Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.3.0-rc3+ (root@metallica.lab.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #59 SMP Thu Mar 1 11:59:00 EST 2012 Command line: ro root=UUID=fcd9cac9-0500-4c87-b1e0-f992ee94c289 console=ttyS1 crashkernel=auto SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us selinux=0 maxcpus=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000d7e66000 (usable) BIOS-e820: 00000000d7e66000 - 00000000d7e6e000 (ACPI data) BIOS-e820: 00000000d7e6e000 - 00000000d7e6f000 (usable) BIOS-e820: 00000000d7e6f000 - 00000000d8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000127fff000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: HP ProLiant DL320 G5p, BIOS W05 02/26/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x127fff max_arch_pfn = 0x400000000 MTRR default type: write-back MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0D8000000 mask FF8000000 uncachable 1 base 0E0000000 mask FE0000000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xd7e6f max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000f4f80] f4f80 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000d7e6f000 0000000000 - 00d7e00000 page 2M 00d7e00000 - 00d7e6f000 page 4k kernel direct mapping tables up to d7e6f000 @ 1fffa000-20000000 init_memory_mapping: 0000000100000000-0000000127fff000 0100000000 - 0127e00000 page 2M 0127e00000 - 0127fff000 page 4k kernel direct mapping tables up to 127fff000 @ d7e5f000-d7e66000 RAMDISK: 37aa9000 - 37ff0000 crashkernel: memory value expected ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 00000000d7e667c0 00074 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: FACP 00000000d7e66840 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20120111/tbfadt-629) ACPI: DSDT 00000000d7e66940 02D59 (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 00000000d7e66100 00040 ACPI: SPCR 00000000d7e66140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 00000000d7e661c0 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 00000000d7e66200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: SPMI 00000000d7e66240 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: ERST 00000000d7e66280 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 00000000d7e66480 00092 (v01 HP ProLiant 00000002 00000000) ACPI: FFFF 00000000d7e66540 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: BERT 00000000d7e666c0 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: HEST 00000000d7e66700 000BC (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000127fff000 Initmem setup node 0 0000000000000000-0000000127fff000 NODE_DATA [0000000127fd8000 - 0000000127ffefff] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880123600000-ffff880126ffffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00127fff Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000d7e66 0: 0x000d7e6e -> 0x000d7e6f 0: 0x00100000 -> 0x00127fff On node 0 totalpages: 1048053 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3922 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 865951 pages, LIFO batch:31 Normal zone: 2240 pages used for memmap Normal zone: 161599 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10228201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000d7e66000 - 00000000d7e6e000 PM: Registered nosave memory: 00000000d7e6f000 - 00000000d8000000 PM: Registered nosave memory: 00000000d8000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d8000000 (gap: d8000000:26c00000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880127c00000 s82304 r8192 d24192 u262144 pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031472 Policy zone: Normal Kernel command line: ro root=UUID=fcd9cac9-0500-4c87-b1e0-f992ee94c289 console=ttyS1 crashkernel=auto SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us selinux=0 maxcpus=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Memory: 4042600k/4849660k available (6535k kernel code, 657448k absent, 149612k reserved, 6800k data, 1468k init) Hierarchical RCU implementation. NR_IRQS:262400 nr_irqs:744 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [ttyS1] enabled allocated 16777216 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2128.033 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.06 BogoMIPS (lpj=2128033) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. SMP alternatives: switching to UP code ACPI: Core revision 20120111 ftrace: allocating 23839 entries in 94 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz stepping 0b Performance Events: PEBS fmt0+, Core2 events, Broken BIOS detected, complain to your hardware vendor. [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) Intel PMU driver. PEBS disabled due to CPU errata. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 NMI watchdog enabled, takes one hw-pmu counter. Brought up 1 CPUs Total of 1 processors activated (4256.06 BogoMIPS). devtmpfs: initialized print_constraints: dummy: NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20120111/dsopcode-236) ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880121e989e8), AE_AML_BUFFER_LIMIT (20120111/psparse-536) ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. HEST: Table parsing has been initialized. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xfebfffff] pci 0000:00:00.0: [8086:29f0] type 0 class 0x000600 pci 0000:00:01.0: [8086:29f1] type 1 class 0x000604 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [8086:29f9] type 1 class 0x000604 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604 pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xfdbf0000-0xfdbf03ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0300 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 007f) pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x1080-0x1087] pci 0000:00:1f.2: reg 14: [io 0x1088-0x108b] pci 0000:00:1f.2: reg 18: [io 0x1090-0x1097] pci 0000:00:1f.2: reg 1c: [io 0x1098-0x109b] pci 0000:00:1f.2: reg 20: [io 0x10a0-0x10af] pci 0000:00:1f.2: reg 24: [io 0x10b0-0x10bf] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 pci 0000:00:1f.5: reg 10: [io 0x10c0-0x10c7] pci 0000:00:1f.5: reg 14: [io 0x10c8-0x10cb] pci 0000:00:1f.5: reg 18: [io 0x10d0-0x10d7] pci 0000:00:1f.5: reg 1c: [io 0x10d8-0x10db] pci 0000:00:1f.5: reg 20: [io 0x10e0-0x10ef] pci 0000:00:1f.5: reg 24: [io 0x10f0-0x10ff] pci 0000:15:00.0: [1077:2432] type 0 class 0x000c04 pci 0000:15:00.0: reg 10: [io 0x4000-0x40ff] pci 0000:15:00.0: reg 14: [mem 0xfdff0000-0xfdff3fff 64bit] pci 0000:15:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] pci 0000:15:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:01.0: PCI bridge to [bus 15-1a] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:06.0: PCI bridge to [bus 12-14] pci 0000:02:00.0: [1166:0103] type 1 class 0x000604 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:03:04.0: [14e4:1678] type 0 class 0x000200 pci 0000:03:04.0: reg 10: [mem 0xfdef0000-0xfdefffff 64bit] pci 0000:03:04.0: reg 18: [mem 0xfdee0000-0xfdeeffff 64bit] pci 0000:03:04.0: PME# supported from D3hot D3cold pci 0000:03:04.1: [14e4:1678] type 0 class 0x000200 pci 0000:03:04.1: reg 10: [mem 0xfded0000-0xfdedffff 64bit] pci 0000:03:04.1: reg 18: [mem 0xfdec0000-0xfdecffff 64bit] pci 0000:03:04.1: PME# supported from D3hot D3cold pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:1c.2: PCI bridge to [bus 04-06] pci 0000:00:1c.3: PCI bridge to [bus 07-09] pci 0000:00:1c.4: PCI bridge to [bus 0a-0c] pci 0000:00:1c.5: PCI bridge to [bus 0d-11] pci 0000:01:02.0: [1002:515e] type 0 class 0x000300 pci 0000:01:02.0: reg 10: [mem 0xd8000000-0xdfffffff pref] pci 0000:01:02.0: reg 14: [io 0x3000-0x30ff] pci 0000:01:02.0: reg 18: [mem 0xfddf0000-0xfddfffff] pci 0000:01:02.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:02.0: supports D1 D2 pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880 pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] pci 0000:01:04.0: reg 14: [mem 0xfdde0000-0xfdde01ff] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880 pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff] pci 0000:01:04.2: reg 14: [mem 0xfddd0000-0xfddd07ff] pci 0000:01:04.2: reg 18: [mem 0xfddc0000-0xfddc3fff] pci 0000:01:04.2: reg 1c: [mem 0xfdd00000-0xfdd7ffff] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold pci 0000:01:04.4: [103c:3300] type 0 class 0x000c03 pci 0000:01:04.4: reg 20: [io 0x3800-0x381f] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold pci 0000:01:04.6: [103c:3302] type 0 class 0x000c07 pci 0000:01:04.6: reg 10: [mem 0xfdcf0000-0xfdcf00ff] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfddfffff] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xfebfffff] (subtractive decode) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHE.BCME._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG2._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) vgaarb: device added: PCI:0000:01:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000d7e66000 - 00000000d7ffffff reserve RAM buffer: 00000000d7e6f000 - 00000000d7ffffff reserve RAM buffer: 0000000127fff000 - 0000000127ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default HPET: 4 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-7f] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0xd8000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x0070-0x0077] pnp 00:01: [io 0x0408-0x040f] pnp 00:01: [io 0x04d0-0x04d1] pnp 00:01: [io 0x0020-0x003f] pnp 00:01: [io 0x00a0-0x00bf] pnp 00:01: [io 0x0090-0x009f] pnp 00:01: [io 0x0050-0x0053] pnp 00:01: [io 0x00f0] pnp 00:01: [io 0x0700-0x071f] pnp 00:01: [io 0x0800-0x083f] pnp 00:01: [io 0x0900-0x097f] pnp 00:01: [io 0x0010-0x001f] pnp 00:01: [io 0x0c80-0x0c83] pnp 00:01: [io 0x0ca2-0x0ca5] pnp 00:01: [io 0x0cd4-0x0cd7] pnp 00:01: [io 0x0f50-0x0f58] pnp 00:01: [io 0x00f0] pnp 00:01: [io 0x0ca0-0x0ca1] pnp 00:01: [io 0x0ca4-0x0ca5] pnp 00:01: [mem 0xe0000000-0xefffffff] pnp 00:01: [io 0x02f8-0x02ff] system 00:01: [io 0x0408-0x040f] has been reserved system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0700-0x071f] has been reserved system 00:01: [io 0x0800-0x083f] has been reserved system 00:01: [io 0x0900-0x097f] has been reserved system 00:01: [io 0x0c80-0x0c83] has been reserved system 00:01: [io 0x0ca2-0x0ca5] has been reserved system 00:01: [io 0x0cd4-0x0cd7] has been reserved system 00:01: [io 0x0f50-0x0f58] has been reserved system 00:01: [io 0x0ca0-0x0ca1] has been reserved system 00:01: [io 0x0ca4-0x0ca5] has been reserved system 00:01: [io 0x02f8-0x02ff] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0ca2-0x0ca3] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [dma 7] pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0060] pnp 00:06: [io 0x0064] pnp 00:06: [irq 1] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:07: [irq 12] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) pnp 00:08: [io 0x002e-0x002f] pnp 00:08: [io 0x004e-0x004f] pnp 00:08: [io 0x0620-0x065f] pnp 00:08: [io 0x0680-0x069f] pnp 00:08: [io 0x0600-0x061f] pnp 00:08: [io 0x0660-0x067f] pnp 00:08: [io 0x0300-0x030f] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) pnp 00:09: [irq 4] pnp 00:09: [io 0x03f8-0x03ff] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:01.0: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref] pci 0000:15:00.0: BAR 6: assigned [mem 0xf0000000-0xf003ffff pref] pci 0000:00:01.0: PCI bridge to [bus 15-1a] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xfdf00000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf00fffff pref] pci 0000:00:06.0: PCI bridge to [bus 12-14] pci 0000:02:00.0: PCI bridge to [bus 03-03] pci 0000:02:00.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:1c.0: PCI bridge to [bus 02-03] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:1c.2: PCI bridge to [bus 04-06] pci 0000:00:1c.3: PCI bridge to [bus 07-09] pci 0000:00:1c.4: PCI bridge to [bus 0a-0c] pci 0000:00:1c.5: PCI bridge to [bus 0d-11] pci 0000:01:02.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref] pci 0000:01:04.2: BAR 6: assigned [mem 0xfdc20000-0xfdc2ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 01-01] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfddfffff] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xfebfffff] pci_bus 0000:15: resource 0 [io 0x4000-0x4fff] pci_bus 0000:15: resource 1 [mem 0xfdf00000-0xfdffffff] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf00fffff pref] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfddfffff] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:01: resource 7 [mem 0xd8000000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:02.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5404k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800d3e5f000 - ffff8800d7e5f000 software IO TLB at phys 0xd3e5f000 - 0xd7e5f000 platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1331045624.764:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem Btrfs loaded msgmni has been set to 7906 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:01.0: irq 40 for MSI/MSI-X pcieport 0000:00:06.0: irq 41 for MSI/MSI-X pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 intel_idle: MWAIT substates: 0x20 intel_idle: does not run on family 6 model 15 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) ERST: Failed to get Error Log Address Range. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Non-volatile memory driver v1.3 Linux agpgart interface v0.103 brd: module loaded loop: module loaded Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfdbf0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.3.0-rc3+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.3.0-rc3+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001020 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.3.0-rc3+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.3.0-rc3+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 Refined TSC clocksource calibration: 2127.999 MHz. hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001060 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.3.0-rc3+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 Switching to clocksource tsc hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 23, io base 0x00003800 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 3.3.0-rc3+ uhci_hcd usb usb6: SerialNumber: 0000:01:04.4 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: RTC can wake from S4 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! rtc_cmos rtc_cmos: setting system clock to 2012-03-06 14:53:47 UTC (1331045627) Initializing network drop monitor service Freeing unused kernel memory: 1468k freed Write protecting the kernel read-only data: 12288k Freeing unused kernel memory: 1636k freed Freeing unused kernel memory: 1376k freed dracut: dracut-004-32.el6 udev: starting version 147 udevd (65): /proc/65/oom_adj is deprecated, please use /proc/65/oom_score_adj instead. [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). [drm] register mmio base: 0xFDDF0000 [drm] register mmio size: 65536 radeon 0000:01:02.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used) radeon 0000:01:02.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 2026242 kiB. [TTM] Initializing pool allocator. usb 6-1: new full-speed USB device number 2 using uhci_hcd [TTM] Initializing DMA pool allocator. [drm] radeon: 32M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] PCIE GART of 512M enabled (table at 0x0000000037880000). radeon 0000:01:02.0: WB disabled [drm] fence driver on ring 0 use gpu addr 0xb8000000 and cpu addr 0xffff880037817000 [drm] Loading R100 Microcode [drm] radeon: ring at 0x00000000B8001000 [drm] ring test succeeded in 1 usecs [drm] ib test succeeded in 0 usecs [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [drm] Encoders: [drm] CRT1: INTERNAL_DAC1 [drm] Connector 1: [drm] VGA [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [drm] Encoders: [drm] CRT2: INTERNAL_DAC2 [drm] fb mappable at 0xD8040000 [drm] vram apper at 0xD8000000 [drm] size 786432 [drm] fb depth is 8 [drm] pitch is 1024 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x48 fb0: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.13.0 20080528 for 0000:01:02.0 on minor 0 usb 6-1: New USB device found, idVendor=03f0, idProduct=1027 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Virtual Keyboard usb 6-1: Manufacturer: HP dracut: Starting plymouth daemon input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input1 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input2 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k. qla2xxx [0000:15:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc90000670000. qla2xxx [0000:15:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). qla2xxx 0000:15:00.0: irq 47 for MSI/MSI-X scsi0 : qla2xxx qla2xxx [0000:15:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. qla2xxx [0000:15:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:15:00.0 hdma+ host#=0 fw=5.03.02 (496). ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi1 : ata_piix scsi2 : ata_piix ata1: SATA max UDMA/133 cmd 0x1080 ctl 0x1088 bmdma 0x10a0 irq 20 ata2: SATA max UDMA/133 cmd 0x1090 ctl 0x1098 bmdma 0x10a8 irq 20 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata3: SATA max UDMA/133 cmd 0x10c0 ctl 0x10c8 bmdma 0x10e0 irq 20 ata4: SATA max UDMA/133 cmd 0x10d0 ctl 0x10d8 bmdma 0x10e8 irq 20 ata4: SATA link down (SStatus 0 SControl 300) ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: GB0750C8047, HPG1, max UDMA/133 ata1.00: 1465149168 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.01: ATA-7: GB0750C8047, HPG1, max UDMA/133 ata1.01: 1465149168 sectors, multi 8: LBA48 NCQ (depth 0/32) ata2.00: ATA-7: MTRON MSP-SATA7035, 0.18R1H3, max UDMA/133 ata2.00: 62504960 sectors, multi 1: LBA ata2.01: ATA-7: GB0750C8047, HPG1, max UDMA/133 ata2.01: 1465149168 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi: waiting for bus probes to complete ... ata2.00: configured for UDMA/133 ata2.01: configured for UDMA/133 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: HL-DT-STDVD-ROM GDR-R10N, 2.02, max UDMA/33 ata3.00: applying bridge limits ata3.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA GB0750C8047 HPG1 PQ: 0 ANSI: 5 scsi 1:0:1:0: Direct-Access ATA GB0750C8047 HPG1 PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA MTRON MSP-SATA70 0.18 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access ATA GB0750C8047 HPG1 PQ: 0 ANSI: 5 scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-R10N 2.02 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:1:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: [sdc] 62504960 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 2:0:1:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdd] Write Protect is off sd 2:0:1:0: [sdd] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sda: sda1 sdc: unknown partition table sd 2:0:1:0: [sdd] Attached SCSI disk sd 2:0:0:0: [sdc] Attached SCSI disk sd 1:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sd 1:0:1:0: [sdb] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 scsi 0:0:0:0: RAID HP HSV400 0952 PQ: 0 ANSI: 5 scsi 0:0:0:1: Direct-Access HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:0:1: [sde] 209715200 512-byte logical blocks: (107 GB/100 GiB) EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) scsi 0:0:1:0: RAID HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:0:1: [sde] Write Protect is off sd 0:0:0:1: [sde] Mode Sense: 97 00 10 08 scsi 0:0:1:1: Direct-Access HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:0:1: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:1:1: [sdf] 209715200 512-byte logical blocks: (107 GB/100 GiB) scsi 0:0:2:0: RAID HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:1:1: [sdf] Write Protect is off sd 0:0:1:1: [sdf] Mode Sense: 97 00 10 08 sde: unknown partition table scsi 0:0:2:1: Direct-Access HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:1:1: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:2:1: [sdg] 209715200 512-byte logical blocks: (107 GB/100 GiB) scsi 0:0:3:0: RAID HP HSV400 0952 PQ: 0 ANSI: 5 sd 0:0:0:1: [sde] Attached SCSI disk dracut: Mounted root filesystem /dev/sdb3 sd 0:0:2:1: [sdg] Write Protect is off sd 0:0:2:1: [sdg] Mode Sense: 97 00 10 08 scsi 0:0:3:1: Direct-Access HP HSV400 0952 PQ: 0 ANSI: 5 sdf: unknown partition table sd 0:0:2:1: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:0:1:1: [sdf] Attached SCSI disk sd 0:0:3:1: [sdh] 209715200 512-byte logical blocks: (107 GB/100 GiB) scsi 0:0:4:0: RAID IBM 2810XIV-LUN-0 10.2 PQ: 0 ANSI: 5 sdg: unknown partition table sd 0:0:3:1: [sdh] Write Protect is off sd 0:0:3:1: [sdh] Mode Sense: 97 00 10 08 scsi 0:0:5:0: RAID IBM 2810XIV-LUN-0 10.2 PQ: 0 ANSI: 5 sd 0:0:2:1: [sdg] Attached SCSI disk sd 0:0:3:1: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA scsi 0:0:6:0: RAID IBM 2810XIV-LUN-0 10.2 PQ: 0 ANSI: 5 sdh: unknown partition table sd 0:0:3:1: [sdh] Attached SCSI disk scsi 0:0:7:1: Direct-Access NETAPP LUN 8020 PQ: 0 ANSI: 5 sd 0:0:7:1: [sdi] 629225472 512-byte logical blocks: (322 GB/300 GiB) scsi 0:0:8:0: RAID IBM 2810XIV-LUN-0 10.2 PQ: 0 ANSI: 5 sd 0:0:7:1: [sdi] Write Protect is off sd 0:0:7:1: [sdi] Mode Sense: bd 00 00 08 sd 0:0:7:1: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA dracut: Switching root scsi 0:0:9:1: Direct-Access NETAPP LUN 8020 PQ: 0 ANSI: 5 scsi 0:0:10:1: Direct-Access NETAPP LUN 8020 PQ: 0 ANSI: 5 sd 0:0:9:1: [sdj] 629225472 512-byte logical blocks: (322 GB/300 GiB) sdi: unknown partition table scsi 0:0:11:1: Direct-Access NETAPP LUN 8020 PQ: 0 ANSI: 5 sd 0:0:10:1: [sdk] 629225472 512-byte logical blocks: (322 GB/300 GiB) sd 0:0:11:1: [sdl] 629225472 512-byte logical blocks: (322 GB/300 GiB) sd 0:0:9:1: [sdj] Write Protect is off sd 0:0:9:1: [sdj] Mode Sense: bd 00 00 08 sd 0:0:10:1: [sdk] Write Protect is off sd 0:0:10:1: [sdk] Mode Sense: bd 00 00 08 sd 0:0:7:1: [sdi] Attached SCSI disk sd 0:0:9:1: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:10:1: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:11:1: [sdl] Write Protect is off sd 0:0:11:1: [sdl] Mode Sense: bd 00 00 08 sd 0:0:11:1: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdl: unknown partition table sdj: unknown partition table sdk: unknown partition table sd 0:0:11:1: [sdl] Attached SCSI disk sd 0:0:9:1: [sdj] Attached SCSI disk sd 0:0:10:1: [sdk] Attached SCSI disk readahead: starting udev: starting version 147 SMP alternatives: switching to SMP code WARNING! power/level is deprecated; use power/control instead EDAC MC: Ver: 2.1.0 Booting Node 0 Processor 3 APIC 0x3 smpboot cpu 3: start_ip = 9a000 EDAC MC0: Giving out device to 'i3200_edac' 'i3200': DEV 0000:00:00.0 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0 Processor 2 APIC 0x1 smpboot cpu 2: start_ip = 9a000 NMI watchdog enabled, takes one hw-pmu counter. Booting Node 0 Processor 1 APIC 0x2 smpboot cpu 1: start_ip = 9a000 NMI watchdog enabled, takes one hw-pmu counter. sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:1:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:1:0: Attached scsi generic sg3 type 0 sr 3:0:0:0: Attached scsi generic sg4 type 5 scsi 0:0:0:0: Attached scsi generic sg5 type 12 sd 0:0:0:1: Attached scsi generic sg6 type 0 scsi 0:0:1:0: Attached scsi generic sg7 type 12 sd 0:0:1:1: Attached scsi generic sg8 type 0 scsi 0:0:2:0: Attached scsi generic sg9 type 12 sd 0:0:2:1: Attached scsi generic sg10 type 0 scsi 0:0:3:0: Attached scsi generic sg11 type 12 sd 0:0:3:1: Attached scsi generic sg12 type 0 scsi 0:0:4:0: Attached scsi generic sg13 type 12 scsi 0:0:5:0: Attached scsi generic sg14 type 12 scsi 0:0:6:0: Attached scsi generic sg15 type 12 sd 0:0:7:1: Attached scsi generic sg16 type 0 scsi 0:0:8:0: Attached scsi generic sg17 type 12 sd 0:0:9:1: Attached scsi generic sg18 type 0 sd 0:0:10:1: Attached scsi generic sg19 type 0 sd 0:0:11:1: Attached scsi generic sg20 type 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0960) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: PC Speaker as /devices/platform/pcspkr/input/input3 tg3.c:v3.122 (December 7, 2011) tg3 0000:03:04.0: eth0: Tigon3 [partno(N/A) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:21:5a:08:dc:18 tg3 0000:03:04.0: eth0: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:03:04.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] tg3 0000:03:04.0: eth0: dma_rwctrl[76148000] dma_mask[40-bit] tg3 0000:03:04.1: eth1: Tigon3 [partno(N/A) rev 9003] (PCIX:133MHz:64-bit) MAC address 00:21:5a:08:dc:19 tg3 0000:03:04.1: eth1: attached PHY is 5714 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:03:04.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:03:04.1: eth1: dma_rwctrl[76148000] dma_mask[40-bit] hpwdt: New timer passed in is 30 seconds. hpwdt 0000:01:04.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). hpwdt 0000:01:04.0: Unable to register miscdev on minor=130 (err=-16). hpwdt: probe of 0000:01:04.0 failed with error -16 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: [mem 0xfdcf0000-0xfdcf00ff] regsize 1 spacing 1 irq 22 ipmi_si: Adding PCI-specified kcs state machine ipmi_si: probing via ACPI ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si: Adding ACPI-specified kcs state machine ipmi_si: probing via SMBIOS ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface ipmi_si: probing via SPMI ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0 ipmi_si: Adding SPMI-specified kcs state machine duplicate interface ipmi_si: Trying PCI-specified kcs state machine at mem address 0xfdcf0000, slave address 0x0, irq 22 ipmi_si 0000:01:04.6: Using irq 22 ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x11) ipmi_si 0000:01:04.6: IPMI kcs interface initialized device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.3.0 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: table: 253:2: multipath: error getting device device-mapper: ioctl: error adding target to table device-mapper: table: 253:2: multipath: error getting device device-mapper: ioctl: error adding target to table EXT4-fs (sdb3): re-mounted. Opts: (null) kjournald starting. Commit interval 5 seconds EXT3-fs (sdb1): using internal journal EXT3-fs (sdb1): mounted filesystem with ordered data mode NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) tg3 0000:03:04.0: irq 48 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready tg3 0000:03:04.0: eth0: Link is up at 1000 Mbps, full duplex tg3 0000:03:04.0: eth0: Flow control is off for TX and off for RX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. eth0: no IPv6 routers present