| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 7 Mar 2012 19:50:45 +0800
From: Daniel Kurtz <djkurtz@...omium.org>
To: Keith Packard <keithp@...thp.com>, David Airlie <airlied@...ux.ie>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Cc: Benson Leung <bleung@...omium.org>,
Yufeng Shen <miletus@...omium.org>,
Sameer Nanda <snanda@...omium.org>,
Daniel Kurtz <djkurtz@...omium.org>
Subject: [PATCH 4/9] drm/i915/intel_i2c: cleanup gmbus/gpio pin assignments
There is no "disabled" port 0. So, don't even try to initialize/scan
it, etc. This saves a bit of time when initializing the driver, since
the we can avoid a 50ms timeout waiting for a device to respond on
a port that doesn't even exist.
Similarly, don't initialize the reserved port, either.
Tested on Sandybridge (gen 6, PCH == CougarPoint) hardware.
Signed-off-by: Daniel Kurtz <djkurtz@...omium.org>
---
drivers/gpu/drm/i915/i915_reg.h | 1 -
drivers/gpu/drm/i915/intel_i2c.c | 64 ++++++++++++++++++--------------------
2 files changed, 30 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 56af0df..89cace2 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -699,7 +699,6 @@
#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */
#define GMBUS_PORT_DPD 6 /* HDMID */
#define GMBUS_PORT_RESERVED 7 /* 7 reserved */
-#define GMBUS_NUM_PORTS 8
#define GMBUS1 0x5104 /* command/status */
#define GMBUS_SW_CLR_INT (1<<31)
#define GMBUS_SW_RDY (1<<30)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index dd8c699..b2cc7f2 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -35,6 +35,20 @@
#include "i915_drm.h"
#include "i915_drv.h"
+struct gmbus_port {
+ const char *name;
+ int reg;
+};
+
+static const struct gmbus_port gmbus_ports[] = {
+ { "ssc", GPIOB },
+ { "vga", GPIOA },
+ { "panel", GPIOC },
+ { "dpc", GPIOD },
+ { "dpb", GPIOE },
+ { "dpd", GPIOF },
+};
+
/* Intel GPIO access functions */
#define I2C_RISEFALL_TIME 20
@@ -150,32 +164,23 @@ static void set_data(void *data, int state_high)
static struct i2c_adapter *
intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
{
- static const int map_pin_to_reg[] = {
- 0,
- GPIOB,
- GPIOA,
- GPIOC,
- GPIOD,
- GPIOE,
- GPIOF,
- 0,
- };
struct intel_gpio *gpio;
- if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
+ pin -= 1; /* NB: -1 to map pin pair to gmbus array index */
+ if (pin >= ARRAY_SIZE(gmbus_ports))
return NULL;
gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);
if (gpio == NULL)
return NULL;
- gpio->reg = map_pin_to_reg[pin];
+ gpio->reg = gmbus_ports[pin].reg;
if (HAS_PCH_SPLIT(dev_priv->dev))
gpio->reg += PCH_GPIOA - GPIOA;
gpio->dev_priv = dev_priv;
snprintf(gpio->adapter.name, sizeof(gpio->adapter.name),
- "i915 GPIO%c", "?BACDE?F"[pin]);
+ "i915 GPIO%c", "BACDEF"[pin]);
gpio->adapter.owner = THIS_MODULE;
gpio->adapter.algo_data = &gpio->algo;
gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
@@ -370,33 +375,22 @@ static const struct i2c_algorithm gmbus_algorithm = {
*/
int intel_setup_gmbus(struct drm_device *dev)
{
- static const char *names[GMBUS_NUM_PORTS] = {
- "disabled",
- "ssc",
- "vga",
- "panel",
- "dpc",
- "dpb",
- "dpd",
- "reserved",
- };
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
- dev_priv->gmbus = kcalloc(sizeof(struct intel_gmbus), GMBUS_NUM_PORTS,
- GFP_KERNEL);
+ dev_priv->gmbus = kcalloc(sizeof(struct intel_gmbus),
+ ARRAY_SIZE(gmbus_ports), GFP_KERNEL);
if (dev_priv->gmbus == NULL)
return -ENOMEM;
- for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+ for (i = 0; i < ARRAY_SIZE(gmbus_ports); i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
+ int port = i + 1; /* +1 to map gmbus index to pin pair */
bus->adapter.owner = THIS_MODULE;
bus->adapter.class = I2C_CLASS_DDC;
- snprintf(bus->adapter.name,
- sizeof(bus->adapter.name),
- "i915 gmbus %s",
- names[i]);
+ snprintf(bus->adapter.name, sizeof(bus->adapter.name),
+ "i915 gmbus %s", gmbus_ports[i].name);
bus->adapter.dev.parent = &dev->pdev->dev;
bus->adapter.algo_data = dev_priv;
@@ -407,10 +401,10 @@ int intel_setup_gmbus(struct drm_device *dev)
goto err;
/* By default use a conservative clock rate */
- bus->reg0 = i | GMBUS_RATE_100KHZ;
+ bus->reg0 = port | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
- bus->force_bit = intel_gpio_create(dev_priv, i);
+ bus->force_bit = intel_gpio_create(dev_priv, port);
}
intel_i2c_reset(dev_priv->dev);
@@ -430,7 +424,9 @@ err:
struct i2c_adapter *intel_gmbus_get_bus(struct drm_i915_private *dev_priv,
int pin)
{
- return (pin < GMBUS_NUM_PORTS) ? &dev_priv->gmbus[pin].adapter : NULL;
+ pin -= 1; /* NB: -1 to map pin pair to gmbus array index */
+ return (pin < ARRAY_SIZE(gmbus_ports)) ?
+ &dev_priv->gmbus[pin].adapter : NULL;
}
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
@@ -467,7 +463,7 @@ void intel_teardown_gmbus(struct drm_device *dev)
if (dev_priv->gmbus == NULL)
return;
- for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+ for (i = 0; i < ARRAY_SIZE(gmbus_ports); i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
if (bus->force_bit) {
i2c_del_adapter(bus->force_bit);
--
1.7.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists