIN_MAP("UART0", "pinctrl-u300", "uart0", "uart0"),
+ PIN_MAP(PINCTRL_STATE_DEFAULT, "pinctrl-u300", "mmc0", "mmci"),
+ PIN_MAP(PINCTRL_STATE_DEFAULT, "pinctrl-u300", "spi0", "pl022"),
+ PIN_MAP(PINCTRL_STATE_DEFAULT, "pinctrl-u300", "uart0", "uart0"),
};
struct u300_mux_hog {
@@ -1607,7 +1607,7 @@ static int __init u300_pinctrl_fetch(void)
struct pinctrl *p;
int ret;
- p = pinctrl_get(u300_mux_hogs[i].dev, NULL);
+ p = pinctrl_get(u300_mux_hogs[i].dev, PINCTRL_STATE_DEFAULT);
if (IS_ERR(p)) {
pr_err("u300: could not get pinmux hog %s\n",
u300_mux_hogs[i].name);
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index f25307b..6af6d8d 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -461,8 +461,8 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev, const char *name)
int i;
struct pinctrl_map const *map;
- /* We must have a dev name */
- if (WARN_ON(!dev))
+ /* We must have both a dev and state name */
+ if (WARN_ON(!dev || !name))
return ERR_PTR(-EINVAL);
devname = dev_name(dev);
@@ -504,16 +504,9 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev, const char *name)
if (strcmp(map->dev_name, devname))
continue;
- /*
- * If we're looking for a specific named map, this must match,
- * else we loop and look for the next.
- */
- if (name != NULL) {
- if (map->name == NULL)
- continue;
- if (strcmp(map->name, name))
- continue;
- }
+ /* State name must be the one we're looking for */
+ if (strcmp(map->name, name))
+ continue;
ret = pinmux_apply_muxmap(pctldev, p, dev, devname, map);
if (ret) {
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index c1a871e..3cabb65 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -673,7 +673,7 @@ int sirfsoc_uart_probe(struct platform_device *pdev)
port->irq = res->start;
if (sirfport->hw_flow_ctrl) {
- sirfport->p = pinctrl_get(&pdev->dev, NULL);
+ sirfport->p = pinctrl_get(&pdev->dev, PINCTRL_STATE_DEFAULT);
ret = IS_ERR(sirfport->p);
if (ret)
goto pin_err;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists