[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120314085252.GK18320@game.jcrosoft.org>
Date: Wed, 14 Mar 2012 09:52:52 +0100
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@...osoft.com>
To: Dong Aisheng <aisheng.dong@...escale.com>
Cc: Dong Aisheng-B29396 <B29396@...escale.com>,
"devicetree-discuss@...ts.ozlabs.org"
<devicetree-discuss@...ts.ozlabs.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"vinod.koul@...ux.intel.com" <vinod.koul@...ux.intel.com>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"rob.herring@...xeda.com" <rob.herring@...xeda.com>,
"rdunlap@...otime.net" <rdunlap@...otime.net>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"cjb@...top.org" <cjb@...top.org>
Subject: Re: [PATCH v1 2/5] mmc: mxs-mmc: add dt probe support
On 16:09 Wed 14 Mar , Dong Aisheng wrote:
> On Wed, Mar 14, 2012 at 03:23:43PM +0800, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > On 16:47 Tue 13 Mar , Dong Aisheng wrote:
> > > From: Dong Aisheng <dong.aisheng@...aro.org>
> > >
> > > Signed-off-by: Dong Aisheng <dong.aisheng@...aro.org>
> > >
> > > ---
> > > The patch is still using a private way for dma part binding
> > > since the common dma binding is still under discussion.
> > > http://www.spinics.net/lists/linux-omap/msg65528.html
> > >
> > > Will update to use common dma binding when it hits mainline.
> > > ---
> > > .../devicetree/bindings/mmc/fsl-mxs-mmc.txt | 23 ++++++
> > > drivers/mmc/host/mxs-mmc.c | 82 +++++++++++++++++++-
> > > 2 files changed, 102 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt
> > > new file mode 100644
> > > index 0000000..adc1142
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mmc/fsl-mxs-mmc.txt
> > > @@ -0,0 +1,23 @@
> > > +* FREESCALE MXS MMC peripheral
> > > +
> > > +Required properties:
> > > +- compatible : Should be "fsl,<chip>-mmc"
> > > +- reg : Should contain registers location and length
> > > +- interrupts : Should contain interrupt.
> > > + The format is <irq_err irq_dma>.
> > > +- dma_channel: Should contain the dma channel it uses
> > > +
> > > +Optional properties:
> > > +- wp-gpios : Specify GPIOs for write protection
> > > +- slot-4bit: Specify 4 bit mode support
> > > +- slot-8bit: Specify 8 bit and 4 bit mode support
> > > +
> > > +Examples:
> > > +mmc1: ssp@...10000 {
> > > + compatible = "fsl,imx28-mmc";
> > > + reg = <0x80010000 2000>;
> > > + /* <irq_err irq_dma> */
> > > + interrupts = <96 82>;
> > > + dma_channel = <0>;
> > > + slot-8bit;
> > > +};
> > > diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> > > index 382c835..6cf2d17 100644
> > > --- a/drivers/mmc/host/mxs-mmc.c
> > > +++ b/drivers/mmc/host/mxs-mmc.c
> > > @@ -38,6 +38,10 @@
> > > #include <linux/gpio.h>
> > > #include <linux/regulator/consumer.h>
> > > #include <linux/module.h>
> > > +#include <linux/of.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/of_gpio.h>
> > > +#include <linux/slab.h>
> > >
> > > #include <mach/mxs.h>
> > > #include <mach/common.h>
> > > @@ -673,17 +677,79 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
> > > return true;
> > > }
> > >
> > > +#ifdef CONFIG_OF
> > > +static struct resource * __devinit mxs_mmc_get_of_dmares(
> > > + struct platform_device *pdev)
> > > +{
> > > + struct device_node *np = pdev->dev.of_node;
> > > + struct resource *dmares;
> > > + int ret;
> > > +
> > > + if (!np)
> > > + return NULL;
> > > +
> > > + dmares = kzalloc(sizeof(*dmares), GFP_KERNEL);
> > > + dmares->flags = IORESOURCE_DMA;
> > > + ret = of_property_read_u32(np, "dma_channel", &dmares->start);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "unable to get dmares from dt\n");
> > > + return NULL;
> > > + }
> > > + dmares->end = dmares->start;
> > > +
> > > + return dmares;
> > > +}
> > > +
> > > +static int __devinit mxs_mmc_get_of_property(struct platform_device *pdev,
> > > + struct mxs_mmc_platform_data **ppdata)
> > > +{
> > > + struct device_node *np = pdev->dev.of_node;
> > > + struct mxs_mmc_platform_data *pdata = *ppdata;
> > > +
> > > + if (!np)
> > > + return -ENODEV;
> > > +
> > > + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> > > +
> > > + if (of_get_property(np, "slot-8bit", NULL))
> > > + pdata->flags |= SLOTF_8_BIT_CAPABLE;
> > > +
> > > + if (of_get_property(np, "slot-4bit", NULL))
> > > + pdata->flags |= SLOTF_4_BIT_CAPABLE;
> > it will conflit if both binding are set use a number instead
> >
> Hmm, i did not see conflict, can you explain more?
> The "slot-8bit" includes the support for 4bit.(see binding doc)
> Even user define them two property in dt by mistake, it does not cause conflict.
> See:
> if (pdata) {
> if (pdata->flags & SLOTF_8_BIT_CAPABLE)
> mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
> if (pdata->flags & SLOTF_4_BIT_CAPABLE)
> mmc->caps |= MMC_CAP_4_BIT_DATA;
> }
this is mmc specifc sohould have a generic binding
Best Regards,
J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists