[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA6KcBAy0iu1KU9Nc0TTB77XNth_h+4M-Uqw96nkP-ypX2jAAA@mail.gmail.com>
Date: Tue, 28 Feb 2012 20:07:32 -0800
From: Matthew Dharm <mdharm-usb@...-eyed-alien.net>
To: Meng Zhang (张萌) <Meng.Zhang@...iatek.com>
Cc: Alan Stern <stern@...land.harvard.edu>,
Josua Dietze <digidietze@...isberghof.de>,
Phil Dibowitz <phil@...m.com>,
USB list <linux-usb@...r.kernel.org>,
USB Storage list <usb-storage@...ts.one-eyed-alien.net>,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] USB: Mass Storage: Add MediaTek MT6276M device entry
Devices should not be added to unusual_devs.h unless the device CANNOT
use the usb_modeswitch method. This most commonly applies when the
device's usb-storage emulation is poor, and the probing commands sent
by usb-storage cause the device to crash.
It is much more convenient for users to just upgrade their
usb_modeswitch utility than it is for them to upgrade a kernel, which
is much more difficult and much more rare. As for 'input command
manually', that is what udev scripts are for.
If this can be handled from userspace by usb_modeswitch, then that is
where it should be done.
Matt
2012/2/28 Meng Zhang (张萌) <Meng.Zhang@...iatek.com>:
> Hi Alan,
>
> As far as I know, many other devices used this init function in unusual_devs.h for their "ZeroCD" feature, and I think this is more convenient than let device user install utilities like usb_modeswitch and input command manually.
>
> Thanks.
>
> BR.
> Meng Zhang
>
> -----Original Message-----
> From: linux-usb-owner@...r.kernel.org [mailto:linux-usb-owner@...r.kernel.org] On Behalf Of Alan Stern
> Sent: Tuesday, February 28, 2012 11:31 PM
> To: Meng Zhang (张萌)
> Cc: Josua Dietze; Matthew Dharm; Phil Dibowitz; USB list; USB Storage list; Kernel development list
> Subject: Re: [PATCH] USB: Mass Storage: Add MediaTek MT6276M device entry
>
> On Tue, 28 Feb 2012, Meng Zhang wrote:
>
>> from: Meng Zhang <meng.zhang@...iatek.com>
>>
>> 1. Add entrys for mediatek MT6276M in unusual_devs.h
>>
>> 2. Add init function for mediatek MT6276M to switch to COM port mode
>>
>> 3. usb-devices outputs after running with this patch:
>> T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 48 Spd=480 MxCh= 0
>> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>> P: Vendor=0e8d ProdID=00a1 Rev=02.00
>> S: Manufacturer=MediaTek Inc
>> S: Product=Product
>> C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
>> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
>> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
>>
>> 4. patch based on branch:
>> git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>
>>
>> Signed-off-by: Meng Zhang <meng.zhang@...iatek.com>
>
> Nowadays, aren't such things handled in userspace by the usb_modeswitch program rather than in the kernel driver?
>
> Alan Stern
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Matthew Dharm
Maintainer, USB Mass Storage driver for Linux
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists