[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20120309235036.05D933E0950@localhost>
Date: Fri, 09 Mar 2012 16:50:35 -0700
From: Grant Likely <grant.likely@...retlab.ca>
To: Tomoya MORINAGA <tomoya.rohm@...il.com>,
spi-devel-general@...ts.sourceforge.net,
linux-kernel@...r.kernel.org
Cc: qi.wang@...el.com, yong.y.wang@...el.com, joel.clark@...el.com,
kok.howg.ewe@...el.com, Wolfram Sang <w.sang@...gutronix.de>
Subject: Re: [PATCH 1/4] spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info
On Thu, 19 Jan 2012 11:34:43 +0900, Tomoya MORINAGA <tomoya.rohm@...il.com> wrote:
> Hi Grant.
>
> More than a month has been passed since I posted the following patches.
> However still not reviewed yet.
>
> [PATCH 1/4] spi-topcliff-pch: Modify pci-bus number dynamically to get
> DMA device info
> [PATCH 2/4] spi-topcliff-pch: Fix issue for transmitting over 4KByte
> [PATCH 3/4][RESEND] spi-topcliff-pch: supports a spi mode setup and
> bit order setup by IO control
> [PATCH 4/4] spi-topcliff-pch: add recovery processing in case wait-event timeout
>
> Could you review these ?
I'm working through my backlog now. A big part of the problem is my
method of dealing with pending patches really sucked. I've switched
to using notmuch-vim, which seems to be a much better system for tracking
email that I need to pay attention to.
g.
>
> thanks,
> tomoya
>
> 2011/12/9 Tomoya MORINAGA <tomoya.rohm@...il.com>:
> > Signed-off-by: Tomoya MORINAGA <tomoya.rohm@...il.com>
> > ---
> > drivers/spi/spi-topcliff-pch.c | 3 ++-
> > 1 files changed, 2 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
> > index 99ec279..fcd9462 100644
> > --- a/drivers/spi/spi-topcliff-pch.c
> > +++ b/drivers/spi/spi-topcliff-pch.c
> > @@ -920,7 +920,8 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
> > dma_cap_set(DMA_SLAVE, mask);
> >
> > /* Get DMA's dev information */
> > - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(12, 0));
> > + dma_dev = pci_get_bus_and_slot(data->board_dat->pdev->bus->number,
> > + PCI_DEVFN(12, 0));
> >
> > /* Set Tx DMA */
> > param = &dma->param_tx;
> > --
> > 1.7.4.4
> >
--
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies,Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists