[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+55aFxZsVxkxifR+EUZi=RsUGKfs5vYXX3nN_M_Az1BY5yyaw@mail.gmail.com>
Date: Mon, 5 Mar 2012 16:34:00 -0800
From: Linus Torvalds <torvalds@...ux-foundation.org>
To: Stefan Lippers-Hollmann <s.L-H@....de>
Cc: Sven Joachim <svenjoac@....de>,
Greg KH <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, stable@...r.kernel.org,
akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
Thomas Gleixner <tglx@...utronix.de>,
Jonathan Nieder <jrnieder@...il.com>,
linux-wireless@...r.kernel.org
Subject: Re: [ 57/72] genirq: Unmask oneshot irqs when thread was not woken
Thomas, should we just plan on reverting that commit from mainline? It
clearly causes regressions.
Linus
On Sun, Mar 4, 2012 at 4:43 PM, Stefan Lippers-Hollmann <s.L-H@....de> wrote:
> Hi
>
> On Monday 05 March 2012, Sven Joachim wrote:
>> On 2012-02-28 02:05 +0100, Greg KH wrote:
>>
>> > 3.2-stable review patch. If anyone has any objections, please let me know.
>>
>> Alas, the commit below broke the WiFi on my laptop, where
>> "iwlist wlan0 scan" now just reports: " wlan0 No scan results".
>>
>> This is not specific to 3.2, the same problem exists in 3.0.23 and
>> 3.3-rc6 while previous releases worked.
>
> I can confirm this regression on an old PIII based notebook with a
> 32 bit BCM4306/3 PCMCIA card:
>
> 02:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
> Subsystem: Linksys WPC54G v1 / WPC54GS v1 802.11g Wireless-G Notebook Adapter [1737:4320]
> Flags: bus master, fast devsel, latency 64, IRQ 10
> Memory at 20000000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
> Kernel driver in use: b43-pci-bridge
>
> I can observe these differences in the dmesg output (3.2.9 + current
> stable queue-3.2):
>
> The kernel configuration is identical in both cases, the only
> difference is "genirq: Unmask oneshot irqs when thread was not woken"
> being applied or not.
>
> --- working <-- 3.2.9 + current stable queue-3.2, with "genirq: Unmask oneshot irqs when thread was not woken" reverted
> +++ broken <-- 3.2.9 + current stable queue-3.2
> @@ -125,6 +125,7 @@ Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> Initializing cgroup subsys blkio
> Initializing cgroup subsys perf_event
> +CPU serial number disabled.
> mce: CPU supports 5 MCE banks
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 8k freed
> @@ -137,9 +138,16 @@ SMP disabled
> Performance Events:
> no APIC, boot with the "lapic" boot parameter to force-enable it.
> no hardware sampling interrupt available.
> -Broken PMU hardware detected, using software events only.
> +p6 PMU driver.
> +... version: 0
> +... bit width: 32
> +... generic registers: 2
> +... value mask: 00000000ffffffff
> +... max period: 000000007fffffff
> +... fixed-purpose events: 0
> +... event mask: 0000000000000003
> Brought up 1 CPUs
> Total of 1 processors activated (1989.75 BogoMIPS).
> devtmpfs: initialized
> PM: Registering ACPI NVS region at eeff000 (4096 bytes)
> print_constraints: dummy:
> @@ -174,12 +182,12 @@ pci 0000:00:00.0: reg 10: [mem 0xec00000
> type 1 class 0x000604
> pci 0000:00:01.0: supports D1
> type 2 class 0x000607
> -pci 0000:00:04.0: reg 10: [mem 0x10000000-0x10000fff]
> +pci 0000:00:04.0: reg 10: [mem 0x00000000-0x00000fff]
> pci 0000:00:04.0: supports D1 D2
> pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:00:04.0: PME# disabled
> type 2 class 0x000607
> -pci 0000:00:04.1: reg 10: [mem 0x14000000-0x14000fff]
> +pci 0000:00:04.1: reg 10: [mem 0x00000000-0x00000fff]
> pci 0000:00:04.1: supports D1 D2
> pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:00:04.1: PME# disabled
> @@ -299,6 +307,10 @@ pnp: PnP ACPI: found 11 devices
> ACPI: ACPI bus type pnp unregistered
> Switching to clocksource acpi_pm
> PCI: max bus depth: 1 pci_try_num: 2
> +pci 0000:00:04.0: BAR 0: assigned [mem 0x10000000-0x10000fff]
> +(PCI address [0x10000000-0x10000fff])
> +pci 0000:00:04.1: BAR 0: assigned [mem 0x14000000-0x14000fff]
> +(PCI address [0x14000000-0x14000fff])
> pci 0000:00:11.0: BAR 6: assigned [mem 0x10020000-0x1003ffff pref]
> pci 0000:00:04.1: BAR 16: assigned [mem 0x18000000-0x1bffffff]
> pci 0000:00:04.1: BAR 15: assigned [mem 0x1c000000-0x1fffffff pref]
> @@ -326,9 +338,11 @@ pci 0000:00:01.0: setting latency timer
> enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> -> GSI 10 (level, low) -> IRQ 10
> +pci 0000:00:04.0: setting latency timer to 64
> enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> -> GSI 11 (level, low) -> IRQ 11
> +pci 0000:00:04.1: setting latency timer to 64
> pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
> pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
> @@ -562,20 +576,6 @@ b43-phy0: Hardware crypto acceleration n
> b43-phy0: QoS not supported by firmware
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> NET: Registered protocol family 17
> -wlan0: authenticate with [redacted MAC address] (try 1)
> -wlan0: authenticated
> -wlan0: associate with [redacted MAC address] (try 1)
> -wlan0: RX AssocResp from [redacted MAC address] (capab=0x411 status=0 aid=1)
> -wlan0: associated
> -ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> -cfg80211: Calling CRDA for country: DE
> -Intel AES-NI instructions are not detected.
> -cfg80211: Regulatory domain changed to country: DE
> -cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> -cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
> -cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> -cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> -cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
> lp0: using parport0 (interrupt-driven).
> lp0: console ready
> ppdev: user-space parallel port driver
> @@ -589,4 +589,3 @@ mtrr: base(0xf2000000) is not aligned on
> agpgart-via 0000:00:00.0: AGP 2.0 bridge
> agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
> pci 0000:01:00.0: putting AGP V2 device into 0x mode
> -wlan0: no IPv6 routers present
>
> While I don't get any revealing error messages, once "genirq: Unmask
> oneshot irqs when thread was not woken" is applied the wlan card
> stops working (no scan results, unable to auth).
>
> I cannot reproduce this problem on a different amd64/ 64 bit system
> with a BCM4318 PCI card, which continues to work fine.
>
> Regards
> Stefan Lippers-Hollmann
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists