| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 5 Mar 2012 14:52:24 +0100
From: Jiri Slaby <jslaby@...e.cz>
To: gregkh@...uxfoundation.org
Cc: alan@...ux.intel.com, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org, jirislaby@...il.com,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Tony Luck <tony.luck@...el.com>,
Fenghua Yu <fenghua.yu@...el.com>
Subject: [PATCH 37/68] TTY: amiserial/simserial, use tty_port
Add tty_port to serial_state and start using common tty port members
from tty_port in amiserial and simserial. The rest will follow one by
one.
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
Cc: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Tony Luck <tony.luck@...el.com>
Cc: Fenghua Yu <fenghua.yu@...el.com>
---
arch/ia64/hp/sim/simserial.c | 24 ++++++++--------
drivers/tty/amiserial.c | 63 +++++++++++++++++++++---------------------
include/linux/serialP.h | 7 ++---
3 files changed, 45 insertions(+), 49 deletions(-)
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index a76a27e..614c091 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -165,7 +165,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
{
struct serial_state *info = dev_id;
- if (!info->tty) {
+ if (!info->tport.tty) {
printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
return IRQ_NONE;
}
@@ -173,7 +173,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
* pretty simple in our case, because we only get interrupts
* on inbound traffic
*/
- receive_chars(info->tty);
+ receive_chars(info->tport.tty);
return IRQ_HANDLED;
}
@@ -533,14 +533,14 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
shutdown(tty, info);
rs_flush_buffer(tty);
tty_ldisc_flush(tty);
- info->tty = NULL;
- if (info->blocked_open) {
+ info->tport.tty = NULL;
+ if (info->tport.blocked_open) {
if (info->close_delay)
schedule_timeout_interruptible(info->close_delay);
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->tport.open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
+ wake_up_interruptible(&info->tport.close_wait);
}
/*
@@ -569,8 +569,8 @@ static void rs_hangup(struct tty_struct *tty)
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->tport.tty = NULL;
+ wake_up_interruptible(&info->tport.open_wait);
}
@@ -662,8 +662,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
unsigned long page;
info->count++;
- info->tty = tty;
+ info->tport.tty = tty;
tty->driver_data = info;
+ tty->port = &info->tport;
#ifdef SIMSERIAL_DEBUG
printk("rs_open %s, count = %d\n", tty->name, info->count);
@@ -685,7 +686,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
*/
if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -827,8 +828,7 @@ simrs_init (void)
* Let's have a little bit of fun !
*/
for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
- init_waitqueue_head(&state->open_wait);
- init_waitqueue_head(&state->close_wait);
+ tty_port_init(&state->tport);
if (state->type == PORT_UNKNOWN) continue;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 5b87744..71d3331 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -234,7 +234,7 @@ static void receive_chars(struct serial_state *info)
{
int status;
int serdatr;
- struct tty_struct *tty = info->tty;
+ struct tty_struct *tty = info->tport.tty;
unsigned char ch, flag;
struct async_icount *icount;
int oe = 0;
@@ -331,8 +331,8 @@ static void transmit_chars(struct serial_state *info)
return;
}
if (info->xmit.head == info->xmit.tail
- || info->tty->stopped
- || info->tty->hw_stopped) {
+ || info->tport.tty->stopped
+ || info->tport.tty->hw_stopped) {
info->IER &= ~UART_IER_THRI;
custom.intena = IF_TBE;
mb();
@@ -347,7 +347,7 @@ static void transmit_chars(struct serial_state *info)
if (CIRC_CNT(info->xmit.head,
info->xmit.tail,
SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
#ifdef SERIAL_DEBUG_INTR
printk("THRE...");
@@ -384,7 +384,7 @@ static void check_modem_status(struct serial_state *info)
}
if (dstatus & SER_CTS)
icount->cts++;
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
}
if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
@@ -393,29 +393,29 @@ static void check_modem_status(struct serial_state *info)
(!(status & SER_DCD)) ? "on" : "off");
#endif
if (!(status & SER_DCD))
- wake_up_interruptible(&info->open_wait);
+ wake_up_interruptible(&info->tport.open_wait);
else {
#ifdef SERIAL_DEBUG_OPEN
printk("doing serial hangup...");
#endif
- if (info->tty)
- tty_hangup(info->tty);
+ if (info->tport.tty)
+ tty_hangup(info->tport.tty);
}
}
if (info->flags & ASYNC_CTS_FLOW) {
- if (info->tty->hw_stopped) {
+ if (info->tport.tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx start...");
#endif
- info->tty->hw_stopped = 0;
+ info->tport.tty->hw_stopped = 0;
info->IER |= UART_IER_THRI;
custom.intena = IF_SETCLR | IF_TBE;
mb();
/* set a pending Tx Interrupt, transmitter should restart now */
custom.intreq = IF_SETCLR | IF_TBE;
mb();
- tty_wakeup(info->tty);
+ tty_wakeup(info->tport.tty);
return;
}
} else {
@@ -423,7 +423,7 @@ static void check_modem_status(struct serial_state *info)
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
printk("CTS tx stop...");
#endif
- info->tty->hw_stopped = 1;
+ info->tport.tty->hw_stopped = 1;
info->IER &= ~UART_IER_THRI;
/* disable Tx interrupt and remove any pending interrupts */
custom.intena = IF_TBE;
@@ -456,7 +456,7 @@ static irqreturn_t ser_rx_int(int irq, void *dev_id)
printk("ser_rx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
receive_chars(info);
@@ -475,7 +475,7 @@ static irqreturn_t ser_tx_int(int irq, void *dev_id)
printk("ser_tx_int...");
#endif
- if (!info->tty)
+ if (!info->tport.tty)
return IRQ_NONE;
transmit_chars(info);
@@ -607,7 +607,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
* here so the queue might never be waken up
*/
- wake_up_interruptible(&info->delta_msr_wait);
+ wake_up_interruptible(&info->tport.delta_msr_wait);
/*
* Free the IRQ, if necessary
@@ -1274,7 +1274,7 @@ static int rs_ioctl(struct tty_struct *tty,
cprev = info->icount;
local_irq_restore(flags);
while (1) {
- interruptible_sleep_on(&info->delta_msr_wait);
+ interruptible_sleep_on(&info->tport.delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
@@ -1442,15 +1442,15 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
tty_ldisc_flush(tty);
tty->closing = 0;
- state->tty = NULL;
- if (state->blocked_open) {
+ state->tport.tty = NULL;
+ if (state->tport.blocked_open) {
if (state->close_delay) {
msleep_interruptible(jiffies_to_msecs(state->close_delay));
}
- wake_up_interruptible(&state->open_wait);
+ wake_up_interruptible(&state->tport.open_wait);
}
state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&state->close_wait);
+ wake_up_interruptible(&state->tport.close_wait);
local_irq_restore(flags);
}
@@ -1531,8 +1531,8 @@ static void rs_hangup(struct tty_struct *tty)
shutdown(tty, info);
info->count = 0;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
- info->tty = NULL;
- wake_up_interruptible(&info->open_wait);
+ info->tport.tty = NULL;
+ wake_up_interruptible(&info->tport.open_wait);
}
/*
@@ -1559,7 +1559,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1589,7 +1589,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->open_wait, &wait);
+ add_wait_queue(&info->tport.open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
info->line, info->count);
@@ -1600,7 +1600,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
info->count--;
}
local_irq_restore(flags);
- info->blocked_open++;
+ info->tport.blocked_open++;
while (1) {
local_irq_save(flags);
if (tty->termios->c_cflag & CBAUD)
@@ -1635,10 +1635,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
tty_lock();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
+ remove_wait_queue(&info->tport.open_wait, &wait);
if (extra_count)
info->count++;
- info->blocked_open--;
+ info->tport.blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
info->line, info->count);
@@ -1661,8 +1661,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
int retval;
info->count++;
- info->tty = tty;
+ info->tport.tty = tty;
tty->driver_data = info;
+ tty->port = &info->tport;
if (serial_paranoia_check(info, tty->name, "rs_open"))
return -ENODEV;
@@ -1677,7 +1678,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
if (tty_hung_up_p(filp) ||
(info->flags & ASYNC_CLOSING)) {
if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
+ interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
return ((info->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
@@ -1869,9 +1870,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
- init_waitqueue_head(&state->open_wait);
- init_waitqueue_head(&state->close_wait);
- init_waitqueue_head(&state->delta_msr_wait);
+ tty_port_init(&state->tport);
printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
state->line);
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
index 984f5ba..32d45b8 100644
--- a/include/linux/serialP.h
+++ b/include/linux/serialP.h
@@ -23,6 +23,7 @@
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/circ_buf.h>
+#include <linux/tty.h>
#include <linux/wait.h>
struct serial_state {
@@ -38,6 +39,7 @@ struct serial_state {
unsigned short close_delay;
unsigned short closing_wait; /* time to wait before closing */
struct async_icount icount;
+ struct tty_port tport;
/* amiserial */
int read_status_mask;
@@ -46,14 +48,9 @@ struct serial_state {
int quot;
int IER; /* Interrupt Enable Register */
int MCR; /* Modem control register */
- wait_queue_head_t delta_msr_wait;
/* simserial */
int x_char; /* xon/xoff character */
- int blocked_open; /* # of blocked opens */
struct circ_buf xmit;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct tty_struct *tty;
/* /simserial */
/* /amiserial */
};
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists