lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120304052517.GA10743@S2101-09.ap.freescale.net>
Date:	Sun, 4 Mar 2012 13:25:21 +0800
From:	Shawn Guo <shawn.guo@...aro.org>
To:	"Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linaro-dev@...ts.linaro.org, patches@...aro.org,
	Samuel Ortiz <sameo@...ux.intel.com>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Venu Byravarasu <vbyravarasu@...dia.com>,
	Peter Korsgaard <jacmet@...site.dk>
Subject: Re: [PATCH v7 1/2] mfd: Add anatop mfd driver

On Sun, Mar 04, 2012 at 01:39:12AM +0800, Ying-Chun Liu (PaulLiu) wrote:
> From: "Ying-Chun Liu (PaulLiu)" <paul.liu@...aro.org>
> 
> Anatop is a mfd chip embedded in Freescale i.MX6Q SoC.
> Anatop provides regulators and thermal.
> This driver handles the address space and the operation of the mfd device.
> 
> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
> Cc: Samuel Ortiz <sameo@...ux.intel.com>
> Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>
> Cc: Shawn Guo <shawn.guo@...aro.org>

A few trivial comments below, otherwise

Acked-by: Shawn Guo <shawn.guo@...aro.org>

> Cc: Venu Byravarasu <vbyravarasu@...dia.com>
> Cc: Peter Korsgaard <jacmet@...site.dk>
> ---
>  drivers/mfd/Kconfig        |    6 ++
>  drivers/mfd/Makefile       |    1 +
>  drivers/mfd/anatop-mfd.c   |  142 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/anatop.h |   40 ++++++++++++
>  4 files changed, 189 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mfd/anatop-mfd.c
>  create mode 100644 include/linux/mfd/anatop.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index f147395..78593e8 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -830,6 +830,12 @@ config MFD_INTEL_MSIC
>  	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
>  	  devices used in Intel Medfield platforms.
>  
> +config MFD_ANATOP
> +	bool "Support for Anatop"

It might worth a more descriptive prompt, something like
"Support Freescale i.MX on-chip ANATOP controller"?

> +	depends on SOC_IMX6Q
> +	help
> +	  Select this option to enable Anatop MFD driver.

Ditto, a more descriptive help?

> +
>  endmenu
>  endif
>  
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index b953bab..8e11060 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -112,3 +112,4 @@ obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
>  obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
>  obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
>  obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o
> +obj-$(CONFIG_MFD_ANATOP)	+= anatop-mfd.o
> diff --git a/drivers/mfd/anatop-mfd.c b/drivers/mfd/anatop-mfd.c
> new file mode 100644
> index 0000000..0307051
> --- /dev/null
> +++ b/drivers/mfd/anatop-mfd.c
> @@ -0,0 +1,142 @@
> +/*
> + * Anatop MFD driver
> + *
> + * Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
> + * Copyright (C) 2012 Linaro
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *   (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License along
> + *  with this program; if not, write to the Free Software Foundation, Inc.,
> + *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *  (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License along
> + *  with this program; if not, write to the Free Software Foundation, Inc.,
> + *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + *
> + */
> +
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/mfd/anatop.h>
> +
> +u32 anatop_get_bits(struct anatop *adata, u32 addr, int bit_shift, int bits)
> +{
> +	u32 val;
> +	int mask;

Shouldn't mask be also u32?  Then "u32 val, mask;"?
> +
> +	if (bits == 32)
> +		mask = ~0;
> +	else
> +		mask = (1 << bits) - 1;
> +
> +	val = readl(adata->ioreg + addr);
> +	val = (val >> bit_shift) & mask;
> +
> +	return val;
> +}
> +EXPORT_SYMBOL(anatop_get_bits);
> +
> +void anatop_set_bits(struct anatop *adata, u32 addr, int bit_shift,
> +		     int bits, u32 data)
> +{
> +	u32 val;
> +	int mask;

Ditto, with a blank line to be consistent with above function.

> +	if (bits == 32)
> +		mask = ~0;
> +	else
> +		mask = (1 << bits) - 1;
> +
> +	spin_lock(&adata->reglock);
> +	val = readl(adata->ioreg + addr) & ~(mask << bit_shift);
> +	writel((data << bit_shift) | val, adata->ioreg);
> +	spin_unlock(&adata->reglock);
> +}
> +EXPORT_SYMBOL(anatop_set_bits);
> +
> +static const struct of_device_id of_anatop_subdevice_match[] = {
> +	{ .compatible = "fsl,anatop-regulator", },
> +	{ .compatible = "fsl,anatop-thermal", },
> +	{ },
> +};
> +
> +static int of_anatop_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	void *ioreg;
> +	struct anatop *drvdata;
> +
> +	ioreg = of_iomap(np, 0);
> +	if (!ioreg)
> +		return -EINVAL;

return -EADDRNOTAVAIL;

> +	drvdata = devm_kzalloc(dev, sizeof(struct anatop), GFP_KERNEL);
> +	if (!drvdata)
> +		return -EINVAL;

return -ENOMEM;

The bonus point is we can know the failure cause from error number,
with no need of error message.

Regards,
Shawn

> +	drvdata->ioreg = ioreg;
> +	spin_lock_init(&drvdata->reglock);
> +	platform_set_drvdata(pdev, drvdata);
> +	of_platform_bus_probe(np, of_anatop_subdevice_match, dev);
> +
> +	return 0;
> +}
> +
> +static int of_anatop_remove(struct platform_device *pdev)
> +{
> +	struct anatop *drvdata;
> +	drvdata = platform_get_drvdata(pdev);
> +	iounmap(drvdata->ioreg);
> +	return 0;
> +}
> +
> +static const struct of_device_id of_anatop_match[] = {
> +	{ .compatible = "fsl,imx6q-anatop", },
> +	{ },
> +};
> +
> +static struct platform_driver anatop_of_driver = {
> +	.driver = {
> +		.name = "anatop-mfd",
> +		.owner = THIS_MODULE,
> +		.of_match_table = of_anatop_match,
> +	},
> +	.probe		= of_anatop_probe,
> +	.remove		= of_anatop_remove,
> +};
> +
> +static int __init anatop_init(void)
> +{
> +	return platform_driver_register(&anatop_of_driver);
> +}
> +postcore_initcall(anatop_init);
> +
> +static void __exit anatop_exit(void)
> +{
> +	platform_driver_unregister(&anatop_of_driver);
> +}
> +module_exit(anatop_exit);
> +
> +MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>");
> +MODULE_DESCRIPTION("ANATOP MFD driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/anatop.h b/include/linux/mfd/anatop.h
> new file mode 100644
> index 0000000..22c1007
> --- /dev/null
> +++ b/include/linux/mfd/anatop.h
> @@ -0,0 +1,40 @@
> +/*
> + * anatop.h - Anatop MFD driver
> + *
> + *  Copyright (C) 2012 Ying-Chun Liu (PaulLiu) <paul.liu@...aro.org>
> + *  Copyright (C) 2012 Linaro
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#ifndef __LINUX_MFD_ANATOP_H
> +#define __LINUX_MFD_ANATOP_H
> +
> +#include <linux/spinlock.h>
> +
> +/**
> + * anatop - MFD data
> + * @ioreg: ioremap register
> + * @reglock: spinlock for register read/write
> + */
> +struct anatop {
> +	void *ioreg;
> +	spinlock_t reglock;
> +};
> +
> +extern u32 anatop_get_bits(struct anatop *, u32, int, int);
> +extern void anatop_set_bits(struct anatop *, u32, int, int, u32);
> +
> +#endif /*  __LINUX_MFD_ANATOP_H */
> -- 
> 1.7.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ