Message-Id: <1330545489-31169-4-git-send-email-eric.andersson@unixphere.com>
Date:	Wed, 29 Feb 2012 20:58:09 +0100
From:	Eric Andersson <eric.andersson@...xphere.com>
To:	linux-kernel@...r.kernel.org
Cc:	arnd@...db.de, gregkh@...uxfoundation.org,
	christoph.mair@...il.com, stefan.nilsson@...xphere.com,
	zhengguang.guo@...ch-sensortec.com, peter.moeller@...bosch.com,
	Eric Andersson <eric.andersson@...xphere.com>
Subject: [PATCH 3/3] drivers/misc: remove bmp085 driver

Removed the bmp085 driver since it is obsoleted by the bmp18x driver.

Signed-off-by: Eric Andersson <eric.andersson@...xphere.com>
---
 Documentation/ABI/testing/sysfs-i2c-bmp085 |   31 --
 drivers/misc/Kconfig                       |   10 -
 drivers/misc/Makefile                      |    1 -
 drivers/misc/bmp085.c                      |  483 ----------------------------
 4 files changed, 0 insertions(+), 525 deletions(-)
 delete mode 100644 Documentation/ABI/testing/sysfs-i2c-bmp085
 delete mode 100644 drivers/misc/bmp085.c

diff --git a/Documentation/ABI/testing/sysfs-i2c-bmp085 b/Documentation/ABI/testing/sysfs-i2c-bmp085
deleted file mode 100644
index 585962a..0000000
--- a/Documentation/ABI/testing/sysfs-i2c-bmp085
+++ /dev/null
@@ -1,31 +0,0 @@
-What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/pressure0_input
-Date:		June 2010
-Contact:	Christoph Mair <christoph.mair@...il.com>
-Description:	Start a pressure measurement and read the result. Values
-		represent the ambient air pressure in pascal (0.01 millibar).
-
-		Reading: returns the current air pressure.
-
-
-What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/temp0_input
-Date:		June 2010
-Contact:	Christoph Mair <christoph.mair@...il.com>
-Description:	Measure the ambient temperature. The returned value represents
-		the ambient temperature in units of 0.1 degree celsius.
-
-		Reading: returns the current temperature.
-
-
-What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/oversampling
-Date:		June 2010
-Contact:	Christoph Mair <christoph.mair@...il.com>
-Description:	Tell the bmp085 to use more samples to calculate a pressure
-		value. When writing to this file the chip will use 2^x samples
-		to calculate the next pressure value with x being the value
-		written. Using this feature will decrease RMS noise and
-		increase the measurement time.
-
-		Reading: returns the current oversampling setting.
-
-		Writing: sets a new oversampling setting.
-		Accepted values: 0..3.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 2e894fd..601094f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -451,16 +451,6 @@ config ARM_CHARLCD
 	  line and the Linux version on the second line, but that's
 	  still useful.
 
-config BMP085
-	tristate "BMP085 digital pressure sensor"
-	depends on I2C && SYSFS
-	help
-	  If you say yes here you get support for the Bosch Sensortec
-	  BMP085 digital pressure sensor.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bmp085.
-
 config PCH_PHUB
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 	depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index a1aa04a..57473a1 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_INTEL_MID_PTI)	+= pti.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
-obj-$(CONFIG_BMP085)		+= bmp085.o
 obj-$(CONFIG_BMP18X)		+= bmp18x-core.o
 obj-$(CONFIG_BMP18X_I2C)	+= bmp18x-i2c.o
 obj-$(CONFIG_BMP18X_SPI)	+= bmp18x-spi.o
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
deleted file mode 100644
index b29a2be..0000000
--- a/drivers/misc/bmp085.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*  Copyright (c) 2010  Christoph Mair <christoph.mair@...il.com>
-
-    This driver supports the bmp085 digital barometric pressure
-    and temperature sensor from Bosch Sensortec. The datasheet
-    is available from their website:
-    http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
-
-    A pressure measurement is issued by reading from pressure0_input.
-    The return value ranges from 30000 to 110000 pascal with a resulution
-    of 1 pascal (0.01 millibar) which enables measurements from 9000m above
-    to 500m below sea level.
-
-    The temperature can be read from temp0_input. Values range from
-    -400 to 850 representing the ambient temperature in degree celsius
-    multiplied by 10.The resolution is 0.1 celsius.
-
-    Because ambient pressure is temperature dependent, a temperature
-    measurement will be executed automatically even if the user is reading
-    from pressure0_input. This happens if the last temperature measurement
-    has been executed more then one second ago.
-
-    To decrease RMS noise from pressure measurements, the bmp085 can
-    autonomously calculate the average of up to eight samples. This is
-    set up by writing to the oversampling sysfs file. Accepted values
-    are 0, 1, 2 and 3. 2^x when x is the value written to this file
-    specifies the number of samples used to calculate the ambient pressure.
-    RMS noise is specified with six pascal (without averaging) and decreases
-    down to 3 pascal when using an oversampling setting of 3.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-
-#define BMP085_I2C_ADDRESS		0x77
-#define BMP085_CHIP_ID			0x55
-
-#define BMP085_CALIBRATION_DATA_START	0xAA
-#define BMP085_CALIBRATION_DATA_LENGTH	11	/* 16 bit values */
-#define BMP085_CHIP_ID_REG		0xD0
-#define BMP085_VERSION_REG		0xD1
-#define BMP085_CTRL_REG			0xF4
-#define BMP085_TEMP_MEASUREMENT		0x2E
-#define BMP085_PRESSURE_MEASUREMENT	0x34
-#define BMP085_CONVERSION_REGISTER_MSB	0xF6
-#define BMP085_CONVERSION_REGISTER_LSB	0xF7
-#define BMP085_CONVERSION_REGISTER_XLSB	0xF8
-#define BMP085_TEMP_CONVERSION_TIME	5
-
-#define BMP085_CLIENT_NAME		"bmp085"
-
-
-static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
-							I2C_CLIENT_END };
-
-struct bmp085_calibration_data {
-	s16 AC1, AC2, AC3;
-	u16 AC4, AC5, AC6;
-	s16 B1, B2;
-	s16 MB, MC, MD;
-};
-
-
-/* Each client has this additional data */
-struct bmp085_data {
-	struct i2c_client *client;
-	struct mutex lock;
-	struct bmp085_calibration_data calibration;
-	u32 raw_temperature;
-	u32 raw_pressure;
-	unsigned char oversampling_setting;
-	u32 last_temp_measurement;
-	s32 b6; /* calculated temperature correction coefficient */
-};
-
-
-static s32 bmp085_read_calibration_data(struct i2c_client *client)
-{
-	u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
-	struct bmp085_data *data = i2c_get_clientdata(client);
-	struct bmp085_calibration_data *cali = &(data->calibration);
-	s32 status = i2c_smbus_read_i2c_block_data(client,
-				BMP085_CALIBRATION_DATA_START,
-				BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16),
-				(u8 *)tmp);
-	if (status < 0)
-		return status;
-
-	if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16))
-		return -EIO;
-
-	cali->AC1 =  be16_to_cpu(tmp[0]);
-	cali->AC2 =  be16_to_cpu(tmp[1]);
-	cali->AC3 =  be16_to_cpu(tmp[2]);
-	cali->AC4 =  be16_to_cpu(tmp[3]);
-	cali->AC5 =  be16_to_cpu(tmp[4]);
-	cali->AC6 = be16_to_cpu(tmp[5]);
-	cali->B1 = be16_to_cpu(tmp[6]);
-	cali->B2 = be16_to_cpu(tmp[7]);
-	cali->MB = be16_to_cpu(tmp[8]);
-	cali->MC = be16_to_cpu(tmp[9]);
-	cali->MD = be16_to_cpu(tmp[10]);
-	return 0;
-}
-
-
-static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
-{
-	u16 tmp;
-	s32 status;
-
-	mutex_lock(&data->lock);
-	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
-						BMP085_TEMP_MEASUREMENT);
-	if (status != 0) {
-		dev_err(&data->client->dev,
-			"Error while requesting temperature measurement.\n");
-		goto exit;
-	}
-	msleep(BMP085_TEMP_CONVERSION_TIME);
-
-	status = i2c_smbus_read_i2c_block_data(data->client,
-		BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
-	if (status < 0)
-		goto exit;
-	if (status != sizeof(tmp)) {
-		dev_err(&data->client->dev,
-			"Error while reading temperature measurement result\n");
-		status = -EIO;
-		goto exit;
-	}
-	data->raw_temperature = be16_to_cpu(tmp);
-	data->last_temp_measurement = jiffies;
-	status = 0;	/* everything ok, return 0 */
-
-exit:
-	mutex_unlock(&data->lock);
-	return status;
-}
-
-static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
-{
-	u32 tmp = 0;
-	s32 status;
-
-	mutex_lock(&data->lock);
-	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
-		BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6));
-	if (status != 0) {
-		dev_err(&data->client->dev,
-			"Error while requesting pressure measurement.\n");
-		goto exit;
-	}
-
-	/* wait for the end of conversion */
-	msleep(2+(3 << data->oversampling_setting));
-
-	/* copy data into a u32 (4 bytes), but skip the first byte. */
-	status = i2c_smbus_read_i2c_block_data(data->client,
-			BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
-	if (status < 0)
-		goto exit;
-	if (status != 3) {
-		dev_err(&data->client->dev,
-			"Error while reading pressure measurement results\n");
-		status = -EIO;
-		goto exit;
-	}
-	data->raw_pressure = be32_to_cpu((tmp));
-	data->raw_pressure >>= (8-data->oversampling_setting);
-	status = 0;	/* everything ok, return 0 */
-
-exit:
-	mutex_unlock(&data->lock);
-	return status;
-}
-
-
-/*
- * This function starts the temperature measurement and returns the value
- * in tenth of a degree celsius.
- */
-static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
-{
-	struct bmp085_calibration_data *cali = &data->calibration;
-	long x1, x2;
-	int status;
-
-	status = bmp085_update_raw_temperature(data);
-	if (status != 0)
-		goto exit;
-
-	x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
-	x2 = (cali->MC << 11) / (x1 + cali->MD);
-	data->b6 = x1 + x2 - 4000;
-	/* if NULL just update b6. Used for pressure only measurements */
-	if (temperature != NULL)
-		*temperature = (x1+x2+8) >> 4;
-
-exit:
-	return status;
-}
-
-/*
- * This function starts the pressure measurement and returns the value
- * in millibar. Since the pressure depends on the ambient temperature,
- * a temperature measurement is executed if the last known value is older
- * than one second.
- */
-static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
-{
-	struct bmp085_calibration_data *cali = &data->calibration;
-	s32 x1, x2, x3, b3;
-	u32 b4, b7;
-	s32 p;
-	int status;
-
-	/* alt least every second force an update of the ambient temperature */
-	if (data->last_temp_measurement + 1*HZ < jiffies) {
-		status = bmp085_get_temperature(data, NULL);
-		if (status != 0)
-			goto exit;
-	}
-
-	status = bmp085_update_raw_pressure(data);
-	if (status != 0)
-		goto exit;
-
-	x1 = (data->b6 * data->b6) >> 12;
-	x1 *= cali->B2;
-	x1 >>= 11;
-
-	x2 = cali->AC2 * data->b6;
-	x2 >>= 11;
-
-	x3 = x1 + x2;
-
-	b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
-	b3 >>= 2;
-
-	x1 = (cali->AC3 * data->b6) >> 13;
-	x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
-	x3 = (x1 + x2 + 2) >> 2;
-	b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
-
-	b7 = ((u32)data->raw_pressure - b3) *
-					(50000 >> data->oversampling_setting);
-	p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
-
-	x1 = p >> 8;
-	x1 *= x1;
-	x1 = (x1 * 3038) >> 16;
-	x2 = (-7357 * p) >> 16;
-	p += (x1 + x2 + 3791) >> 4;
-
-	*pressure = p;
-
-exit:
-	return status;
-}
-
-/*
- * This function sets the chip-internal oversampling. Valid values are 0..3.
- * The chip will use 2^oversampling samples for internal averaging.
- * This influences the measurement time and the accuracy; larger values
- * increase both. The datasheet gives on overview on how measurement time,
- * accuracy and noise correlate.
- */
-static void bmp085_set_oversampling(struct bmp085_data *data,
-						unsigned char oversampling)
-{
-	if (oversampling > 3)
-		oversampling = 3;
-	data->oversampling_setting = oversampling;
-}
-
-/*
- * Returns the currently selected oversampling. Range: 0..3
- */
-static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
-{
-	return data->oversampling_setting;
-}
-
-/* sysfs callbacks */
-static ssize_t set_oversampling(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
-	unsigned long oversampling;
-	int success = strict_strtoul(buf, 10, &oversampling);
-	if (success == 0) {
-		bmp085_set_oversampling(data, oversampling);
-		return count;
-	}
-	return success;
-}
-
-static ssize_t show_oversampling(struct device *dev,
-				 struct device_attribute *attr, char *buf)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
-	return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
-}
-static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
-					show_oversampling, set_oversampling);
-
-
-static ssize_t show_temperature(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	int temperature;
-	int status;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
-
-	status = bmp085_get_temperature(data, &temperature);
-	if (status != 0)
-		return status;
-	else
-		return sprintf(buf, "%d\n", temperature);
-}
-static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
-
-
-static ssize_t show_pressure(struct device *dev,
-			     struct device_attribute *attr, char *buf)
-{
-	int pressure;
-	int status;
-	struct i2c_client *client = to_i2c_client(dev);
-	struct bmp085_data *data = i2c_get_clientdata(client);
-
-	status = bmp085_get_pressure(data, &pressure);
-	if (status != 0)
-		return status;
-	else
-		return sprintf(buf, "%d\n", pressure);
-}
-static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
-
-
-static struct attribute *bmp085_attributes[] = {
-	&dev_attr_temp0_input.attr,
-	&dev_attr_pressure0_input.attr,
-	&dev_attr_oversampling.attr,
-	NULL
-};
-
-static const struct attribute_group bmp085_attr_group = {
-	.attrs = bmp085_attributes,
-};
-
-static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
-{
-	if (client->addr != BMP085_I2C_ADDRESS)
-		return -ENODEV;
-
-	if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int bmp085_init_client(struct i2c_client *client)
-{
-	unsigned char version;
-	int status;
-	struct bmp085_data *data = i2c_get_clientdata(client);
-	data->client = client;
-	status = bmp085_read_calibration_data(client);
-	if (status != 0)
-		goto exit;
-	version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG);
-	data->last_temp_measurement = 0;
-	data->oversampling_setting = 3;
-	mutex_init(&data->lock);
-	dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n",
-			(version & 0x0F), (version & 0xF0) >> 4);
-exit:
-	return status;
-}
-
-static int __devinit bmp085_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct bmp085_data *data;
-	int err = 0;
-
-	data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	/* default settings after POR */
-	data->oversampling_setting = 0x00;
-
-	i2c_set_clientdata(client, data);
-
-	/* Initialize the BMP085 chip */
-	err = bmp085_init_client(client);
-	if (err != 0)
-		goto exit_free;
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
-	if (err)
-		goto exit_free;
-
-	dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
-	goto exit;
-
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
-static int __devexit bmp085_remove(struct i2c_client *client)
-{
-	sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
-	kfree(i2c_get_clientdata(client));
-	return 0;
-}
-
-static const struct i2c_device_id bmp085_id[] = {
-	{ "bmp085", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, bmp085_id);
-
-static struct i2c_driver bmp085_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name	= "bmp085"
-	},
-	.id_table	= bmp085_id,
-	.probe		= bmp085_probe,
-	.remove		= __devexit_p(bmp085_remove),
-
-	.detect		= bmp085_detect,
-	.address_list	= normal_i2c
-};
-
-static int __init bmp085_init(void)
-{
-	return i2c_add_driver(&bmp085_driver);
-}
-
-static void __exit bmp085_exit(void)
-{
-	i2c_del_driver(&bmp085_driver);
-}
-
-
-MODULE_AUTHOR("Christoph Mair <christoph.mair@...il.com");
-MODULE_DESCRIPTION("BMP085 driver");
-MODULE_LICENSE("GPL");
-
-module_init(bmp085_init);
-module_exit(bmp085_exit);
-- 
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists